BM310 / BM320 12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display
Do you have Headache of these Situation ?
1. Battery life remain ?
2. How to check the battery health ?
2. How is my battery charging ?
4. How to check my battery ?
5. Is it the time to change battery ?
6. What is the condition of my battery ?
If yes , pls choose BM310 / BM320 12V Digital Car Battery Tester
The BM310/BM320 can quickly detect the car battery condition and charge level with the corresp-onding LED to display. Suitable for battery cars, motorcycles 12V batteries such as cars, golf C-arts, and family cars (except for 24V batteries). Simple operation, The internal security chip ens-ures stable operation, high temperature resistance and low temperature resistance.
The function of BM310 / BM320 12V Digital Car Battery Tester :
1. Checking charge level
2. Functional test of dymano
3. Checking battery starting capability
4. Battery overload display
Why choose BM310 / BM320 12V Digital Car Battery Tester ?
We pursue exquisite craftsmanship and excellent quality.
1. No leakage, no heat, safe operation.
2. Operated without interruption, full protection, Reverse protection.
3. Quick and accurate display of battery test results (only cost 3 seconds).
4. It can be detected directly in the car without removing the battery.
5. It shows the health condition of battery.
6. Signal testing through low frequencies does not require an extemal charging.
7. Directly check if the car's charging voltage is normal.
8. Detect the starting voltage of the car.
9. Detect the overload status of the car battery.
How to use BM310 / BM320 12V Digital Car Battery Tester ?
To BM310 :
Connect the test clips to battery positive and negative position, check the LED display to
know the car battery condition.
To BM320 :
Connect the Cigarette Lighter to battery positive and negative position, check the LED display to
know the car battery condition.
The detailed of 6 LED Lights:
Alternator state check:
First light (red): Fault
Second light (green): Good
Third light (green): Full
Battery state check:
First light (yellow): Middle
Second light (red): Low
Third light (green): OK
Different Led display to show Battery Sate :
Display 1: All Led lights off; Testing results: none Charging Voltage, Dead Battery
Display 2:”ON” led twinkling, other Led off; Testing results:4.6-11.2V Charging Voltage, Engine being hardly turned on, turn off all electrical equipment and charge battery immediately.
Display 3: ”ON” Led ON,”LOW” Led twinkling; Testing results:11.2-11.6V Charging Voltage, Low charged Battery, being charged immediately.
Display 4:”Low” led on, ”Middle” led twinkling; Testing results: 11.6-12.2V Charging Voltage, Middle charged Battery, better being charged sooner.
Display 5: “Middle” Led on; Testing results: 12.2V Charging Voltage, Middle charged Battery, better being charged.
Display 6: “Middle” Led on, ”Full” Led twinkling; Testing results: 12.2-13.1V Charging Voltage, Middle charged Battery, better being charged.
Display 7: “Full” Led on, ”Good” Led twinkling; Testing results: 13.1-14V Charging Voltage, Good battery, Full Charged
Display 8:”Good” Led on; Testing results: 14V Charging Voltage, Good battery, Full Charged.
Display 9:”Good” Led on, “Fault” Led twinkling; Testing results: 14-16V Charging Voltage, Battery may be damaged, Check the engine and tester.
Display 10:“Fault” Led on; Testing results: Above 16V Charging Voltage, fault Battery.
BM310 / BM320 Battery tester Specification:
Color : Gray
Test Method: Positive and negative test clips
Voltage Range: 4V-12V
Material: ABS industrial material
Product Size: 4.7 inch*1.9 inch*0.7 inch
Display: Threeoolor LED light display
Weight: About 100g
The different of BM310 and BM320 :
BM310 :
Testing Clips
Used to clip on the car battery,Red clip to positive,Black clip to negative.
BM320
Cigarette Lighter
Use directly in the car to connect thecigarette lighter.No need to clip the battery, easy to operate.
Packing List :
Color Box *1
User Manual *1
Main Unit*1
Testing Clips*1
BM310 :
BM320 :
BM410 BM420 Car Battery Tester 12V & 24V
BM410 battery detector with clips, perform outside vehicle, have to open hood to test the battery condition, but in very fast respone and accurate data.
