Design for 12V and 24V Batteries
TOPDON BT200 car battery diagnostic tester can work on all 12V and 24V 100-2000 CCA batteries including regular flooded, AGM flat plate, AGM spiral, as well as GEL batteries, with multiple applications for a broad array of vehicles, Such as a car, truck, marine, boat, motorcycle and more.
Displays accurate test results in seconds, including the battery test, the health status test, and the diagnosis of both starting and charging systems, cranking test, charging test, and other functions.
Cranking Test
For the cranking test, this 12V 24V battery tester will display the cranking voltage and the cranking time in milliseconds to check if the electrical system is getting enough power to start the engine.
Why you need a Topdon BT200 Battery Tester?
TOPDON BT200 Battery tester will provide the technician, professional and DIYer, with critical information about battery health status by identifying battery and charging problems quickly and accurately.
The advanced 2.4-inch color LCD screen makes BT200 Battery tester more eye-friendly and easier to read compared to other options. And it saves you time & money.
TOPDON BT200 Car Battery Tester 12V & 24V
Having your car’s battery unexpectedly die can really throw a wrench in your day. TOPDON BT200 battery tester is a cost-efficient method to test your battery, making sure it’s in good shape before you hit the road.
Display SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the readable analysis results on the 2.4-inch color LCD screen.
State of health (SoH) is a figure of merit of the condition of a battery (or a cell, or a battery pack), compared to its ideal conditions.
State of charge (SoC) is the level of charge of an electric battery relative to its capacity, SoC is normally used when discussing the current state of a battery in use
Cranking test helps you analyze the starting motor including cranking voltage and the cranking time to check the starting motor works properly or not.
Loaded Voltage means the voltage measured when turning on on-board electrical appliances, such as headlights.
Unloaded Voltage means the voltage measured when turning off all the on-board electrical appliances.
Test different parts of the charging system, including generator, rectifier, rectifier diode, and so on for a reliable charging volt value.
Use this battery load tester to check if the generator provides sufficient power to the vehicle electrical system, and if the battery can hold the charge.
Tired of the blurred blue screen? BT200 battery tester with 2.4-inch color LCD screen is eye-friendly and easy to read. Provides you a more comfortable visual experience at every inspection.
High precision amplifier and calibrated by professional instruments give you reliable results in seconds!
Even a beginner can use this battery tester to analyze any 12V & 24V batteries easily, gets everything about the battery, such as voltage, charge, cranking power.
Support both in-vehicle and out-of-vehicle tests, no need to remove the battery from the vehicle.
No afraid of extreme weather, TOPDON BT200 battery tester working temperature: -20°C~65°C (-4°F~140°F), storage temperature: -20°C~70°C (-4°F~158°F).
Test results based on JIS, EN, DIN, SAE, and IEC Standards, support multiple languages, English, Russian, Spanish, French, Italian, German.
NOTICE:
Always read the safety features section in the manual carefully to ensure optimum safety.
WARRANTY:
12-month warranty for any possible quality problems.
TIPS:
Feel free to get technical support via email/Q&A, or hotline on our official site, Facebook or Twitter.
SPECIFICATIONS:
Display: 2.4” LCD
Display Resolution: 320*240 Pixels
Cable Reach: 920 mm (36.22 inches)
Storage Temperature: -20°C~70°C (-4°F~158°F)
Working Temperature: -20°C~60°C (-4°F~140°F)
Dimensions (L*W*H): 178*94.5*33 mm (7*3.72*1.3 inches)
Weight: 440g (0.97lb)
PACKAGE LIST:
1*TOPDON Battery Tester BT200
1*User Manual