Description
100BASE-T1 Media Converter STD MNET HMTD NETbrige PRO to RJ45 Standard Ethernet
Description:
This module is used for physical layer bidirectional data conversion between the vehicle two-wire Ethernet 100baseT1 interface and the standard Ethernet RJ45.
Features:
1. Using tja1100 automotive Ethernet PHY chip for NXP, with excellent performance and good anti-interference. It can communicate with branded automotive Ethernet chips such as for Broadcom, Marvell and TI
2. This product is compact and lightweight. The dimensions are 103.2 x 71 x 26.5cm/4.1 x 2.8 x 1" (LxWxH). The housing is made of a strong and lightweight aluminum alloy.
3. Its power supply chip adopts original TPS54620 for TI. It boasts wide input voltage, stable operation and small ripple.
4. It can be powered by TYPE C and DC power supply. Users can use a standard 5.5mm DC power adapter, or use the USB interface of computer and mobile phone charger to directly supply power.
5. The measured transmission distance is about 15m/49.2ft, the stable rate is 940MB/s, and there is no packet loss.
Specifications:
- Model: 100BT1
- Conversion protocol: 00BASE-T1 two-wire automotive Ethernet / 100BASE-T RJ45 standard Ethernet
- Multi-function indicator: signal quality: green - excellent signal; red - weak signal (indicates the status of the connection). Waiting for connection: The green light flashes periodically. Disconnected: red light stays on
- 100BASE-T RJ45 indicator: green light stays on: 100BASE-T connected. Flashing yellow light: Data passed
- Adaptive master-slave mode: The converter automatically adjusts to the corresponding master-slave mode according to the target device
- One-key manual master-slave mode: For the convenience of debugging, the manual mode is retained, and the master-slave switch does not need to be reset
- Input voltage: 4.5-17V (default 12Vdc)
- Power supply mode: USB TYPE C (mobile phone charger and computer) / DC power supply
- Shell material: aluminum alloy
- Weight: 130g/0.3lb
- Size: 103.2 x 71 x 26.5cm/4.1 x 2.8 x 1" (LxWxH)
Optional:
- STD and PRO Interface: 15EDG 3.81mm (universal interface)
- MNET Interface: MATENET for TE
- HMTD Interface: H-MTD connector for Rosenberger
- NETbrige+ Interface: NETBrige+ for Amphenol
Package Included:
- 1 x 100BASE-T1 Media Converter
- 1 x 12V DC Power Adapter
- 1 x Type C Power Cable
- 1 x 1.5m/4.9ft Network Cable
Description:
This module is used for physical layer bidirectional data conversion between the vehicle two-wire Ethernet 100baseT1 interface and the standard Ethernet RJ45.
Features:
1. Using tja1100 automotive Ethernet PHY chip for NXP, with excellent performance and good anti-interference. It can communicate with branded automotive Ethernet chips such as for Broadcom, Marvell and TI
2. This product is compact and lightweight. The dimensions are 103.2 x 71 x 26.5cm/4.1 x 2.8 x 1" (LxWxH). The housing is made of a strong and lightweight aluminum alloy.
3. Its power supply chip adopts original TPS54620 for TI. It boasts wide input voltage, stable operation and small ripple.
4. It can be powered by TYPE C and DC power supply. Users can use a standard 5.5mm DC power adapter, or use the USB interface of computer and mobile phone charger to directly supply power.
5. The measured transmission distance is about 15m/49.2ft, the stable rate is 940MB/s, and there is no packet loss.
Specifications:
- Model: 100BT1
- Conversion protocol: 00BASE-T1 two-wire automotive Ethernet / 100BASE-T RJ45 standard Ethernet
- Multi-function indicator: signal quality: green - excellent signal; red - weak signal (indicates the status of the connection). Waiting for connection: The green light flashes periodically. Disconnected: red light stays on
- 100BASE-T RJ45 indicator: green light stays on: 100BASE-T connected. Flashing yellow light: Data passed
- Adaptive master-slave mode: The converter automatically adjusts to the corresponding master-slave mode according to the target device
- One-key manual master-slave mode: For the convenience of debugging, the manual mode is retained, and the master-slave switch does not need to be reset
- Input voltage: 4.5-17V (default 12Vdc)
- Power supply mode: USB TYPE C (mobile phone charger and computer) / DC power supply
- Shell material: aluminum alloy
- Weight: 130g/0.3lb
- Size: 103.2 x 71 x 26.5cm/4.1 x 2.8 x 1" (LxWxH)
Optional:
- STD and PRO Interface: 15EDG 3.81mm (universal interface)
- MNET Interface: MATENET for TE
- HMTD Interface: H-MTD connector for Rosenberger
- NETbrige+ Interface: NETBrige+ for Amphenol
Package Included:
- 1 x 100BASE-T1 Media Converter
- 1 x 12V DC Power Adapter
- 1 x Type C Power Cable
- 1 x 1.5m/4.9ft Network Cable
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On May 10, 2023 at 03:34:28 PDT, seller added the following information:
On Jul 12, 2023 at 05:43:01 PDT, seller added the following information: