Mouthpiece Protectors 8pack
Unbranded mouthpiece guards. Slip these guards on the end of your mouth piece to protect your teeth and your bagpipe mouthpiece.
Also Available from our Bagpipe Accessories Store
Pipers Choice 2 pack Mouthpiece Protectors
Mouthpiece guards. Slip these guards
on the end of your mouth piece to protect your teeth and your bagpipe
mouthpiece. Pack of 2.
McCallum Bagpipe Mouthpiece
Bagpipe Mouthpieces Different size mouthpieces
are available for the bagpipe. This way you can alter the length of the
blowpipe on your pipes without having to buy a new blowpipe. .
These mouthpieces are made of Delrin,
so they are strong and will last a long time. They will fit on most blowpipes.
4 sizes in total are available 3", 4", 5", 6". A proper
fitting blowpipe will help with your posture when playing your bagpipe.
Plastic Bagpipe Moutpiece by
RG Hardie
Made from Delrin this mouthpiece is
available in sizes 3.5in, 4.5in and 5.5in
It is suitable for most ranges of bagpipes and plastic blowpipes using a 30TPI
thread.
Also option to add mouthpiece protectors 2 pack and save
Valved Mouthpiece
Made by Ayrshire Bagpipe Company.
Bagpipe mouthpiece in two parts. Screws together with valve in the middle.
Large 8 mm bore.
Made of black polypenco.
5 ½” (140mm) long
Oval Mouthpiece
Made by Ayrshire Bagpipe Company
Extra large bore 7/16" - oval end. Made from polypenco. Standard screw
fitting 9/16” x 30tpi thread.
Bent Curved Mouthpiece
Made by Ayrshire Bagpipe Company.
Bagpipe mouthpiece. Made of polypenco.
Bent to approximately 40-45 degrees
to give less pressure on the teeth. Fits any standard blowpipe 9/16" x 30
tpi thread. 5 1/2" long. 8mm bore.
Pipers Choice Oval
Airstream Mouthpiece
Oval Mouthpiece from Piper Choice.
Available in 3.5", 4.5" and 5.5" lengths.
Mouthpiece has standard size thread
which will fit most wide bore blowpipes.
Wide Bore Blowpipes also available in
our eBay Store
Mouthpiece Protectors
Unbranded mouthpiece guards. Slip
these guards on the end of your mouth piece to protect your teeth and your
bagpipe mouthpiece.
BLOWPIPE
EXTENDER BY PIPERS CHOICE
Blowpipe Extender – Often when
changing your bag, or when a young piper grows, the need for a longer blowpipe
exists. This extender is designed to add 7/8″ to
your blowpipe. Combed and beaded, the design will fit with your
current blowpipe and save you the cost of purchasing a whole new blowpipe or
mouthpiece. Two can be connected for extra length. Designed to
fit standard blowpipes and mouthpieces.
REED PAK BY
PIPERS CHOICE
The Reed Pak is a great little item
for the Piper. It is a small container that store fit 5 pipe chanter reeds. The
package is small and will fit in a shirt pocket, or sporran. (Reeds not
included)
Premium Reed Protector
Made by Ayrshire Bagpipe Company.
Premium Reed Protector made of soft
wood for moisture control.
Soft wood prevents mould growing on the reed as it dries out.
Polypenco ferrule. The screw is
tapped into the ferrule for more durability
G1 Drone Reed Protectors
Protect your bagpipe drone reeds with
the NEW G1 Drone Reed Protectors.
G1 Reed Protecting Chanter Cap
Fit over your chanter reed and attach
to the chanter to keep your reed safe.
Moose Camlock Chanter Stock
The Moose Camlock Blank Chanter Stock
is designed to fit almost every chanter size.
It fits easily over the chanter reed
and simply turns to tighten over the hemp.
The Moose Camlock allows the chanter
to be stored safely in a tube without any unsightly protruding screws that can
also damage the hemp joint.
There is no requirement for a hole in
the top as the off-set cam allows any excess moisture to escape.
RG Hardie Bagpipe Chanter Reed Protector
Reed Protector also known as a false
stock allows the chanter reed to dry whilst storing an instrument between use
helping prevent mildew and prolonging reed life.
