The Wound Closure Device is made of medical PU film, a pair of polypropylene hasps and a liner. The tape is a porous non-woven backing coated with a pressure-sensitive hypoallergenic adhesive. The main body of the device is a pair of polypropylene hasps that are designed to allow a tight closure of the wound for early healing. The ribbon is to assist application of tension between the two sides of the device.

Wound Closure Device is indicated to close acute wounds such as lacerations and surgical incisions. Wound Closure Device may also be used in conjunction with skin sutures for large wounds.

Stop bleeding, clean and disinfect the wounds. If it’s a deep wound, necessary subcutaneous suture operation can be performed according to local clinical procedures.

Clean and dry the skin and wound around and make skin of wound edges as neatly as possible

How to use Single Unit

1）Open the packaging and take out the device.

2）Take the wound closure device off the paper or PET film.

3）Stick the wound closure device on the skin wound should be perpendicular to the device and in between the hasps

4）Press the adhesive ribbons carefully.

5）According to the lengths of the wound to apply enough devices, each devices should be 2mm away from others.

6）Tighten the hasps gently.

7）Cut off the long ribbons, apply secondary dressing if possible.

8）Remove the wound closure devices lightly after recovery