PACKAGE CONTENT:( NOT include Raspberry Pi Pico.)
Please confirm the LoRa frequency band used in your country,
Please do NOT select the wrong frequency band.
Pico-LoRa-SX1262 x1
3.7V 600mAh Li-po battery x1
Antenna 2DB 915mhz x1
IPEX1 to SMA wire x1
WIKI English manual: waveshare.com/wiki/Pico-LoRa-SX1262
LoRaWAN Protocol Support, EU868 Band
Please confirm the LoRa frequency band used in your country,
Please do NOT select the wrong frequency band.
The Pico-LoRa-SX1262-868M is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262, which supports LoRaWAN protocol and EU868 band. It is allowed to connect the TTN, TTS servers through a LoRa gateway to use LoRa Cloud service fast and easily.
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
Supports LoRaWAN protocol and EU868 band
PH1.25 battery and recharge controller, allows connecting rechargeable Lithium battery
2x LED indicators for monitoring module operating status
Wiki English manual (example in C)
RFID | SX1262 |
Frequency range | EU868 (863~870MHz) |
Modulation | LoRa/(G)FSK |
Emit power | >14dBm@3.3V |
Operating voltage | 3.3V |
Module power consumption | emitting current: 45mA@14dBm |
Communication bus | SPI |
Operating temperature | -40 ~ 85℃ |
Dimensions | 21.00 × 52.00mm |
Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
Raspberry Pi Pico header
Status indicators
PWR: power indicator
CHG: recharge indicator
RF switch control
A: controlled by high level (default)
B: controlled by GPIO22
MCP73831 recharge IC
SX1262 module
IPEX 1 antenna connector
Power switch
PH1.25 battery header