RG Hardie Pipe Chanter Split Stock
The R.G. Hardie plastic pipe chanter
split stock set allows the chanter to be removed without damaging the reed.
This is an excellent product for
beginners or young pipers who have a tendency to chip the corner off the reed
when removing the chanter from the stock. It will help save money on reeds
which are becoming increasingly more expensive.
The set allows the piper to use 2
chanters in the same bag and comes complete with:
1 Stock Body
2 Reed Covers
2 Reed protectors
Superb combing and beading finish and
available in a range of ferrules to match your bagpipes.
RG Hardie Practice Chanter Reed Protector
This reed protector is for blackwood
chanters due to a common problem where the top cracks. It is very important to
break down the chanter and allow the hemp to dry out. If this is not done it
can cause the top to crack.
This reed protector features extra
holes at the top allowing the reed to be safely stored in a pipe case while the
chanter dries out after playing.
McCallum Bagpipe Chanter
Reed Protector
Reed Protector also known as a false
stock allows the chanter reed to dry whilst storing an instrument between use
helping prevent mildew and prolonging reed life.
James Robertson Pipe Bag Seasoning
The ingredients used in the seasoning will feed and preserve the skin of
a Traditional Pipe Bag and help to absorb moisture and keep the bag airtight.
To ensure a pipe bag is airtight, cork the stocks and inflate the bag through
the blowstick as usual. The bag should stay inflated fully for at least a
minute if it is sufficiently airtight. If it doesn’t then you require to
season your Traditional Pipe Bag.
Airtight Seasoning
Airtight Seasoning 250ml
Airtight Seasoning feeds and
preserves leather pipe bags, absorbs moisture providing a rich resonant tone to
the instrument. It guarantees to make any leather bag airtight, used by the top
pipers and pipe bands in the world. The Choice of Champions!!
Bagpipe Metal Polish and Sealant
by R.G. Hardie & Co
New R.G. Hardie & Co. Bagpipe Metal Polish and Sealant
It can be used on all types of bagpipe metal mounts including silver, nickel,
antique nickel, brass and alloys.
Gives a lustrous shine and provides ongoing protection against atmospheric
corrosion - but, unlike many metal polishes, it is non-abrasive and does not damage
the metal or the wood.
It is available in 50ml bottles - only the smallest amount is required for
perfect results.
We recommend the use of a fine microfiber cloth for application and
final polishing.
Pull Through by Pipers Choice
The Pull Through is used to add Bore
Oil to the bores of the bagpipes of simply for cleaning the bores from any
build up.
Apply a small amount of the bore oil
to the cloth and then drop the metal weight down each bore and pull it through.
Pull Thru by Lyons Bagpipes
The Pull Through is used to add Bore
Oil to the bores of the bagpipes of simply for cleaning the bores from any
build up.
Apply a small amount of the bore oil
to the cloth and then drop the metal weight down each bore and pull it through.
Blackwood Wood Oil for wooden set of Bagpipes
The Piper Range Blackwood Wood Oil. An essential, top quality,
wood treatment to preserve and protect bagpipes. Helps prevent cracking,
warping and damage caused by moisture and temperature.
We cannot recommend this product enough or over stress the importance of
regular oiling and cleaning of pipe bores.
A well maintained pipe will last for decades The Pipers Range bore oil is the
purest and finest available
Bore Oil by Pipers Choice
Pipers Choice bore oil
This Bagpipe Bore Oil has a special preservative in it that helps to prevent
cracking and warping of the bagpipe due to excessive dryness or over-absorption
of moisture. The Bore Oil comes in a 1.25 oz. bottle and should be used
occasionally to keep the internal bores of your wood bagpipes in good
condition. This can also will enhance drone tone due to smoother bores. This
oil can be applied with with cotton drone and chanter brushes, or a pull
through swab for the stocks.
MACCLENS
DISINFECTANT
SPRAY
BOTTLE BY PIPERS CHOICE
3.38 OZ
SPRAY BOTTLE
MacClens Disinfectant – This spray
bottle of MacClens disinfectant is great for spraying off the mouthpiece of
your bagpipe or practice chanter. This is a great product to use especially
after you are getting over a cold of flu, or after somebody has borrowed your
pipes. This is a safe reliable, lab tested, and environmentally friendly
product. This comes in an 100ml spray bottle and can be re-filled with the
larger 8 oz bottle of MacClens.
