User-friendly Design ： Hand-held size, clearly arranged K-ey pad, menu-driven navigation, hotk-eys and 2.8'' color screen together make the engine tool extremely easy to use.

- DTC Lookup : Detailed definition of fault codes

-Comptible with most 12V OBDII/EOBD/JOBD Car of the world , 【USA car most from 1996 -now ;  Asian car most from 2004- now  ;  European car most from 2003 -now ; China car most from 2008- now 】

-Plug in and Play :this obd2 scanner support Plug and Play function.NO NEED BATTERY. plug into the OBD II port on your car and turn ignition on then read the car's vehicle information with the reader.

- User-friendly design,3.8 inch color screen display,one-hand operation.

-Lifetime free update :not like other basic scan tool can't do update, NT301 obd2 scanner provides life-time FREE software update via USB

-Supports Screenshot function,click the up and the down button at the same time 3s to get screenshot.

-Enjoy Quick Emission Test : The oxygen sensor monitor allows the PCM to verify that the O2 sensors are properly calibrated and functioning without noticeable deterioration under normal engine operating conditions. ediag ya-101 obd2 scanner helps you get fully prepared for passing the smog check.

-Enhanced OBDII-EVAP System test (MODE 8) :EVAP System test (Component Test) lets you initate a leak test for the vehicle’s EVAP system.After fixed a problem with the fuel system,you can verify your fix right away, without waiting a few days( or longer) for your car to run it automatically

-Enhanced OBDII- On-Board Monitor Test MODE6 :Mode 06 keeps watch on how all of the sensors and other emission control components are functioning. it can reveal the inner workings of the OBD II system, and can tell you when a code is going to set even before it sets the code and turns on the Check Engine light.

- Misfire Cylinder Test: Helps to clear the fault code of one abnormal cylinder .Helps to the PCM read the CKPS information and detect which cylinder has issue.

 

 

What Engine data can be Read by NT301 ?

The Foxwell NT301 obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts might cause your check engine light on include:

 FUELSYS(fuel system status), 
LOAD_PCT(Calculated load value), 
ECT(Engine Coolant Temperature), 
SHRTFT(Short term fuel trim-bank), 
LONGFT(Long term fuel trim-bank), 
Engine RPM, 
VSS(Vehicle Speed Sensor), 
SPARKADV(Ignition timing advance for cylinder 1),
 IAT(Intake air temperature), 
MAF(Mass Air Flow), 
TP(Absolute Throttle Position), 
EQ_RATB1S1(Equivalence Ratio Bank 1, Sensor1), 
O2B1S1(Oxygen sensor output voltage), 
EVAP_PCT(Commanded Evaporative Purge), etc. 

Accurately read error codes for most  12V diesels & gas vehicles of Worldwide  ,such as the  SUVs, light trucks  with standard Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.

✔ Product Features:

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability .

     

 

 Standard OBD2 Protocols:
 
1. SAE J1850 PWM (41. 6 Kbaud)

2. SAE J1850 VPW (10. 4 Kbaud)
3. ISO9141-2 (5 baud init. , 10. 4 Kbaud)
4. ISO14230-4 KWP (5 baud init. , 10. 4 Kbaud)
5. ISO14230-4 KWP (fast init. , 10. 4 Kbaud)
6. ISO15765-4 CAN (11 bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29 bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11 bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29 bit ID, 250 Kbaud)

 

NT301 Suppport Car list:

1. America Car List: from 1996 years to now
Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep

2. Europe Car List: from 2002 years to now
Fit for Alfa Romeo ,Fit for SAAB ,Fit for Acura ,Fit for Opel, Fit for Audi ,Fit for Seat ,Fit for Peugeot ,
Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover
Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar 

3. Asia Car List: (include Australia): from 2003 years to now
Fit for KIA ,Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda 
Fit for Nissan ,Fit for Subaru ,Fit for Suzuki, Fit for Toyota

4. Chinese Car List : from 2008 years to now
Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry