Tunershop-banner

H&R-Wheelspacers

H&R Wheel Spacers
Silver Edition



Width: 2 x 5mm
PCD: 5x114,3
Centerbore: 71,5mmmm


H&R wheel spacer system DRS Silver Edition

H&R Spacers DRS 2x5mm 1065715 for CHRYSLER Voyager

H&R TRAK+ Wheel spacers System DRS improve the look as well as the handling of your car and are compatible with both stock and aftermarket wheels. Wheel spacers are an ideal complement to lowering springs or coilovers. By installing H&R spacers, the wheels fill the wheel arches properly, which significantly improves the look and the driving behavior.

Product benefits:

  • High strength, light weight aluminium/magnesium alloy
  • Precision CNC machined
  • Hard anodized for greater surface hardness and corrosion resistance
  • Fit either stock or aftermarket wheels
  • Compatible with OEM and aftermarket suspension systems
  • Engineered and manufactured in Germany
    • The H&R Spacers 2x5mm 1065715 requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with your wheels.

    All fixing-accessories are included!

  • Two Spacer (= for one axle)




    • H&R product code: 1065715



    2x5mm H&R wheelspacers for CHRYSLER Voyager 1065715


    Please note additional information and vehicle-specific technical notes!

    DRS = The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums of the existing knurl bolts with the approprirate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should the be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

    16.) Because of different studs on the rear axle for vehicles with a drum-brake you have to use the following Part. No. to order: DRS System 10 mm – 10657151 and DRS System 30 mm – 30657151.

    18.) These spacers without a double-sided centering are only useable for cars with a sufficient length of the centering to be able to center the wheels enough despite the spacer.

    Fits for:

    ManufacturerModelConstruction yearCertificate
    CHRYSLERVOYAGER / GRAND VOYAGER III (GS_ NS_)01.01.1995 --> 01.03.2001TÜV**
    CHRYSLERVOYAGER / GRAND VOYAGER III (GS_ NS_)01.01.1995 --> 01.09.2000TÜV**
    CHRYSLERVOYAGER / GRAND VOYAGER III (GS_ NS_)01.01.1996 --> 01.12.2000TÜV**
    CHRYSLERVOYAGER / GRAND VOYAGER III (GS_ NS_)01.02.1996 --> 01.12.2000TÜV**
    CHRYSLERVOYAGER / GRAND VOYAGER III (GS_ NS_)01.09.1997 --> 01.12.2000TÜV**
    CHRYSLERVOYAGER / GRAND VOYAGER III (GS_ NS_)01.10.1997 --> 01.09.2000TÜV**
    CHRYSLERVOYAGER I (AS)01.10.1987 --> 01.09.1990TÜV**
    CHRYSLERVOYAGER I (AS)01.10.1988 --> 01.09.1990FG**
    CHRYSLERVOYAGER I (AS)01.10.1989 --> 01.09.1990TÜV**
    CHRYSLERVOYAGER II (ES)01.01.1991 --> 01.09.1995TÜV**
    CHRYSLERVOYAGER II (ES)01.01.1992 --> 01.09.1995TÜV**
    CHRYSLERVOYAGER II (ES)01.08.1990 --> 01.09.1995TÜV**
    CHRYSLERVOYAGER II (ES)01.08.1990 --> 01.12.1993TÜV**
    CHRYSLERVOYAGER II (ES)01.09.1993 --> 01.12.1994TÜV**
    CHRYSLERVOYAGER II (ES)01.10.1990 --> 01.09.1995TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.02.2000 --> 01.12.2008TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.06.2004 --> 01.12.2008TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.08.2005 --> 01.12.2008TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.09.1999 --> 01.12.2000TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.09.1999 --> 01.12.2003TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.09.1999 --> 01.12.2007TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.09.2000 --> 01.12.2003TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.09.2000 --> 01.12.2008TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.09.2004 --> 01.12.2006TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.09.2006 --> 01.12.2007TÜV**
    CHRYSLERVOYAGER IV (RG RS)01.10.2000 --> 01.09.2002TÜV**

    TÜV**: Application based on TUV certificate.
    ABE**: Application based on general operating license issued by german KBA.
    FG**: Application based on max load testing report.



    H&R | Wheel Spacers

    H&R TRAK+ Wheel Spacers improve the look as well as the handling of your car while being compatible with both the stock and aftermarket wheels.

    Product Benefits:

  • high strength, light weight aluminium/ magnesium alloy
  • Precision CNC machined
  • Hard anodized for greater surface hardness and corrosion resistance
  • Available in silver and black (depending on application)
  • Fit either stock or aftermarket wheels
  • Compatible with OEM and aftermarket suspension systems
  • Available for a wide range of automobiles
  • Includes detailed mounting instructions for quick and easy installation
  • Delivered with TUV or ABE approval
  • Engineered, manufactured and tested in Germany