Black Waxed Hemp 50g
by Pipers Choice
Black Waxed Hemp 50g. Ideal for
forming seals around all joints on the pipes and especially on tuning slide.
PIPERS
CHOICE HEMP – UNWAXED YELLOW 2OZ
Plain Yellow Hemp – Bagpipe Hemp
is a staple for every piper. Hemp is used on your bagpipes, and most practice
chanters. It seems like you are always having to adjust a part of your pipes,
and a roll of hemp is a must in every pipers case. Having your pipes hemped-up
properly is one of the most important maintenance aspects on your bagpipe. It will
help with proper tuning, and air efficiency. Plain Yellow hemp is the most
popular and most diverse for using on your bagpipe.
PIPERS
CHOICE HEMP – WAXED YELLOW 2OZ
Yellow Waxed Hemp – Yellow waxed hemp
is used as a replacement to, or in combination with plain yellow hemp. The
Yellow waxed hemp is the same material as plain yellow hemp, however it is
pre-coated with wax, so there is no need for applying beeswax to the hemp to
strengthen it. Having your pipes hemped-up properly is one of the most important
maintenance aspects on your bagpipe. It will help with proper tuning, and air
efficiency.
Bees Wax
This bar of beeswax is for use with
natural hemps. The addition of wax ensures the hemp will grip the wood or
plastic in an effective manner, ensuring the hemping doesn't turn inside the
stock.
Pipers’ Choice Bagpipe Cobbler's Wax
with Leather Strip
Cobbler’s Wax. Complete with a piece
of leather to use as a hand grip.
This cobblers wax is specially
formulated to apply black wax to the first bit of hemp for extra sticking
power.
It is used when starting to hemp a
joint on the set of pipes, and helps to prevent the hemp from spinning.
This wax is also formulated so that
it will not melt in your pipe case as has been the custom in the past with some
waxes.
Bagpipe Drone Corks
3 Drone Corks. A simple and very
useful way of temporarily stopping drones without the need for reed
manipulation. Great for tuning, warming up and an essential part of a pipers
kit.
Bagpipe Stock Corks
Set of 4 or 5 Stock Corks. Essential
maintenance item allowing a piper to block the stocks to check the bag is
airtight. They are also necessary for seasoning a leather pipe bag.
Can be ordered in sets of 4 or 5's.
DRONE TOP
STOPPERS BY PIPERS CHOICE
Bagpipe Drone Top Stoppers are an
essential part of your pipe box maintenance kit. They are used to shut either
one or all of your drones off.
This can be when you are breaking
in a new reed, getting back into playing shape, or making your set of bagpipes
into a practice goose.
These drone top |
These drone top
stoppers are made of Rubber so they will not wear out or break down.
STOCK
STOPPERS BY PIPERS CHOICE
Bagpipe Stock Stoppers are an
essential part of your pipe box maintenance kit. They are uses when either
seasoning a pipe bag, checking for air tightness or turning your pipe bag into
a practice goose. These stock stoppers are made of Rubber so they will not wear
out or break down. Each package contains 5 stoppers.
Silicone Blowpipe Valves 3pk
Made by Ayrshire Bagpipe Company
Blowpipe valves - made from
non-perishable silicone rubber and copper staple.
Sold in packets of 3
Little Mac Valve
by Pipers Choice
Little Mac Non Return Valve for the
Highland Bagpipe
Keeping the bag full and providing a constant pressure for steady blowing is
hard enough when playing your bagpipe, so you don't need the added worry and
aggravation of a wasteful air leak through your mouthpiece. This can be 100 per
cent eliminated when you use the "Little Mac" Valve. You will benefit
in the following ways; does not restrict blowing; an instant airtight seal;
little or no maintenance; will not dry or wear out; top quality and durability.
Moose Valve
The Moose Valve is the Worlds first
bagpipe non restrictive valve suitable for every bagpipe set up since the
original flap valve. The Moose Valve offers 100% confidence for every piper
combined with non restrictive air flow and an efficient water trap.
