300W Portable Oxygen Hydrogen Water Welder Flame Polisher Polishing Machine 75L


Description:

• Synthetic glass (acrylic) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright. 


• The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright. 



• Take water (Distilled water and pure water) as fuel; 
• "low working voltage, cut off automatically beyond the set voltage" design; 

• Improved model from APM-H60;

• Its electrolysis adopts series and parallel compound technique.


• Economical, environmental protection, fuel obtained easily;
• The design makes the machine safer and save more energy;
• The electrolysis is more efficient.


• Heat treatment for metal parts.
• Weld the hinge of spectacles rim.
• Seal the injection glass bottle, conforming to GMP industrial standards.
• Fuse the lead or tin alloy plate for storage battery.
• Cut and fuse quartz or fine parts etc.
• Peel off FPC of computer, fuse LED
 chip and thermocouple.
• Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc.
• Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny.


• Strong and durable, light weight and portable.
• Save a lot of money and time for you.
• Economical and practical.
• Energy saving, environmental friendly, safe and reliable

• The edge polished by this machine is more smooth and shiny



Portable Oxygen Hydrogen Water Welder Flame Polisher Polishing Machine 65L

Portable Oxygen Hydrogen Water Welder Flame Polisher Polishing Machine 75L

Model SU-024
Input Voltage AC 110 or 220V
Maximum Output Gas 75L / H
Operation Gas Pressure 0.13-0.15Mpa
Ambient Temperature -10°C ∼ 40°C
Flame Temperature ≥2800°C
Water Consumption (L / H) 0.025 L / H
Flame Gun No. Single





The flame acrylic polishing machine’s instruction:
flame acrylic polishing machine instruction
Flame gun instruction:

flame gun instruction



1. Adjusting valve;  2. Connector; 3. Flame nozzle; 4. Bend flame nozzle (option); 

5. Flame gun bar; 6. Air inlet port; 
7. Pin type flame nozzle (option).

Portable Oxygen Hydrogen Water Welder Flame Polisher Polishing Machine 75L
Add water timely
After several hours of operation, the water level may fall below the “middle” line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water. 



• Synthetic Glass Industry.
The synthetic glass (acrylic) polisher works with high temperatures flames that wrought the organic handicraft article.
• Electronic Industry. IC encapsulation.
• Semiconductor.
• Nonferrous welding, braze welding.(In the application of welding the nonferrous metals, oxygen is not necessary instead it uses the oxy-hydrogen generator; it can saved more than 30% cost compared with the other method s that uses the same material and workload. 1. It can weld all kinds of chains and strings of platinum, gold, silver, copper, ect.  2. Lead and tin pole fusion accumulator. 3. Engineering precision.
• School laboratory.)
Provides a convenient and safe oxy-hydrogen flame.

 Flame Polisher Polishing Machine application

Packing list:
Machine Dimension
320mm x 220mm x 310mm (12.6" x 8.7" x 12")
Machine Weight
6kg
Package
Carton box with foam fixed
Packing Size
450mm x 280mm x 360mm 
Gross Weight
7kg

Packing List

  Machine 1 set
  Flame Gun 1 pc
  Plastic funnel 1 pc
  Flame Spray Nozzle 1 pc
  Rubber Tube 1 pc
  Power cable 1 pc
 

  Instruction 1 pc
SHIPPING

1. Shipping to worldwide.  If send by post air mail, it normally takes 15 work days to Europe and 10 work days to America.  

2. Orders will be processed within 24 to 48 hours upon cleared payment.

3. Freight time is determined by the carrier and Delivery time usually excludes weekends and holidays, particularly during holidays.

4. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you in 24 hours. 

   Our goal is best customer satisfaction!  


PAYMENTS

1. Payment should be made within 4 days after auction closed.

2. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling).

3. S&H will be determined based upon your address. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCAL TAXES OR ANY OTHER IMPORT FEES.

4. Please list your special requests in message after payment. (color, packages, etc.) 

Feedback

If you have any problems or concerns to your order or products, please message us and give us a chance to assist before you leave any feedback.

We believe that we can produce a positive outcome to any situation to earn your likes.