HGM6100K series generator controller integrating digital, intelligent and network techniques is used for automatic control system of diesel generator. It can carry out functions including automatic start/stop, data measure and alarming. The controller uses LCD display, optional Chinese and English display interface with operation easy and reliable.
HGM6100K series generator controller uses micro-processing technique which can carry out precision measure, constant value adjustment, timing and threshold setting and etc. of multi-parameters. It can be widely used in all types of generator automatic control system for compact structure, advanced circuits, simple connections and high reliability.
PERFORMANCE AND CHARACTERISTICS
HGM6100K controller has four types:
HGM6110K/6110KC: Automatic Start Module, it controls generator to start/stop by remote start signal
HGM6120K/6120KC: Based on HGM6110K/6110KC and add mains AC monitoring, Mains/Generator automatic switching control functions (AMF), especially suitable for the automation system composed by Mains and Generator.
Note1: HGM6110KC/6120KC with RS485 interface, HGM6110K/6120K without RS485 interface.
Note2: And then take HGM6110KC/6120KC with text as an example to describe.
Using microprocessor as a core, symbol LCD with backlight display, the three languages display Chinese, English and Spanish, key touch operation
Have a RS485 port with Modus communication protocol
Adapt to 3phase-4wires, single phase-2wires or 2phase-3 wires (120/240V) , 50/60Hz AC power system
Precision measure and display of
Measure and display 3 phase voltage, 3 phase current, frequency, power etc. parameter of Mains and Gens
Mains have over voltage, under voltage, loss phase function Gens have over voltage, under voltage, over frequency, under frequency, over current function
Precision measure and display parameters about Engine
Control protection: Automatic crank/stop of diesel engine, load transfer(ATS control) and completely faults display protection
With ETS, idle control, pre-heat control, raises speed control functions, and all types of them are belong to relay output
Parameters setting: Allow user to modify setting and store them by inside internal FLASH memory, the parameters can not be lost even with power off. All of parameters can be set not only from the front panel, but by PC via SG72 (an adaptor, USB-LINK-RS485) module or, through RS485 port via PC
Most of temperature, pressure, oil level sensor can be directly used, and also user can define sensor curve by themselves
Multiple crank disconnection conditions can be selected.(Speed sensor, oil pressure, gens)
Power supply range is wide(8~35)VDC, accommodating to different starting battery voltage environments
All parameters use digital modulation, abandoning analog modulation using conventional electronic potentiometer, more reliability and stability
Modular configuration design, Flame Retardant ABS plastic shell, inserted type connection terminals, flush type installation, compact structure, easy installation.
Operating Voltage | DC8. 0V to 35. 0V, Continuous Power Supply |
Power Consumption | <3W |
Alternator Input Range Single phase 2 wire 3-Phase 4 Wire 3-Phase 3 Wire 2-Phase 3 Wire | 15V AC - 360 V AC (ph-N) 15V AC - 360 V AC (ph-N) 30V AC - 600 V AC (ph-ph) 15V AC - 360 V AC (ph-N) 30V AC - 600 V AC (ph-ph) |
Alternator Input Frequency | 50Hz - 60 Hz at rated engine speed |
Magnetic Input Range | +/- 0. 5 V to 70 V Peak |
Magnetic Input Frequency | 10,000 Hz (max) at rated engine speed. |
Start Relay Output | 16 Amp DC at supply voltage. |
Fuel Relay Output | 16 Amp DC at supply voltage. |
Auxiliary Relay Output (1-4) | (1-3)16 Amp DC at supply voltage,(4)6A 250VAC |
Close Mains Relay | 16A 250VAC free voltage contact |
Close Generator Relay | 16A 250VAC free voltage contact |
Dimensions | 240mm x 172mm x 57mm |
Panel cutout | 216mm x 160mm |
Charge Fail / Excitation Range | 0 V to 35 V |
Operating Temperature Range | -25 to +70°C |
Storage Condition | Temperature: (-40 to+ 70)°C |
C. T. Burden | 2. 5VA |
C. T. Secondary | 5A |
Weight | 0. 90kg |