The Moose valve is the latest precision engineered product to replace all
existing blowpipe and stock bagpipe valves and here are 10 good reasons why
every piper should use a Moose Valve.
Made by Tonemaster
Set of 3 high performance drone valves. To fit in the bottom of stocks.
Preset for use. Complete with
instructions. Only really of use with zipper bags
Hylands In-Line Drone Valves
Hylands In-Line Drone Valves have
specifically been designed and developed to assist pipers in striking in and
cutting off their bagpipe drones cleanly and efficiently.
The valves fit quickly and easily
into the tubes of some moisture control systems and are simply adjusted using
an allen key provided.
Hylands In-Line Drone Valves have
received rave reviews from pipers all over the World and continue to be a
success with pipers from beginners right through to grade 1 pipers and top solo
players.
Pipers Choice Rubber Blowpipe
Valve with Tie-in string
This rubber valve requires no
modification to your existing blowpipe. It is a device that by design stays
closed giving a complete seal with no drying out. Although these valves have a
long life, it is good to replace them every once in a while.
Supplied with Tie-in String.
Rubber Blowpipe Valve
The classic "clack" Valve.
A proper seal on the blowpipe is a great help in creating a stable tone and
frees a piper to concentrate on fingering rather than blowing.
SMALLPIPE
VALVE BY PIPERS CHOICE
(PLEASE NOTE
-ONE VALVE PER PURCHASE)
The Smallpipe valve is made to fit most styles of
smallpipes. These can be used on Kitchen Pipes, Shuttle Pipes, Small Pipes,
Parlor Pipes and many other makes.
This rubber valve requires no modification to your
existing blowpipe. It is a device that by design stays closed giving a complete
seal with no drying out. Although these valves have a long life, it is good to
replace them every once in a while.
Highland Reeds Yellow Drone
Valves
The tension on the quick stop drone
valve is screw adjustable giving greater accuracy and once properly installed
to suit your blowing strength the Quick Stop Drone Valves should ensure that
you strike your bagpipes in without difficulty, provide a steady flow of air to
your drone reeds and close tightly when pressure is released to ensure a clean
'cut-off'.
GOOSE ADAPTER BY
PIPERS CHOICE
Bagpipe Goose Adapter –
This adapter fits into the chanter stock to adapt a
piper’s present regular-sized or large-sized practice chanter bottom to the
bagpipe, to give an inexpensive goose, after corking the drones or stocks. This
allows the piper to practice at length without becoming winded, or young
players to practice blowing before moving on to a regular bagpipe chanter and
reed. This is the type of product that every piper can use.
GOOSE ADAPTER WITH AIRFLOW
VALVE
BY PIPERS CHOICE
Goose Adapter with Airflow Valve – This new feature
on the goose adapter aids the beginning player in controlling their airflow
when using the practice goose. Using the valve will allow the player to
increase or decrease the amount of air to the practice chanter to assist in
more steady blowing.
This product also allows for the drones to be
played along with the practice chanter. Product accommodates most makes of
practice chanter.
“BIG MAC” VALVE BY PIPERS
CHOICE
The "Big Mac" Valve - The big brother to the "Little
Mac." This valve serves multiple functions as a one-way valve, water trap
and air redirect. The Big Mac inserts into the bottom of the blowpipe stock
(via zippered bag) and features an Airstream valve that is protected internally
and is easily accessed for cleaning. The section inside the stock allows for
moisture to collect to be dumped later. Last, the right angle redirect forces
air away from the pipe chanter reed delaying the time it takes for moisture to
saturate the reed. A tube can be added to this product for further water
retention and air direct.
Piper Third Hand by Pipers Choice
Piper's third hand tuning aid
This product helps with tuning by
covering the holes of the bottom hand to sound low A.
Just tune your drones and remove it again to start to play.
Thumb Stop
Thumb Stop - The thumb is a must for every beginning piper. It is used
to train the thumb on your right hand to stay directly behind the middle
finger.
This will help you have the proper finger placement allowing you to play
burls, taorluaths, and grace notes properly. As well as being good for a
beginner, they are great for an existing player who wants to work on their
technique.
