Features:
- To ensure quality, speed and stability, components for TI are adopted for its power supply and high-speed interactive core
- Using original 35T chip for AMD
- Independent first-class production line
- Raw materials are almost all imported
- DMA test speed reaches to 10000s
- Thickened gold finger increases the conductivity of the contact point with the card slot, reducing failure such as sudden disconnection
- Can be used with PCI-E x4/x8/x16
- Fast USB 3.0
- PCIE X1, X4 and X16
- Original processor for AMD
- On-board JTAG
- OPEN OCD remote burning
Specifications:
- Model: NEW 35T-3
- Data interface: TYPE-C FT601Q
- Programming interface: TYPE-C FT4232HQ
- Working environment: -40C° to 100C°
- Channel type: PCIE X1, X4 and X16
- Expansion Channel: M.2 hard disk enclosure and graphics card dock for Thunderbolt 3 and 4
- Engineering debugging: JTAG 6-wire
- Data transfer: USB3.0/5000-6300 TYPE-C 3.2GEN2X2 8000-9500
- Supported firmware: For Lurker, Silver Shield, Atomic, Squirrel 10 people, independent firmware and universal firmware
- To ensure quality, speed and stability, components for TI are adopted for its power supply and high-speed interactive core
- Using original 35T chip for AMD
- Independent first-class production line
- Raw materials are almost all imported
- DMA test speed reaches to 10000s
- Thickened gold finger increases the conductivity of the contact point with the card slot, reducing failure such as sudden disconnection
- Can be used with PCI-E x4/x8/x16
- Fast USB 3.0
- PCIE X1, X4 and X16
- Original processor for AMD
- On-board JTAG
- OPEN OCD remote burning
Specifications:
- Model: NEW 35T-3
- Data interface: TYPE-C FT601Q
- Programming interface: TYPE-C FT4232HQ
- Working environment: -40C° to 100C°
- Channel type: PCIE X1, X4 and X16
- Expansion Channel: M.2 hard disk enclosure and graphics card dock for Thunderbolt 3 and 4
- Engineering debugging: JTAG 6-wire
- Data transfer: USB3.0/5000-6300 TYPE-C 3.2GEN2X2 8000-9500
- Supported firmware: For Lurker, Silver Shield, Atomic, Squirrel 10 people, independent firmware and universal firmware
- Software: Support universal DMA software on the market
Features:
DMA Board can Read and Write Memory Directly
- It bypasses any solution that might prevent you from accessing memory.
- USB3.0 high-speed transmission.
- Perfectly compatible with PCILEECH.
- It is simple and convenient to burning in a direct way
- Using 7 series FPGA
Direct Memory Access Board
This is a DMA PCIE card. Each customer is offered with an individually customized firmware to achieve no exclamation mark camouflage on your host system. Our camouflage device is recognized by Windows and can function normally. It is more stable and safer to use.
Each Board Has an Independent Firmware Compilation
Each customer is given an individually customized firmware to achieve invisibility without exclamation marks on your host system. Our device will be recognized by Windows as a normal device.
Next-generation Memory Access
It accesses the physical memory of a host system through direct storage, and you can explore and analyze the operating system and its processes in real time. This not only gives you control over the host system, but also bypasses any solutions that might prevent you from accessing memory. This is very helpful when analyzing any software and games, as you can be sure that your access and analysis are not detected and discovered thanks to LURKER.
------------------------------------------------------------------------
Terminator P1 Specifications(LeetDMA):
- Processor: 7 series FPGA
- Transmission: USB3.0 high-speed transfer (5GBPS)
- Perfectly compatible with PCILEECH
- Burning: Simple and convenient direct burning (USB)
Features:
Artix-7 FPGA
The PCIe board for LeetDMA contains a 7 series Artix-7 35T FPGA chip designed for highest performance.
SuperSpeed USB3.0
The device can communicate over USB3.0 up to 160MB/s. The FT600/FT601 is a SuperSpeed USB3.0 to FIFO interface bridge chip that provides up to 5Gbps of bandwidth.
Fully Compatible
It's 100% PCILeech compatible. PCILeech uses the PCIe board for LeetDMA to read and write to the target system memory. It is also usable with any PCILeech compatible software.
