Product Overview
Details
Two matched Hall switches on a substrate
Dual quadrature outputs
Superior temperature stability
High sensitivity (BOP and BRP)
Supports a wide voltage range (2.5V~24V)
Built-in pull-up resistor
Reverse battery protection
| MODEL | VOLTAGE | NO-LOAD | ATMAXIMUM EFFICIENCY | STALL | REDUCER | LENTH | |||||
RATED | SPEED | CURRENT | SPEED | CURRENT | TORQUE | POWER | CURRENT | TORQUE | |||
| Volt | r/min | A | r/min | A | Kg·cm | W | A | Kg·cm | Ratio | mm | |
| TS-25GA370 | 12V | 10 | 0.12 | 8 | 0.55 | 10.0 | 2.5 | 2.0 | / | 1:217 | 27 |
| 15 | 0.12 | 12 | 0.55 | 8.0 | 2.5 | 2.0 | / | 1:217 | 27 | ||
| 25 | 0.12 | 20 | 0.55 | 5.5 | 2.5 | 2.0 | / | 1:217 | 25 | ||
| 35 | 0.12 | 28 | 0.55 | 4.5 | 2.5 | 2.0 | 13.5 | 1:165 | 25 | ||
| 60 | 0.15 | 45 | 0.65 | 2.8 | 2.5 | 2.0 | 11.6 | 1:98 | 23 | ||
| 80 | 0.15 | 80 | 0.65 | 1.6 | 2.5 | 2.0 | 5.2 | 1:75 | 23 | ||
| 130 | 0.15 | 100 | 0.65 | 1.2 | 2.5 | 2.0 | 4.8 | 1:45 | 21 | ||
| 150 | 0.15 | 120 | 0.65 | 0.95 | 2.5 | 2.0 | 3.5 | 1:34 | 21 | ||
| 300 | 0.15 | 240 | 0.65 | 0.50 | 2.5 | 2.0 | 2.5 | 1:20 | 19 | ||
| 600 | 0.15 | 480 | 0.65 | 0.25 | 2.5 | 2.0 | 1.0 | 1:10 | 19 | ||
| 24V | 10 | 0.10 | 8 | 0.40 | 10.0 | 2.5 | 2.0 | / | 1:217 | 27 | |
| 15 | 0.10 | 12 | 0.40 | 8.0 | 2.5 | 2.0 | / | 1:217 | 27 | ||
| 25 | 0.10 | 20 | 0.40 | 5.8 | 2.5 | 2.0 | / | 1:217 | 25 | ||
| 35 | 0.10 | 28 | 0.40 | 5.0 | 2.5 | 2.0 | 14.0 | 1:165 | 25 | ||
| 60 | 0.11 | 45 | 0.55 | 2.5 | 2.5 | 2.0 | 11.5 | 1:98 | 23 | ||
| 80 | 0.12 | 80 | 0.55 | 1.5 | 2.5 | 2.0 | 5.0 | 1:75 | 23 | ||
| 130 | 0.12 | 100 | 0.55 | 1.2 | 2.5 | 2.0 | 4.8 | 1:45 | 21 | ||
| 150 | 0.12 | 120 | 0.55 | 0.85 | 2.5 | 2.0 | 3.5 | 1:34 | 21 | ||
| 300 | 0.12 | 240 | 0.55 | 0.50 | 2.5 | 2.0 | 2.5 | 1:20 | 19 | ||
| 600 | 0.12 | 480 | 0.55 | 0.25 | 2.5 | 2.0 | 1.0 | 1:10 | 19 | ||
The rear of the motor is equipped with a dual channel Holzer effect encoder, AB dual output, single circuit per cycle pulse 12PPR, double down the road, a total output of 48CPR. Phase difference 90 degrees.
The two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor shaft. The quadrature encoder provides a resolution of 48counts per revolution of the motor shaft. To compute the counts per revolution of the gearbox output, multiply the gear ratio by 48.
