1.<Universal Layout with 3 x 360°Line Lasers>
All laser lines are Green beam, independently switchable. 4 times brighter than red laser line. It’s a Universal Layout Laser Tool providing three 360-degree planes of laser light. A horizontal plane and 2 vertical planes, 90 degrees apart, provide all the level,square and plumb reference required for the floor, walls, and ceiling of the entire room. accuracy of the laser line accuracy is ± 1mm /5 m. CLASS II laser, power ≤1mW.
2. <Applicable for Floor/Wall/Ceiling tile>
Having the horizontal laser at bottom(6mm above the ground) makes floor tile work,molding layout much easier, while Most laser levels only allow you to get within 3-4" of the floor with a horizontal beam. The vertical laser line is 7mm close to the wall, easy for wall tiling. two vertical line crossed at 90 degree to get a plumb dot up and down allows you to get floor and ceiling squaring layout. projection cover ceiling, wall, floor 3D all round the room.
3. <Manual mode and various mounting options>
Slotted metal plate and magnetic wall bracket allow to be fasten to wall, wood. Fine tune base help to place the level at spots not otherwise reached by a tripod. scissor lift base works for fine tune horizontal line projection positions range from 25-80 mm,The manual mode means a fixed angle option, if you need to slope a straight line, but not level projected, you could turn off the self-leveling feature and use the levels at any angle on a tripod.
4. <Two pieces Li-ion batteries included and Remote control>
Each battery works for approx 3 hours, you can continue to work while extra one battery is charging with fast charger. two batteries is perfect to have a backup charged and ready that lasts you the full day if you need a level all day. The remote is super handy when you want to turn the level on/off without the risk of moving laser level,so user do not have to climb down & up ladder or crawl back and forth the attic during the work process.
5. <12 MONTHS QUALITY PROMISE +24 HOURS ONLINE SERVICE>
1 x 3D & 3 x 360 degree INSPIRITECH LASER LEVEL, 2 x 6000mAh Lithium batteries, 1x Remote control, 1x nail slotted metal plate, 1 x Magnetic wall bracket, 1x Fine turning Pivoting Base,1x scissor lifting fine tune base, 1 x fast charger,1 x English User manual, 1 x Luxury hard carrying case with foam cutouts inside. Please contact us if you need any help, we will reply in within 5 hours.
2.Package Include:
- 3x360° Green Beam Laser Level
- 1x DC 100-240V Charger
- 2x Rechargeable Lithium battery
- 1x Magnetic Bracket
- 1x Lifting Table
- 1x 360° Rotary Base
- 1x Remote Control
- 1x User Manual
- 1x Protective Bag
3. Specification:
◇Leveling Type: 3x360°
◇Wave Length: 532nm
◇Range: Radius 33-66ft
◇Self-Levelling Range:±3°
◇No.of Laser Lines: 12
◇Horizontally Projection Angle:360°
◇Power Supply: DC
◇Operating Temperature: 14℉-122℉
◇Laser Class: Class 2 , <1mW power output
◇Net Weight: 1.88lb
- Battery Type: Li-ion (Two Included)
- Lines Accuracy:1/25In at 16ft
- Cross Line Angle Accuracy: 90°±0.025°,±1/25in/10ft
- Tripod Thread: 1/4in
Manufacturer | INSPIRITECH |
Part Number | TDY01G |
Item Weight | 3.96 pounds |
Package Dimensions | 9.45 x 8.74 x 6.34 inches |
Batteries | 2 Lithium ion batteries required. (included) |
Material | Plastic,Rubber,Aluminum |
Power Source | Battery-powered |
Special Features | 3x360 Degree Vertical and Horizontal Laser Level |
Batteries Included? | Yes |
Batteries Required? | Yes |
Battery Cell Type | Lithium Ion |
Self-Leveling Mode
- Smart Pendulum System that allows laser tool to self-level within 3 degrees while also indicating out-of-level condition by sound-light alarms for inclines of over 3 degrees to help ensure an accurate measurement.
- When the alarm is on, the unit should be adjusted, making sure that it is placed on a level ground , then followed by the normal line emitting, which adopts the electronic induction principle.
Tilt Mode
- By pressing and holding the "OD" key for 3 seconds on either the control panel or the remote control, the self-leveling function will be deactivated and the pendulum will be locked, in this case the user can place the laser tool at any angle to project non-level straight lines without any indications.
Remote Control
- A remote control enables users to control the lines from up to ten meters away, which apparently will lessen your workloads.