New Beckhoff EL1889 PLC Module EL 1889 In Box
️+ Welcome to Howa's Store, Enjoy Your Happy Shopping!
|
BECKHOFF EL1889
The EL1889 digital input terminal module takes the binary 24 V control signals from the process level and transmits them in the form of electrical isolation to the higher level automation unit. The EtherCAT terminal module has 16 channels whose signal status is indicated by leds. Power contact through. For the EL1889, the reference ground for all inputs is the 24 V power supply contact.
Features:
- Ground switch
- Due to the 3-millisecond input filter, it does not jump due to mechanical switching
- Tool free connection of solid wire conductors is realized by direct insertion technology
- Save space in the control cabinet
- Directly connect multi-channel sensors with 1-wire connection technology in minimum space
- Technical data EL1889
- Connect Technology 1 wire
- Number of inputs 16
- Nominal voltage 24V DC (-15% /+ 20%)
- "0" signal voltage 18... 30 volt
- "1" signal voltage 0... 7 Volts
- Typical input current is 3 mA
- Input filter typical value 3.0 ms
- Distributed clock -
- Current consumption power supply contact typical value 35 MA
- Current consumption E-bus typical value 110 mA
- Electrical isolation 500 V (E bus/field potential)
- Configuration No address or configuration Settings
- It weighs about 55 grams
- Operating/storage temperature -25... +60 °C/-40… +85 °C
- Relative humidity 95%, no condensation
- Vibration/shock resistance according to EN 60068-2-6/EN 60068-2-27
- EMC immunity/radiation compliance EN 61000-6-2/EN 61000-6-4
- Protection. Rating/Installation position IP20/ variable (see documentation)
- Certification/mark CE, UL, ATEX, IECEx
- Explosion-proof mark ATEX:
- II 3 G Ex nA IIC T4 Gc
- IECEx:
- Ex ec IIC T4 Gc
Housing data
Reach a peak
Housing data EL-12-16pin
Design form HD (high density) housing with signal LED
Material polycarbonate
Dimensions (W x H x D) 12 mm x 100 mm x 68 mm
Mounted on 35 mm DIN rail with lock in accordance with EN 60715
It is connected by double-slot keys installed side by side
Label the BZxxx series
Wiring solid conductor (e) : direct insertion technology; Thin strand (f) and ferrule (a) : spring driven with screwdriver
Connection section s* : 0.08... 1.5 mm²,
st* : 0.25... 1.5 mm²,
f* : 0.14... 0.75mm ²
Connection Section AWG s* : AWG 28... 16,
st* : AWG 22... 16,
f* : AWG 26... 19
Strip length 8... 9 mm
Current load power supply contact I Max: 10 A
*s: solid wire; st: stranded wire; f: With ferrule