Product Details
BM410/BM420 is a portable car battery analyzer tool for daily use, perform fast and effective.
Swich to the left is Battery Load Test Mode:
-
12V Green LED: Current test battery is 12V
-
Full Green LED: Indicates that the battery is in good condition and has a good load capacity
-
Middle Yellow LED: Indicating that the battery is in very moderate condition, the carrying capacity is average
-
Low Red LED: Indicates poor battery condition and low load capacity
Swich to the right is Battery Charging Test Mode:
-
24V Red LED: Current test battery is 24V
-
Fault Red LED: Abnormal battery condition, high voltage
-
Good Green LED: Normal working voltage
-
Full Green LED: Good battery condition
-
Middle Yellow LED: Medium battery
-
Low Red LED: Low power, need to be charged
-
OK Green LED: Check before charging
12V/24V Battery Tester
For checking and testing the battery capacity, battery load capacity and the dynamo.
1) Connection:
Attch the cabla clip of the red cable to the positive(+) of the battery and the black to the negative (-).
2) Checking The Dybamo:
Connect the testing device. Start the engine and switch off the headlights, radio etc. Star the engine again and switch on the headlights, radio etc. In both cases, then green signal LED "GOOD" should shine. The red signal LED " Defective" will start to shine if the dynamo in bad condition. If the situation happen, please go to local car workshop in your earliest time.
3) Checking The Charging Level:
Switch on the headlights for 1-2 minutes, then switch off. Remove the cable clips from the battery, wait approx. 10 mins then switch the testing device on again. A signal LED will shine according to the charging status of the battery indicating " Full" " Half-full" or "Very low charge" .
4) Battery Start Capability:
The battery needs to be charged up to the maximum. Remove the connection of the ignition coil then connect the testing device. Try to start the vehicle using the key in the ignition switch. The engine cannot start (interrupted ignition). When the green signal LED "Battery OK" starts to shine, the charging status of the battery is ok.
5) Start The Battery Capability Load:
Switch to the loading test mode, then start the engine.
Full: six-five LED will be shine ;
Middle: four-three LED will be shine ;
Low: two-one LED will be shine, if no LED shine it means the battery capacity is very low, please charging the battery or change the battery.
Comment:
If the battery is not in good condition, the signal lamp "Battery OK" will start to go off and charging status of the battery LED will not loght up.
Voltage Thresholds Details:
Please check the below table for reference
The threshold might be a little different due to the different battery type, please go to professional car battery workshop for further testing if in emergency.
Packing List:
1pc * BM410/BM420 Battery Tester (Optional)
1pc * English User Manual
BM410 Display:
BM420 Display:
ATTENTION: If there is any destination tax/duties for the package, it will be on buyer's account. But we will write as low as customer's need to minimize the custom tax.
Thank you very much for your understanding!
No instruction inside, color sent by Ramdom.
OBDResource BM560 Car Battery Tester 12V 6V Analyzer 100-2000 CCA 2AH-220AH Charge Check
OBDResource BM560 Car Battery Tester 12V 6V with 1.8 inch TFT color screen, which is mainly targeted to analyze batteries healthy status to calculate the actual cold cranking, capability of batteries and the aging extent, which provide reliable analysis evidence for the test and maintenance of batteries.
OBDResource BM560 notifies the users to replace batteries in advance when batteries getting aged.
Wide Range Of Applications of OBDResource BM560 Car Battery Tester 12V 6V Analyzer
It can test 6V/12V batteries, suitable for a variety of common models and equipment, one machine for multiple purposes.
Quadruple Protection Of BM560 Car Battery Tester 12V 6V Analyzer
【Overvolatge Input Protection】Below 20V, it can be tested at will without damage the bad internal circuit board has a short circuit.
【Reversible Access】The positive and negative poles are connected incorrectly, and the device can be normal start, the device and batteries are not damaged.
【Poor Contact Prompt】When the test clip does not clamp the positive and negative electrodes of the batter, the display will prompt.
【Built-in Buzzer to Remind】During the test, when batteries are in poor condition, the device will give an audible reminder.