Black PVC tape
Ideal for taping chanters
Polyester High Temperature Tape
High Temperature Polyester Tape for
use on pipe chanters and practice chanters for tuning
Polyester Tape is Easily Removed after Use.
Silicone Based Adhesive Leaves No Residue after Removal.
Comes in rolls 10mm wide by 33m Long. Perfect for tuning between the holes.
Rise is minimal ,so less noticeable to the touch.
Premium Pipe Chanter Tape
Regularly changing chanter tape will
keep the chanter ready for quick and accurate tuning which is essential for
achieving the best possible sound.
This premium tape sticks to the chanter, holding it's position well without
leaving a residue. The thickness and width of the tape ensure it doesn't
interfere with fingerwork.
Bagpipe Tunetape by Blair
Tunetape chanter tape is purpose made for fine tuning notes on the pipe
chanter. It offers minimal slippage with the correct amount of flexibility for
accurate tuning. Tunetape is an agressive pressure sensitive tape.
PTFE Tape
In order to tune your drones, the upper
section of the drone must slide up and down (usually twisting at the same time)
on the tuning pins using one hand.
This inexpensive PTFE tape is
slippery and thin enough to apply over hemp to provide an airtight seal on
joints and reduce friction thus allowing easier turning on the tuning pins.
Deburring tool
The Pipe Chanter Deburring Tool is an
ideal tool to sharpen notes on the pipe chanter. We advise undercutting the top
of the holes only rather than changing the shape of the hole.
Modifications made using this tool is done so at the owners risk.
Hobby Knife
The Hobby Knife is a very handy tool
to have in the pipe case.
It can be used for everyday cutting jobs like hemp and tape but due to its
razor sharp pointed blade it is ideal for undercutting chanter holes.
TIE-IN KIT BY PIPERS
CHOICE
The Tie-in Cord KIT comes with 30 yards of strong
waxed nylon tie-in cord, tie-in instructions, and 2 bits of leather for making
welts for your chanter stock. There is enough cord here to tie in one pipe bag
with all 5 stocks
Pipers Choice Reed Block
The Reed block from Pipers’ Choice is a great
little item for easing reeds. Although it looks like a simple little device,
there is a lot of though that goes into making these. By carefully placing the
tips of the pipe chanter reed in the slot on the Reed block and leaving it sit
overnight. You can ease the strength of the pipe chanter reed by closing the
blades in a bit. It is important not to interfere with the staple on the reed
while doing this. Each block comes with light sandpaper attached to it for
small adjustment.
***please note that reeds pictured are not included.
PIPERS
CHOICE DRONE REED
EXTENDERS
Drone Reed Extenders (pack of 3) –
This product allows drones to lower on the tuning pin. This will help you
attain better control and better overall sound.
The extenders go into the reed seat
and are easily installed. Please note, these are not useful on every set of
pipes.
Most pipes tune properly, and there
are not necessary, but if your drones constantly tune too high on the tuning
pins,
then this is a product to solve that
situation and give you the sound and control you are looking for.
Chanter Reed Bridles 12pk
by Pipers Choice
These are essential for reed
manipulation, they should be placed on the reed turning the elastic twice to
ease the reed while maintaining stability.
5PK Bagpipe Cleaning Brushes by
Lyons Bagpipes
This
Brush Set contains 5 specially designed bagpipe cleaning brushes.
Each brush is designed to fit a
certain bore or bores of the bagpipes.
3 medium bristle brushes for cleaning
the bagpipes and 2 soft cotton brushes for drying and/or applying Bore Oil.
Cotton Bagpipe Brushes
Set of 4. Essential maintenance
items. Regular cleaning of pipe bores will preserve both tone and the wood of
any pipe.
Nylon Bagpipe Brushes
Set of 4. Essential maintenance
items. Regular cleaning of pipe bores will preserve both tone and the wood of
any pipe.
2PK Practice Chanter Soft Brushes
by Lyons Bagpipes
This set of 2 soft cotton brushes are specially designed for the
practice chanter.
Soft brushes are used for wiping the inside bores. They can be used to
wipe away condensation or clean away any build up.
