KINGBOLEN YA200 Enhanced Car obd2 Scanner Full OBDII Function For Check Engine, Read and Clear Fault Code, Mode 6, O2 Sensor Test, Battery Test, EOBD OBDII CAN Diagnostic Scan Tool for Most 1996 & Newer Cars
KINGBOLEN YA200 is a Holder code reader with complete full OBD2 Functions Read/Clear DTCs, I/M Readiness Check, Live Data Stream Viewing, Freeze Frame Data Viewing, O2 Sensor Test, On-board Monitor System Test, EVAP System Test, Vehicle Information Retrieval along with advanced DTC Lookup function.
[Key Reasons To Buy YA-200]
Lifetime Free Update (Note: UPDATE IS NOT NECESSARY before utilization. The YA-200 comes with 31.5 inch cable)
11 Kinds of Languages supported
English, French, Russian, German, Italian, Spanish, Portuguese, Polish, Japanese, Simplified Chinese, Traditional Chinese
KINGBOLEN YA200 support Complete OBD2 Function
1. Reading Codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset
Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test
Certain vehicle components can be actuated by commands sent from the scanner to test their operability
Accurate Real-time Data Flow, supports Graphical Recording and Playback
KINGBOLEN YA200 support Real-time Voltage Test
It can display the voltage of OBD diagnostic socket and the status after evaluation. It mainly feeds back the current voltage condition of the diagnostic socket or the battery condition.
* If the voltage of the battery is lower than 12V, it is recommended to go to the professional tester to diagnose the current battery condition.
I/M Readiness
Check that the vehicle's emissions system is functioning properly
One-click design makes diagnosis easier and faster
1. One-click I/M Readiness:
Just click a button to query I/M Readiness
2. One-click DTC
Looks up definitions of Pending Codes stored in the scan tool and shows the possible causes of the DTC (Not every DTC with possible causes reason).
3. One-click VIN
Displays the vehicle's identification number.
KINGBOLEN YA200 support Screenshot Function
you can take screenshots during the use of the YA200 code scanner to record the diagnosis results at any time.
Just press the up and down keys for 3s-5s to take a screenshot, which can store up to 10 pictures.
KINGBOLEN YA200 support Lifetime Free Update
KINGBOLEN YA200 OBD2 comes with Lifetime Free Update, which can be upgraded simply by connecting to a PC with a USB cable.
KINGBOLEN YA200 Code Reader meets the following protocols
1. SAE J1850 PWM (41.6 Kbaud)
2. SAE J1850 VPW (10.4 Kbaud)
3. ISO 9141-2 (5 baud init, 10.4 Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
KINGBOLEN YA200 support 10,000 + car models
American (USA) car:
Compatible with Standard OBD2 Cars from 1996 to Now:
For Chrysler, for Ford, for GM, for Jeep...
European car:
Compatible with Standard OBD2 Cars from 2003 to Now:
For Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for VW, for Ford, for Jaguar...
France Car after 2006:
for Citroen, for Fiat, for Renault, for Peugeot
Not Support for Renault Clio 2/Megane/Dacia Logan..
Asian car
Compatible with Standard OBD2 Cars from 2007 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota....
Chinese car:
Compatible with Standard OBD2 Cars from 2009 to Now:
for BYD, for Chery, for Geely, for Great Wall, for Karry...
Please note: KINGBOLEN YA200 is only for 12V 16PIN OBD2/EOBD Car engine diagnosis.
* Does not support Trucks, semi-trailers, dump trucks, tractors, hybrids, electric vehicles and other commercial vehicles.
Technical parameters of KINGBOLEN YA200
1. Display: 320 x 240 pixel display with TFT color screen.
2. Operating Temperature: -10°C to 40°C (14°F to 104°F).
3. Storage Temperature: -20°C to 70°C (-4°F to 158°F).
4. External Power: 9.0V to 16.0V power provided via vehicle battery.
5. Product Size: 137 × 79 × 22 mm (5.4"×3.1"×0.9").
Packing List of KINGBOLEN YA200
1PC * KINGBOLEN YA200 Code Reader
1PC * USB Cable
1PC * User Manual
1PC * Carton box
We accept PayPal payment.
Please contact us if you need to use another method to pay.
Payment should be made within 7 days after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
Shipping
Order will be shipped within 1 business day after payment confirmed.
We have warehouse in USA,UK,HongKong,Australia,Russian,Germany and China warehouse.
From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shipping
Delivery time varies from 2 to 6 business days.
From our Hong Kong warehouse via DHL or FedEx Ground
Delivery time varies from 3 to 5 business days.
From our China warehouse
For US buyers, we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .
For other countries' buyers, we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).
We will ship according to your PayPal address.
Please make sure it is correct and include phone number for delivery.
If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.
We are authorize distributor, our all items are 100% original and Our devices have warranty,
12 months free repair for the devices.
3 months for the accessories.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us as soon as possible and keep it unused.
We will instruct you on how to return and get refund or replacement.
If the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.