*Compatible mentioned can not show up all Car model. Please check the Correct bulb size of your vechicle. it will work and fit.Thank you!
*If you are unsure your bulb type, please do remember send message to tell us your car make, model, year and other information which is helpful to check bulb type.
*Professional installation is highly recommended if you have any difficult in installation.
Note:
No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns!
When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage. The LED has positive and negative polarity, if it is not bright, turn the direction and reinstall;
Features:
1. It can directly replace the traditional tungsten bulb of the original car;
2. The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers
3. There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.
4. LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!
5. It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions
6. LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.
Specification:
Plug Type: 9007, Dual Beam
Power(per set): 100W/Set, 50W/bulb
Luminous Flux: 8000lm/set (4000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K - 6500K
IP68 rated water and dust seal,over 20000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight, fog light
(4pcs/set) COB Hi-Lo Beam LED Headlight Fog Light Conversion Kit
Latest COB chip light source, 2 luminous faces(270/360 degree) no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
LED headlight advantages:
****LED lamps are more energy and power than conventional halogen lamps.
****The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
****Instantly start without strong current impact, improve battery life by more than 30%.
****Fast cooling , using the most advanced, heat-dissipating structural design.
****The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
****Low heating temperature, The working temperature of helium can reach 800°-1000°
****LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Package Included:
2x 9007 LED Headlight Bulbs
2x 9145 LED Fog Light Bulbs
![](https://counter.pushauction.com/a5420c98-fda5-4908-9053-d01b91827f74/53332151-21f8-49ea-90fa-afdaa97a00cb.jpg)
![Engineered for professional sellers PushAuction](https://image.pushauction.com/poweredbypushauction.png)