They can also be used to apply Bore Oil to a blackwood practice chanter.
Nylon Brushes - set of 4
from RG Hardie
Nylon Brushes- Set of 4. Essential
maintenance items. Regular cleaning of pipe bores will preserve both tone and
the wood of any pipe.
Deluxe Brushes - Set of 2 by RG
Hardie.
The latest addition to range of
essential bagpipe maintenance items. Microfiber brushes that absorb moisture
and also clean the inside of the drones and blowpipe. Regular cleaning of
bagpipe bores will prevent the wood and hemp from expanding and contracting
which can lead to splitting the wood.
Cloth Brushes - Set of 4 by RG Hardie
This set of cloth bagpipe brushes are
an essential maintenance product for keeping the bores and blowpipe dry and
clean. Drone reeds performance and stability will be affected by a build up of
moisture therefore it is essential to dry the drones after practice sessions,
competitions and parades.
Regular cleaning of bagpipe bores
will improve the performance and longevity of the bagpipes.
Pipe Chanter Soft Brush
by Lyons Bagpipes
This conical, soft cotton brush is
specially designed for the bagpipe pipe chanter.
Soft brushes are used for wiping the
inside bores of the bagpipes. This brush can be used to wipe away condensation
or clean away any build up.
It can also be used to apply Bore Oil.
This soft chanter brush can also be stored away inside the pipe chanter to
prevent any build up of dust.
Reed Absorbs 12pk by Pipers
Choice
Reed Absorbs - absorb moisture or
saliva that collects at the bottom of the reed in your practice
chanter. Reed Absorbs - absorb moisture or saliva that collects at the
bottom of the reed in your practice chanter. Can be used in practice chanters
and pipes with polypenco stocks where moisture is a problem. Packs of 12
Absorbent disks per package. Most people will notice that on hemped part of the
practice chanter, that there is usually a buildup of moisture after playing.
This will help collect a large part of that moisture.
Drone Reed Bridles 3 Pack
Set of 3. These orange bridles are
excellent for cane drone reeds. Over time the original bridle can come loose
causing the reed to become unstable, at this time replace the bridle with the
orange bridle to improve the reed stability.
McCallum Practice Chanter Cases
Available in the standard case which will fit your practice chanter and
reeds or larger version in which you can fit a tutor book (college of piping
size)or some sheet music. Both cases will also neatly fit into your pipe case
and keep things organised.
McCallum 26"Practice Chanter Case
The 26" Long Case to fit
practice chanter without breaking it down. Cases will also neatly fit into your
pipe case and keep things organised.
McCallum Maintenance Kit Bag
Ideal to hold all your maintenance items e.g. Hemps, Bees wax etc.
Measures 31cm height by 13 cm width. Has a handle on back,
so it can be hanged up.
Deluxe Accessories Kit Bag
by RG Hardie
Kit bag to hold all you piping
accessories.
**accessories pictured not included
Looking for a full accessories kit-then let us know which items you would like
and we will get you a total discounted price when purchased with the kit bag.
R G Hardie
Deluxe Practice
Chanter Case
The R.G. Hardie practice chanter bag
provides excellent protection for storing a standard or long sized
practice
chanter along with an A4 book. A
build up of moisture in the hemp joint of a practice chanter can cause
blackwood tops to fracture. The case
requires the chanter to be broken down for storage which helps dry
out the chanter after every practice
session.
Case features include:
Grab handle
A4 book pocket
Accessories zip pocket
Reed bottle storage pocket
Protective covers for the practice chanter top and bottom
Velcro fasteners for the top and bottom
*PLEASE NOTE THE CASE CONTENTS SHOWN IN THE PICTURES ARE NOT INCLUDED*
he R.G. Hardie practice chanter |
R
G Hardie Deluxe Pipe Chanter Case
The R.G. Hardie deluxe pipe chanter case provides
protection for storing a pipe chanter which is essential for blackwood pipe chanters.
Features include a padded interior, two elastic straps to hold the chanter in
position and button closures.
Please note this case will not accept a chanter with a sole.
Full Set Up Mooseture
Control System by Moose
After several years of research and
developement Moose Bagpipes have released their Mooseture Control System.