Does your batteries need to be replaced?
There are more and more on-board electrical appliances, and the requirements for battery capacity and quality are getting higher and higher. Can your batteries still support it?
Multiple Functions In One OBDResource BM560 Car Battery Tester 12V 6V Analyzer
The four functions can be switched at will to help you quickly detect batteries status of your vehicle.
【Batteries Test】 Life / Voltage / CCA / Internal resistance
【Start The Test】Discharge performance
【Load Test】 Engine performance
【Charging Test】 Engine charging system
Advantages of OBDResource BM560 Car Battery Tester 12V 6V Analyzer
1. Voltage Waveform Monitoring
Monitor batteries status in real time, understand the current floating size of batteries voltage, and have automatic storage and playback functions.
2. Support Multiple Battery Types - Car Battery Tester 12V 6V Analyzer
It supports a variety of battery standards around the world, can test almost all vehicle start-up lead-acid batteries, and has a wide range of applications.
●EPS lead-acid battery;
●Vehicle start battery;
●AGM / EFB start-stop battery ;
●Electric vehicle battery ;
●UPS lead-acid battery ;
●Gel battery
Note: UPS battery/electric vehicle battery/motorcycle battery can only measure internal resistance/power/voltage, not battery life.
3. Low Frequency Constant Current Test - Car Battery Tester 12V 6V Analyzer
Give the battery a fixed frequency and current test signal, sample, rectify, and filter its voltage, and then calculate the internal resistance of the battery.
4. Ten Major Test Standards：GB (2AH - 220AH )
Geometry supports all current common battery standards, and a wide range of tests can meet your various needs.
●CCA (100 - 2000 )
●IEC (100 - 1400 )
●EN (100 - 2000 )
●DIN (100 - 1400 )
●CA (100 - 2000 )
●BCI (100 - 2000 )
●MCA (100 - 2000 )
●SAE (100 - 2000 )
●GB (2AH - 220AH ) Important breakthrough
●JIS (26A17 - 245H52 )
5. HD Color Screen - Car Battery Tester 12V 6V Analyzer
High-definition TFT LCD screen display, will not appear ordinary LCD lack of characters and broken strokes, etc., with backlight function.
6. Ripple Test of OBDResource BM560 Car Battery Tester 12V 6V Analyzer
Test the charging system of the engine, the smaller the waveform fluctuation, the more stable the voltage, indicating that the battery is in good condition.
Note: If the test result is normal, the battery is charged normally.
If the voltage reading is greater than 15.0V , please check the voltage regulator; if the voltage reading is less than 13.3V, Please check the connection points, wires and engine.
7. Screenshot Function
It has a one-click screen capture function with long press "Up" and " Down" button, which is used to capture and save important data, fast and convenient. ( Note: The device can store up to 10 pictures )
8. Mini USB Interface- Free Update Lifetime
It is used for software upgrade, no need to install driver, the process is simple and easy to operate.
9. Multi-Language Available of OBDResource BM560 Car Battery Tester 12V 6V Analyzer
English French Russian German Italian Japanese Spanish Portuguese Polish Chinese
10. Use High Quality Wire
Selected high-quality environmentally friendly materials, good elasticity, not easy to break, tough and durable.
Parameter Information of OBDResource BM560 Car Battery Tester 12V 6V Analyzer
Let you quickly understand the product and use it more easily!
OBDResource BM560 Car Battery Tester 12V 6V Analyzer Details:
Exquisite industrial manufacturing, Stylish personality.
【Non-slip Design】Conducive to one-handed operation.
【Integrated Line Machine Design】The interface is stable to prevent falling off and loss, and the wire is strong and not easy to break.
【Physical Button】 Fast response and Excellent finger feeling.
【Alligator Clip】Pure copper plating, large opening range, strong bite force.
Car Battery Tester Analyzer Compare
● means support
━ means doesn't support
OBDResource BM560 Car Battery Tester Packing List:
1pc * Packaging Box
1pc * BM560 Car Battery Tester 12V 6V With Alligator Clip
1pc * English User Manual