Specifications:
Product type: DC Gear motor with two-channel Hall effect encoder
Rated Voltage: 12V/24V
No-Load Speed: 300RPM
No-Load Current: ≤ 0.15A
Rated Torque: 0.8kg.cm
Main Body Dimensions:66.8 x 25mm / 2.63in x 0.99in (L*D)
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off
Package Listing: 1PCS x DC Geared Motor
Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20
Each Loop Output Pulses: 12PPR 20*12=240PPR
Wiring Diagram:
- Red - Motor power terminal （+）
- Black - Motor power terminal （-）
- Green - Quad encoder Ground
- Blue - Quad encoder +5V Vcc
- Yellow - Quad encoder A signal
- White - Quad encoder B signal
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2018 DataCaciques
Product Overview
Details
Two matched Hall switches on a substrate
Dual quadrature outputs
Superior temperature stability
High sensitivity (BOP and BRP)
Supports a wide voltage range (2.5V~24V)
Built-in pull-up resistor
Reverse battery protection
| MODEL | VOLTAGE | NO-LOAD | ATMAXIMUM EFFICIENCY | STALL | REDUCER | LENTH | |||||
RATED | SPEED | CURRENT | SPEED | CURRENT | TORQUE | POWER | CURRENT | TORQUE | |||
| Volt | r/min | A | r/min | A | Kg·cm | W | A | Kg·cm | Ratio | mm | |
| TS-25GA370 | 12V | 10 | 0.12 | 8 | 0.55 | 10.0 | 2.5 | 2.0 | / | 1:217 | 27 |
| 15 | 0.12 | 12 | 0.55 | 8.0 | 2.5 | 2.0 | / | 1:217 | 27 | ||
| 25 | 0.12 | 20 | 0.55 | 5.5 | 2.5 | 2.0 | / | 1:217 | 25 | ||
| 35 | 0.12 | 28 | 0.55 | 4.5 | 2.5 | 2.0 | 13.5 | 1:165 | 25 | ||
| 60 | 0.15 | 45 | 0.65 | 2.8 | 2.5 | 2.0 | 11.6 | 1:98 | 23 | ||
| 80 | 0.15 | 80 | 0.65 | 1.6 | 2.5 | 2.0 | 5.2 | 1:75 | 23 | ||
| 130 | 0.15 | 100 | 0.65 | 1.2 | 2.5 | 2.0 | 4.8 | 1:45 | 21 | ||
| 150 | 0.15 | 120 | 0.65 | 0.95 | 2.5 | 2.0 | 3.5 | 1:34 | 21 | ||
| 300 | 0.15 | 240 | 0.65 | 0.50 | 2.5 | 2.0 | 2.5 | 1:20 | 19 | ||
| 600 | 0.15 | 480 | 0.65 | 0.25 | 2.5 | 2.0 | 1.0 | 1:10 | 19 | ||
| 24V | 10 | 0.10 | 8 | 0.40 | 10.0 | 2.5 | 2.0 | / | 1:217 | 27 | |
| 15 | 0.10 | 12 | 0.40 | 8.0 | 2.5 | 2.0 | / | 1:217 | 27 | ||
| 25 | 0.10 | 20 | 0.40 | 5.8 | 2.5 | 2.0 | / | 1:217 | 25 | ||
| 35 | 0.10 | 28 | 0.40 | 5.0 | 2.5 | 2.0 | 14.0 | 1:165 | 25 | ||
| 60 | 0.11 | 45 | 0.55 | 2.5 | 2.5 | 2.0 | 11.5 | 1:98 | 23 | ||
| 80 | 0.12 | 80 | 0.55 | 1.5 | 2.5 | 2.0 | 5.0 | 1:75 | 23 | ||
| 130 | 0.12 | 100 | 0.55 | 1.2 | 2.5 | 2.0 | 4.8 | 1:45 | 21 | ||
| 150 | 0.12 | 120 | 0.55 | 0.85 | 2.5 | 2.0 | 3.5 | 1:34 | 21 | ||
| 300 | 0.12 | 240 | 0.55 | 0.50 | 2.5 | 2.0 | 2.5 | 1:20 | 19 | ||
| 600 | 0.12 | 480 | 0.55 | 0.25 | 2.5 | 2.0 | 1.0 | 1:10 | 19 | ||
The rear of the motor is equipped with a dual channel Holzer effect encoder, AB dual output, single circuit per cycle pulse 12PPR, double down the road, a total output of 48CPR. Phase difference 90 degrees.
The two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor shaft. The quadrature encoder provides a resolution of 48counts per revolution of the motor shaft. To compute the counts per revolution of the gearbox output, multiply the gear ratio by 48.
Specifications:
Product type: DC Gear motor with two-channel Hall effect encoder
Rated Voltage: 12V/24V
No-Load Speed: 300RPM
No-Load Current: ≤ 0.15A
Rated Torque: 0.8kg.cm
Main Body Dimensions:66.8 x 25mm / 2.63in x 0.99in (L*D)
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off
Package Listing: 1PCS x DC Geared Motor
Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20
Each Loop Output Pulses: 12PPR 20*12=240PPR
Wiring Diagram:
- Red - Motor power terminal （+）
- Black - Motor power terminal （-）
- Green - Quad encoder Ground
- Blue - Quad encoder +5V Vcc
- Yellow - Quad encoder A signal
- White - Quad encoder B signal
1)All items will be shipped to your ebay address .Please update your latest address when you check out,and please make sure to provide us with correct,precise and detailed shipping address.
2)All items will be shipped in 1-2 business days (excluding Sat,Sun & Holiday) after payment received and cleared. For the long-time holiday, we'll post the info on our store and reply you automatically via emails.
3)If you don't receive items over 30 business days,please make sure to contact us before leaving any neutral or negative feedbacks.We'll try our best to help you solve the problem.
We accept PayPal Only！
Import duties, value added taxes and any other charges are not included, Buyers are responsible for import duties, custom fees and taxes, if any.
Please check with your country's custom office to determine the additional costs impose on the item prior to buying.
We are absolutely NOT responsible for any import tax or Customs duty.
Return is accepted within 30 days after the buyer receiving the item.
Returned item has to be in its original condition,Return shipping is to be paid by the Buyer.