The Mooseture Control System gives
pipers options for most moisture control solutions and has been designed to
suit almost every conceivable set up.
The system can be purchased as a complete set up or just in part.
The Moose Drone Canister has 3 equal divisions ensuring absolutely equal and
airtight airflow to each drone reed. The drone sections are filled with
desiccant to offer totally dry airflow to the drone reeds.
The Moose Chanter/Blowpipe Canister can be connected to either the chanter
stock, as a canister, or the blowpipe stock as a tube trap.
Both options offer a variety of choices in which way the piper wishes to run
their bagpipe set-up. The canister has a dial to allow moist air from the bag
to enter direct to the chanter reed as well as going through the desiccant in
the canister. The dial can be moved easily from the outside of the bag to
either shut off moisture or open up for more moisture. The canister has a small
filter to protect the chanter reed from any dust particals. The amount of
desiccant in this canister can be altered to suit as required or the desiccant
can be replaced with a chamois (not supplied) if using as a tube trap from the
blowpipe stock.
Both Moose Canisters can be easily removed at the tubes and have an easy
removable lid for access. As the canisters are small and round in shape there
is no need to ensure that they are level inside the pipe bag.
Highland reeds bottle water trap
Standard water trap for synthetic zip
bag.
Moose Tube Single
Moose Tubes are tubes for connection
to the Mooseture Control System or other suitable moisture control sytems.
A Moose Tube takes seconds to fit
and/or replace without any need to remove a stock from the bag!
It is incredibly easy to fit and replace by simply screwing securely into
position in the bottom of each stock. The secure fitting is very similar to
that used on the very popular Moose Valve.
Moose Tube features a large bore for efficient air delivery and are 100%
Airtight when fitted.
Moose Tubes 4 pack with
Connectors Set
Moose Tubes are tubes for connection
to suitable moisture control sytems.
Moose Tubes take seconds to fit
and/or replace without any need to remove a stock from the bag!
They are incredibly easy to fit and replace by simply screwing securely into
position in the bottom of each stock. The secure fitting is very similar to
that used on the very popular Moose Valve.
Moose Tubes feature a large bore for efficient air delivery and are 100%
Airtight when fitted.
Moose Tubes come complete with Moose Connector.
Mooseture Control System
Chanter/Blowpipe Canister
by Moose
The Moose Chanter/Blowpipe Canister
can be connected to either the chanter stock, as a canister, or the blowpipe
stock as a tube trap.
Both options offer a variety of choices in which way the piper wishes to run their
bagpipe set-up. The canister has a dial to allow moist air from the bag to
enter direct to the chanter reed as well as going through the desiccant in the
canister. The dial can be moved easily from the outside of the bag to either
shut off moisture or open up for more moisture. The canister has a small filter
to protect the chanter reed from any dust particals. The amount of desiccant in
this canister can be altered to suit as required or the desiccant can be
replaced with a chamois (not supplied) if using as a tube trap from the
blowpipe stock.
Sharp Bagpipe Water Trap
Small Water Trap that fits on bottom
of stock.
TIZIP Zipper Bag Lubricant
Does what it says on the tube in this
case
For use with Canmore ,Bannatyne
,Moose bags as well as others.
Trap Dri moisture control trap
by G1 Reeds
The Trap Dri moisture control trap
has been developed to prevent excess water escaping from your water trap and
saturating your pipe bag by capturing and retaining moisture in the tube to be
emptied. A revolution in moisture control.
The Trap Dri unit is fitted to your existing water trap tube and does not
require a zip bag as it can slip through almost any split stock.
(Currently supports the standard tube with external diameter of appx 20 – 23mm
used by majority of pipers or tube with internal diameter of 19mm, we will
adapt this to fit any tube size or system soon, Full bottle trap set up’s
available in shop for synthetic zip bags now).
With Trap Dri installed you will obtain a vastly reduced level of moisture into
your bag.
Designed to be so unrestrictive to airflow you won’t even know it’s there and
enhance your playing experience.
The trap works by collecting water which condenses inside your water trap tube
and locks it inside the Trap Dri. Using a unique combination of air pressure
and water flow to draw the water into the Trap Dri unit the water then becomes
trapped and can’t make its way to the end of your tube where it can escape
through the holes, resulting in better bagpipe performance.
