T&S Engineering
!Repair kit including installation instructions!
for
Bosch fuel distributor (fuel distributor)
The repair kit is for 6 cylinder cast iron flow dividers with an adjustable upper housing part.
Flow divider number: 0438100123
Please compare the number of your flow divider
(found on a tag on the black cast iron body)
with the number listed here.
To seal the metal membrane on the housing, the upper and lower parts are additionally Hylomar M needed. You can find it in our shop under the article number: 383239527529
We offer the individual repair kit for each fuel distributor , as these were also manufactured with different sealing membranes.
Search by vehicle list:
AUDI 5000 2.2 Turbo quattro [44] (CDN,USA) 121KW/ 165HP 2.2l 01.1985 - 07.1985
AUDI Quattro 2.2 Turbo [85, B2] 120KW/ 163PS 2.2l 03.1982 - 07.1989
MADE IN GERMANY.
|
The installation instructions will be sent to the email address stored on Ebay after purchase.
The installation instructions will be sent to the e-mail address stored on Ebay after purchase.
All sealing rings made of FKM / Viton.
Only parts from German production.
All sealing rings that are necessary for the repair are included in the set incl. 2 stainless steel washers to adjust the pressure regulator.
The sealing membrane is made with a tolerance of 0.01mm. manufactured.
In our shop you will also find accessories suitable for your fuel distributor .
All O-rings are packaged in the appropriate bags to fit the fuel distributor , so there is no need to look for the right O-ring! Since some of the O-rings only differ in size very slightly, if the wrong size is used, the O-ring could shear off and lead to the failure of the flow divider after a short time. You are also welcome to send the fuel distributor to us after the repair so that we can check and adjust it.
MADE IN GERMANY.
The repair kit is for 6 cylinder cast iron flow dividers with an adjustable upper housing part. To seal the metal membrane on the housing, the upper and lower parts are additionally Hylomar M needed. We offer the individual repair kit for each fuel distributor , as these were also manufactured with different sealing membranes. All sealing rings that are necessary for the repair are included in the set incl. 2 stainless steel washers to adjust the pressure regulator. All O-rings are packaged in the appropriate bags to fit the fuel distributor , so there is no need to look for the right O-ring! Since some of the O-rings only differ in size very slightly, if the wrong size is used, the O-ring could shear off and lead to the failure of the flow divider after a short time. You are also welcome