User Friendly
With the On-Board JTAG you can flash the board for LeetDMA easily with just an USB connection from the Update Port. You are not forced to use complicated JTAG cables.
Flashing
OpenOCD can be used to easily flash your own firmware to the device.
Customized Firmware
The board for LeetDMA comes pre-flashed with a fully customized firmware so it looks like a usual device for any software on the host system. Just plug it in and start using it without the need of flashing.
The board also has a physical "Kill-Switch" which can be used if you don't want to use the DMA-Board but don't want to remove it from your computer and also a connector for an external Kill-Switch.
DMA Board can Read and Write Memory Directly
- It bypasses any solution that might prevent you from accessing memory.
- USB3.0 high-speed transmission.
- Perfectly compatible with PCILEECH.
- It is simple and convenient to burning in a direct way
- Using 7 series FPGA
Direct Memory Access Board
This is a DMA PCIE card. Each customer is offered with an individually customized firmware to achieve no exclamation mark camouflage on your host system. Our camouflage device is recognized by Windows and can function normally. It is more stable and safer to use.
Each Board Has an Independent Firmware Compilation
Each customer is given an individually customized firmware to achieve invisibility without exclamation marks on your host system. Our device will be recognized by Windows as a normal device.
Next-generation Memory Access
It accesses the physical memory of a host system through direct storage, and you can explore and analyze the operating system and its processes in real time. This not only gives you control over the host system, but also bypasses any solutions that might prevent you from accessing memory. This is very helpful when analyzing any software and games, as you can be sure that your access and analysis are not detected and discovered thanks to LURKER.
------------------------------------------------------------------------
Terminator P1 Specifications(LeetDMA):
- Processor: 7 series FPGA
- Transmission: USB3.0 high-speed transfer (5GBPS)
- Perfectly compatible with PCILEECH
- Burning: Simple and convenient direct burning (USB)
Features:
Artix-7 FPGA
The PCIe board for LeetDMA contains a 7 series Artix-7 35T FPGA chip designed for highest performance.
SuperSpeed USB3.0
The device can communicate over USB3.0 up to 160MB/s. The FT600/FT601 is a SuperSpeed USB3.0 to FIFO interface bridge chip that provides up to 5Gbps of bandwidth.
Fully Compatible
It's 100% PCILeech compatible. PCILeech uses the PCIe board for LeetDMA to read and write to the target system memory. It is also usable with any PCILeech compatible software.
User Friendly
With the On-Board JTAG you can flash the board for LeetDMA easily with just an USB connection from the Update Port. You are not forced to use complicated JTAG cables.
Flashing
OpenOCD can be used to easily flash your own firmware to the device.
Customized Firmware
The board for LeetDMA comes pre-flashed with a fully customized firmware so it looks like a usual device for any software on the host system. Just plug it in and start using it without the need of flashing.
The board also has a physical "Kill-Switch" which can be used if you don't want to use the DMA-Board but don't want to remove it from your computer and also a connector for an external Kill-Switch.
-------------------------------------------------------------------------
Terminator Z1 DMA Features:
- Terminator C1 DMA, direct memory access
- XC7K325T FPGA high-performance chip
- Developed according to PCILEECH, compatible with all software developed by PCILEECH
- Industrial-grade design, fine workmanship and guaranteed quality
- Support USB3.0 and its maximum speed up to 5.0GBPS
- Custom firmware paddle, visual private firmware, easy to use
- Powerful performance: Thanks to professional design, excellent workmanship and powerful chips, the C1 set a record of up to 1W in testing
- Terminator C1 DMA, direct memory access
- XC7K325T FPGA high-performance chip
- Developed according to PCILEECH, compatible with all software developed by PCILEECH
- Industrial-grade design, fine workmanship and guaranteed quality
- Support USB3.0 and its maximum speed up to 5.0GBPS
- Custom firmware paddle, visual private firmware, easy to use
- Powerful performance: Thanks to professional design, excellent workmanship and powerful chips, the C1 set a record of up to 1W in testing
On Apr 13, 2023 at 21:38:47 PDT, seller added the following information:
On Jun 30, 2024 at 15:36:02 PDT, seller added the following information: