3 years warranty ! lifetime long technical support & free parts replacement !
High quality guaranteed! You get what you pay for!
This machine is 110v, if you wanna 220v one ,please let us know.
Product details:
Model: DC-30+
Type: desktop perfect binding machine.
Milling cutter：yes
Max binding size: 320x 280mm (12.6''x 11'')
Max binding thickness: two pages-40mm
Max cover thickness:50-400g
Heating time: 15min (depends on ambient temperature)
Power: 500W
Dimension: 650x350x500mm
Machine net weight: 36kg
Preheating time: 10 mins
Digital temperature control: Yes
2. 1 x Power cord
3. 1 x Adhesive can cap
4. 1 x Gliding handle of the adhesive can
5. 1 x Service manual
6. 1 x Adhesive bag
8. 2 x Fuse
9. 2 x Inner hexagon spanner
Operating Instructions
1. Temperature-controlling instrument: the temperature is arranged at 338 ℉ at the time of exfactory (using the hot melt glue provided by our company); If hot melt glue of other style is adopted, the temperature can be adjusted according to its melting point. 2. Operations of milling cutter: push the cutter to-and-fro, when the book spine is well milled, brush the adhesive. 3. Hardcover hot groove-pressing device put the hard cover in the paper pressing clamp tightly and press the right handle down to tighten the hard cover for 5-10 seconds. Attention: there is electricity-powered constant temperature device (50℃) on the hardcover hot groove-pressing board; therefore, it should be avoided from destruction or touched by hands. The small switch at the right side can control whether the hardcover hot groove-pressing board is connected with electricity, so that the user can choose hot-pressing or cold-pressing.
Installation:
Please lay the machine on a steady working platform, avoiding wet
place. Proper space around should be ensured for convenient operation
The can cap, and the gliding handle should be installed.
Preparations before installation:
1. Please connect to suitable power, and check the amount of the left
adhesive. Adhesive granule should be added in time. The heights of
the adhesive not overrun the pointer inside the adhesive can.
2. After connect the power, turn on the switch. And the adhesive can is
heated. The hot-melt time is 15-20 min.
CAUTION: Do not push the adhesive can when it is cold or the
hot-melt time is not sufficient, or else it can be
damaged
Keep the surroundings of the machine clean
avoiding the impurity getting into the adhesive can and
causing damage
Avoid touching the adhesive roller with the hard
material which can damage it.
Please turn off the switch and cut off the power when
the machine is not used.
3. Please check whether the cover pressing board suits the cover of the
documents to be made.
4. Put the right handle at position N
CAUTION:
1. Please ensure no impurity get into the adhesive can, such as waste
paper, wood dust, steel pin, etc, or the can can be jammed.
2. The folding line should be well folded to ensure the rectangular
shape of the spine. To buy a creasing machine is recommended.
3. The quantity of added adhesive should not overrun the position
pointed by the arrow in the can, or the adhesive will overflow.
Pro A4 Size Hard Cover Case Maker Portable Hardback Hardbound Making Machine
Application:
Suitable for making hard cover books, CD and DVD boxes, ring binders, photo albums, restaurant menus…
In a short time, you can produce high-quality books in a wide variety of formats.
Cover, cardboard of the cover and cardboard of spine are located accurately; the thickness of cardboard can be 0.5-6 mm.
Specification:
The machine takes use of the principle of reflection and refraction of light to position the cover at the central area, so one can see the position of the book spine clearly. The positioning speed and precision is greatly improved.There is also assistant sucking device under pressure to make the cover flat and not move, so there will be no air bubbles. The cover, cardboard and central spine board can be adjusted and positioned accurately. The adaptble thickness of cardboard is 0.5-6 mm
Printing and binding professionals know that the secret to satisfied, repeat customers is the quality of the finished product. Customers are demanding more personalization to set their company collateral apart from the competition. Company image is everything.
Imagine, being able to created a fully decorated hard cover on-demand in minutes! You are only limited by your imagination. Print photos, logos, artwork or text. Let your customers be in control of their image versus being limited by technology.
Steps to creating a custom hard cover (case book):
Step 1: Insert your chipboard or card stock in the rotating arm of the DW-100H and turn on the table light.
Step 2: Print your image on super-size tacking sheet (inkjet printable back Adhesive plastic sheet) which can be bought from local Sign supplies store). You can optionally laminate the sheet using an 8 micron laminate for protection. Peel off the pressure sensitive backing and lay the sheet face down on the DW-100H table.
Step 3: Rotate the DW-100H arm, which lowers the card stock onto the tacking sheet in the precise position. Trim the corners at 45 degrees and fold over the four edges.
Step 4: Run the cover through the laminator to cold pressure press out any paper bubbles or wrinkles. Your hard cover is now ready for binding!
Step 5: Place a hard cover fly-sheet on each side of your book block. Bind the book on a binding machine and then peel out the backing from the fly sheets. The inside chipboard is now covered. If you wish, you can pre-print on the inside of the cover fly-sheets to give your book that extra professional touch.
Deatils Show:
