4G LTE CAN USB HUB IoT Kit for RPI Raspberry Pi Compute Module 4 CM4 Lite 8GB

PACKAGE CONTENT: (  NOT include Compute Module 4 )

 

  1. CM4-IO-WIRELESS-BASE x1

  2. PCIe to 4G/LoRa adapter x1

  3. Screwdriver x1

  4. Screws pack x1

  5. 4G module(SIM7600G-H-PCIE) ​PCB antenna IPEX connector ​12V 2A power adapter

​ ​

Industrial IoT Module Based On CM4

Suitable For IoT Applications Like IoT Getaway, Wireless Router, Intelligent Data Acquisition...

4G/LoRa Support, Multi Interfaces

 

This is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC.

Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.

Part List Comparison

 

BASIC KIT

BASIC KIT + 4G MODULE

CM4 wireless base board

√

√

Black ABS case

√

√

PCIe to 4G/LoRa adapter

√

√

SIM7600G-H-PCIE 4G module

 

√

PCB antenna

 

√

* please refer to Package Content for exact part list info.

Specifications

CM4 SOCKET

suitable for all variants of Compute Module 4

NETWORKING

Gigabit Ethernet RJ45

M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module

Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication

USB

USB 2.0 × 3

PIN HEADER

Non-isolated RS485 × 2, Non-isolated CAN × 1, Partial GPIO pins

CAMERA

MIPI CSI-2 × 1 (15pin 1.0mm FPC connector)

VIDEO

HDMI × 1, supports 4K 30fps output

RTC

Real-time clock with battery socket and ability to wake Compute Module 4

STORAGE

MicroSD card socket for Compute Module 4 Lite (without eMMC) variants

FAN HEADER

5V/12V, allows speed adjustment and measurement

POWER INPUT

5V or 7~36V

DIMENSIONS

145 × 90 × 40mm

 
Connecting With Compute Module 4

Standard CM4 Socket And Partial Raspberry Pi GPIO Header ​Suitable For Compute Module 4 Lite/EMMC Series Module

4G/LoRa Wireless Modules Support

Onboard M.2 Slot, Comes With Mini-PCIe Adapter As Well, ​Compatible With 4G/5G/LoRa Wireless Modules With M.2 Or Mini-PCIe Interface

An additional communication module is required to enable 5G/4G/3G/2G cellular network or LoRa gateway function, recommended: SIM7600G-H-M.2, SIM8202G-M2, SIM8200EA-M2, SIM7600G-H-PCIE, SX1302 868M LoRaWAN Gateway
SIM7600G-H-PCIE 4G Module Optional

  • 4G/3G/2G communication, GNSS positioning, global coverage

  • Standard Mini-PCIe interface, high compatibility

  • Multi-constellation high accuracy positioning GNSS receiver support

  • Suitable for LTE, UMTS, and GSM network with global coverage

  • Abundant software functions: OTA, LBS, TLS, VoLTE

  • Up to 150Mbps (Max) downlink data rate and 50Mbps (Max) uplink data rate

  • Supports popular OS driver: Windows, Linux, Android etc.

  • AT commands of the SIM7600G-H-PCIE series are compatible with the SIM7500/SIM7600 series modules

  • Please refer to SIM7600G-H-PCIE product page for details

  • For quantity of 20pcs or more, other M.2 or Mini-PCIe modules are customizable (SIM7600CE-T / E-H / A-H, etc.), feel free to contact us

Rich Interfaces

Providing Interfaces Including: CSI / HDMI / USB / ETH / CAN / RS485 / M.2 B KEY

Reserved Space For Heat Dissipation
for reference ONLY, heatsink and cooling fan are NOT included.
Rail-Mount Support

Rail-Mount ABS Protection Case, Easy To Install, More Safe Operation

Application Example

Suitable For IoT Gateway, 4G/5G Router, IoT Data Acquisition And Monitoring, Industrial PLC, Or Other Industrial Applications

for reference only, CM4, display are NOT included.
What's On Board

  1. CM4 socket ​suitable for all variants of Compute Module 4

  2. HDMI connector ​supports 4K 30fps output

  3. USB 2.0 ports ​3x USB 2.0, for connecting sorts of USB devices

  4. RJ45 Gigabit Ethernet ​10/100/1000M compatible

  5. DC power supply ​7 ~ 36V DC input

  6. CM4 status indicator ​PWR: Raspberry Pi power indicator ​ACT: Raspberry Pi operating status indicator

  7. 4G/5G module status indicator ​M.2 PWR: module enable indicator ​M.2 NET: module operating status indicator

  8. PWR & USB ​5V DC power supply or USB programming port

  9. M.2 B KEY ​supports 4G/5G modules, or other communication modules using USB channel

  10. Nano-SIM card slot ​supports standard Nano-SIM card for 5G/4G/3G/2G communication

  11. BOOT selection ​ON: CM4 will be booted from USB-C interface ​OFF: CM4 will be booted from eMMC or Micro SD card

  12. DC power supply ​7 ~ 36V DC input

  13. Dual non-isolated RS485 ​2x RS485, with 600W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R optional balancing resistor jumper)

 

  1. Non-isolated CAN ​ESD protection and transient spike voltage protection (reserved 120R optional balancing resistor jumper)

  2. Micro SD card slot ​for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)

  3. FAN header ​for connecting cooling fan, allows speed adjustment and measurement

  4. CAM ​MIPI CSI camera port, 15Pin 1mm pitch

  5. RTC battery holder ​supports CR1220 button cell

  6. M.2 VCC selection ​select 3.3V or 4.2V power supply

  7. RTC interruption configuration ​PI-RUN: CM4 will reboot on RTC interruption ​GL-EN: CM4 powerdown on RTC interruption ​D17: D17 pin is triggered on RTC interruption (default)

  8. IO-VREF selection ​set the CM4 IO logic level as 3.3V (default) or 1.8V

  9. FAN power supply selection ​select 12V (default) or 5V power to drive the fan

  10. System function configuration ​BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY ​WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY ​WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card

  11. RTC/FAN I2C bus selection ​SDA0/SCL0: I2C-10 is shared with CSI/DSI (default) ​GPIO3/2: I2C-1 is shared with GPIO header

  12. Partial GPIO header ​including 1x I2C, 2x GPIO pins, and power supply

Outline Dimensions

 

It takes 12-20 working days to arrive most European countries using standard shipping.
Some European island countries, overseas territories and South American countries need to arrive in 25-35 working days.
 
For urgent parcel, you can email us and choose Fedex, DHL, UPS, EMS etc., but you need to pay extra fee.
If you need to use the express delivery service, please contact me via eBay mail.
We absolutely stand behind our products. All of our items will be checked and tested before shipment to ensure 100% performance.
 
We also offer 15 day money back guarantee if you are unsatisfied for any reason whatsoever. We will refund the entire cost of the item not including the shipping and insurance charges. Our aim is 100% customer satisfaction!
 
If you are unclear about product usage, please feel free to contact us. We will offer your detailed instructions for use.
PushAuction