Tunershop-banner

Eibach ProSpacer

Eibach Pro Spacer - Wheel Spacers


Width of spacers: 2x20mm
PCD: 4x108
Centerbore: 63,3mm

Eibach wheel spacer system 4




Eibach Pro-Spacer wheel spacers System 4 give the look and performance of your vehicle the finishing touch. Your vehicle gets a wider, more stable track - quickly and easily.

Eibach Pro-Spacer is the ideal combination for use with lowering springs, if the original or aftermarket wheels are missing that last optical "kick". With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That’s how the car’s look gets its final touch. By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner.

Product advantages:

  • Widen your stance - for better handling and appearance
  • Made of high-tensile-strength aluminum alloy
  • Perfect fit due to the smallest manufacturing tolerances, resulting in balanced wheel balance
  • All applications tested in rigid durability- and fatigue tests
  • High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
  • Significant weight advantage compared to wheel-spacers made from steel
  • ABE or parts certificate


    • Assembly instructions:

  • Disc with a screw system
  • With centering collar (centering nose)
  • Track change from 30 to 60 mm (disc thickness from 20 to 30 mm)
  • Fastening:
      a) disc at wheel carrier: by using special-fixing nut
      b) wheel at disc: by using production (or accessory) -nut


    • with pressed-in knurled studs inkl. short special wheel nuts, TÜV-certificate as download
    Eibach product code: S90-4-20-010

    Notes:
    S9 - ATTENTION - ALSO NOTE ON SERIES WHEELS! - When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers! Please check as follows: Stud lengh (e.g. 25mm) minus spacer-thickness (e.g.15mm) = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have minimum 22mmx22mm height/width to take the overlaping nut. It´s allowed to shorten the stud bolt with a saw (Maximal up to the beginning of the nut. - We recommend only to shorten the minimum lengh.) If shorten the stud bolts, first please consider that all wheels used at the car still will fit (e.g. summer- / winterwheels) ATTENTION: when using 15 mm wheelspacers at least 7 mm deep cut-outs are needed (at 20mm wheelspacers at least 2mm deep cut-outs are needed) as the nuts stand over the contact surface! It´s allowed to shorten the stud bolts
    S23 - Not permitted for vehicles with steel wheels!

    Eibach wheel spacer 2x20mm for Ford B-MAX ECOSPORT FIESTA V FIESTA VI S90-4-20-010 Pro-spacer

    Fits for:

    ManufacturerModelType
    FORDB-MAX (JK)1.0 EcoBoost
    FORDB-MAX (JK)1.4 LPG
    FORDB-MAX (JK)1.4
    FORDB-MAX (JK)1.5 TDCi
    FORDB-MAX (JK)1.6 TDCi
    FORDB-MAX (JK)1.6 Ti
    FORDB-MAX Van (JK)1.0 EcoBoost
    FORDB-MAX Van (JK)1.4 LPG
    FORDB-MAX Van (JK)1.4
    FORDB-MAX Van (JK)1.5 TDCi
    FORDB-MAX Van (JK)1.6 TDCi
    FORDB-MAX Van (JK)1.6 Ti
    FORDECOSPORT1.0 EcoBoost
    FORDECOSPORT1.5 EcoBlue TDCi
    FORDECOSPORT1.5 TDCi EcoBlue 4x4
    FORDECOSPORT1.5 TDCi EcoBlue
    FORDECOSPORT1.5 TDCi
    FORDECOSPORT1.5 Ti
    FORDECOSPORT1.5 Ti-VCT
    FORDECOSPORT1.6 Ti-VCT
    FORDECOSPORT1.6
    FORDECOSPORT2.0 4x4
    FORDECOSPORT2.0 Ti-VCT 4x4
    FORDECOSPORT2.0 Ti-VCT
    FORDFIESTA V (JH_ JD_)1.0
    FORDFIESTA V (JH_ JD_)1.25 16V
    FORDFIESTA V (JH_ JD_)1.3 ROCAM
    FORDFIESTA V (JH_ JD_)1.3
    FORDFIESTA V (JH_ JD_)1.4 16V
    FORDFIESTA V (JH_ JD_)1.4 TDCi
    FORDFIESTA V (JH_ JD_)1.6 16V
    FORDFIESTA V (JH_ JD_)1.6 TDCi
    FORDFIESTA V (JH_ JD_)1.6
    FORDFIESTA V (JH_ JD_)ST150
    FORDFIESTA V Van1.3
    FORDFIESTA V Van1.4 TDCi
    FORDFIESTA V Van1.4
    FORDFIESTA V Van1.6 TDCi
    FORDFIESTA VI (CB1 CCN)1.0 EcoBoost
    FORDFIESTA VI (CB1 CCN)1.0 Sport
    FORDFIESTA VI (CB1 CCN)1.0
    FORDFIESTA VI (CB1 CCN)1.25
    FORDFIESTA VI (CB1 CCN)1.4 LPG
    FORDFIESTA VI (CB1 CCN)1.4 TDCi
    FORDFIESTA VI (CB1 CCN)1.4
    FORDFIESTA VI (CB1 CCN)1.5 Duratec
    FORDFIESTA VI (CB1 CCN)1.5 Flex
    FORDFIESTA VI (CB1 CCN)1.5 TDCi
    FORDFIESTA VI (CB1 CCN)1.6 ST
    FORDFIESTA VI (CB1 CCN)1.6 ST200
    FORDFIESTA VI (CB1 CCN)1.6 TDCi
    FORDFIESTA VI (CB1 CCN)1.6 Ti
    FORDFIESTA VI (CB1 CCN)1.6
    FORDFIESTA VI Van1.0 EcoBoost
    FORDFIESTA VI Van1.0
    FORDFIESTA VI Van1.25
    FORDFIESTA VI Van1.4 TDCi
    FORDFIESTA VI Van1.4
    FORDFIESTA VI Van1.5 TDCi
    FORDFIESTA VI Van1.6 ST
    FORDFIESTA VI Van1.6 TDCi
    FORDFIESTA VI Van1.6 Ti-VCT


    Eibach Pro Spacer | Wheel Spacers

  • Made from high-tensile-strength aluminum alloy
  • Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
  • All applications tested in rigid durability- and fatigue tests
  • High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
  • Significant weight advantage compared to wheel-spacers made from steel


    • Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick".

    With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That’s how the car’s look gets its final touch.
    By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner.

    Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer!

    The Pro-Spacer is available in different versions from 5 to 30 mm width.