Material | PLA+ SILK | |
Print temperature | 200-230℃ | |
Printing speed | 30-60MM/s | |
Tensile force KGF | 6-8 | |
elongation at break | 200% | |
melting point | 165-180℃ | |
Thermal deformation temperature | 55℃ | |
Density | 1.24 g/cm ³ | |
Water absorption% | 0.70% |
No clogging,Smooth printing! | 100% Neat Wound Filament | Compatible with dryer box and printer |
FAQ:
● Why can't the filaments stick to the build bed easily?
● Please do 3 steps checking!
① Temperature
Please check the temperature(bed and nozzle) settings before printing and set it suitable.
② Building Bed
Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed.
③ Speed
Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s).
Notes
● Please insert the filament into the side holes after use to avoid tangles.
● Feel free to message us if you have any questions about the filament.
● Please stored the 3D printer filament in a sealed bag or box after using it.