Filament PLA PLA+ PETG ABS PLA Meta PLA Matte PLA High-Speed
Filament Diameter 1,75mm 1,75mm 1,75mm 1,75mm 1,75mm 1,75mm 1,75mm
Tolerance ±0.02mm ±0.02mm ±0.02mm ±0.03mm ±0.02mm ±0.03mm ±0.02mm
Printing Temperature 200-210℃ 205-215℃ 220-230℃ 250-260℃ 185-195℃ 205-215℃ 190-210℃
Platform Temperature 50-60℃ 50-60℃ 60-70℃ 80-100℃ 50-60℃ 50-60℃ 50-60℃
Printing Speed 50-100MM/s 50-100MM/s 40-60MM/s 40-60MM/s 50-150MM/s 50-100MM/s 190-210℃,  50-150mm/s
210-230℃,  150-300mm/s
230-260℃,  300-600mm/s
Heat Deflection Temperature 53℃ 53℃ 63℃ 84℃ 53℃ 53℃ 53℃
Elongation at Break 3.1% 3.6% 5.3% 7.8% 17% 9.6% 3.6%
Net Weight 1.1 KG 1.1 KG 1.1 KG 0.65 KG 1.1 KG 1.1 KG 1.1 KG
               
Filament PLA Luminous (Glow in the Dark) PLA Carbon Fiber PLA Marble WOOD Silk PLA+ Easy ABS TPU
(95A)		 TPU SILK
(98A)
Filament Diameter 1,75mm 1,75mm 1,75mm 1,75mm 1,75mm 1,75mm 1,75mm 1,75mm
Tolerance ±0.02mm ±0.02mm ±0.03mm ±0.03mm ±0.02mm ±0.03mm ±0.03mm ±0.03mm
Printing Temperature 200-210℃ 215-225℃ 210-220℃ 205-215℃ 205-215℃ 225-235℃ 195-205℃ 210-220℃
Platform Temperature 50-60℃ 50-60℃ 50-60℃ 50-60℃ 50-60℃ 60-70℃ 50-60℃ 50-60℃
Printing Speed 40-60mm/s 40-60MM/s 40-60MM/s 40-60MM/s 40-60MM/s 40-60MM/s Direct Drive Extrusion: 40MM/s
Bowden Extrusion: 20MM/s		 Direct Drive Extrusion: 50MM/s
Bowden Extrusion: 30MM/s
Heat Deflection Temperature 53℃ 53℃ 53℃ 53℃ 53℃ 57.9℃ 52℃ 131℃
Elongation at Break 21% 4.1% 3.1% 8.1% 6.3% 20% 536% 436%
Net Weight 1.1 KG 1.1 KG 1.1 KG 1.1 KG 1.1 KG 0.65 KG 0.5 KG 1.1 KG
High Mobility
JAYO New 3D Filament PLA-Meta has high fluidity, tested, its fluidity is 1.5 times higher than ordinary PLA and PLA+.
Neatly Arranged
JAYO Upgraded new 3D Filament PLA-Meta 100% ensure that the filament are neat. No knots, No Tangles.
 High Compatibility
With ultra-high compatibility, it is not only compatible with 99% of FDM 3D printers, but also compatible with JAYO Filament Dryer S1/S1 PLUS/ S2 full range of drying boxs.		 Suitable for High-speed Printing
PLA-Meta Filament still maintains a very high success rate under high-speed printing. The maximum printing speed can reach 250mm/s. Improve your printing efficiency.
 
 
 
 
Compatible with any 3D Printer that uses 1.75mm diameter filament including some models for your reference
AirWolf ColorFabb Dremel MakerBot PowerSpec Simplify3D
Aleph Objects CraftBot e-NABLE Makergear Printrbot SUNLU
Anycubic CraftUnique E3D Markforged Prusa Ultimaker
Beeverycreative CubePro FlashForge New Matter Prusa Research XYZprinting
BigBox Cubicon Kossel Ooznest Robo 3D Zenith
CEL Doob Lulzbot OrdBot SeeMeCNC Zortrax

On 19/09/2024 at 20:17:57 AEST, seller added the following information:

DataCaciques