Using Trap Dri will prolong the life of your sheepskin or other animal skin bag
by drastically reducing the amount of water your bag has to absorb.
Using the Trap Dri in a synthetic bag by adapting it to fit your current system
will greatly enhance the effectiveness of any existing moisture control by
locking water away and preventing it running up the tube and soaking your
moisture control system.
In either animal skin or synthetic bag you will obtain a steady balance of
moisture meaning your pipes will remain in tune longer and can be played longer
than before. “Spend your time practicing tunes, not tuning”.
The Trap Dri is virtually maintenance free. Simply remove every few weeks to
clean.
Give your pipes the treatment they deserve by installing this revolutionary new
trap which never loses its effectiveness during use.
Highland Reeds Moisture Control System
Moisture Control System (MCSIII) reduces moisture before it hits your
drone reeds. The Moisture Control System has been designed and developed with
you, the piper, in mind. This is the most versatile system on the market
because it is:
Lightweight
Sits at the top of the bag
Easy to adjust
Equipped with removable drone valves
It also offers the following benefits:
Keeps reeds drier so that your pipes stay in tune and you can play longer
No tonal change
Consistency of air pressure to drone
Easy to install, remove and maintain
Non-bulky, lightweight system
The removable drone valve has a flexible connector for connection to the drone
stock. It also features a screw adjustable quick stop drone valve to regulate
the air flow.
Drone valves are included within the system. These are removable if not needed,
however they will regulate the air flow to the drones giving a steadier drone
sound.
Highland Reeds Moisture Control System
for Pipe Chanter
The Chanter Moisture Control System (CMCS) has been designed to reduce
moisture from your pipe bag before it gets to your chanter reed. Air is taken
through the gel filled cartridge section, on through the flexi-tube and
connects to the chanter stock.
The Chanter Moisture Control System complements Highland Reed’s Drone
Moisture Control System and offers the following benefits:
Keeps chanter reed drier so you can play longer
Gives consistency of air flow to the chanter
Non-bulky, lightweight system
Lies on the bottom of the bag
Easy to install, remove and maintain
Highland Reeds Moisture Control System
Spare Set of 3 Yellow Cannister
These allow you to switch over a set in use to a dry set.
Valves and Rubber Cups not included.
Highland Reeds Moisture Tube
Fitting your bagpipe with a water trap is absolutely essential to reduce
the amount of moisture getting to your reeds. It also reflexes your hot, moist
breath to the back of the bag and away from your reeds. The Moisture Tube has
been specifically designed as an effective, lightweight, moisture control
system that works without the use of silica gels.
It is made up of a lightweight flexible tube connected to a compression
cartridge. Warm, mouth-blown air flows through the tube and when passing
through the cartridge it is compressed, causing the warm air to cool and
humidify within the cylinder. The cartridge is fitted with a breathable cloth
which can help with the air compression and to absorb excess moisture. The
system is very easy to remove and fit. It is easily dismantled allowing for
speedy and efficient cleaning.
This new product allows for adjustments to how much restriction you want
or need.
***please note blowpipe and stock pictured for illustration purpose only
and not included in purchase***
Highland Reeds Moisture Control System
Moisture Control System (MCSII) reduces moisture before it hits your
drone reeds. The Moisture Control System has been designed and developed with
you, the piper, in mind. This is the most versatile system on the market
because it is:
Lightweight
Sits at the top of the bag
Easy to adjust
Equipped with removable drone valves
It also offers the following benefits:
Keeps reeds drier so that your pipes stay in tune and you can play longer
No tonal change
Consistency of air pressure to drone
Easy to install, remove and maintain
Non-bulky, lightweight system
The removable drone valve has a flexible connector for connection to the drone
stock. It also features a screw adjustable quick stop drone valve to regulate
the air flow.
Drone valves are included within the system. These are removable if not needed,
however they will regulate the air flow to the drones giving a steadier drone
sound.
Highland Reeds Spare Rubber Cups
Spare set of 3 rubber cups.
Highland Reeds Spare Gel for Cartridges
Spare Gel to switch over for cartridges.