This nuts are a special Chrysler thread

 and are expensive and difficult to find!

This is a custom kit for
your Dodge Truck!

This is a TrueBend metal brake line replacement kit. All lines are supplied double-flared at each end with S.A.E. specified male inverted flare fittings attached and are ready for quick and easy installation. All brake lines have an extra long nut on one end to seat in late model deep-seated wheel cylinders. These malleable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid. Six couplers  and two special master cylinder nuts are included to join lines and attach parts. Instructions are also included.

The full size Dodge Truck takes 28 feet of brake line to do the entire car,
 this kit has 46 feet of lines to fit all the various configurations.
Use the extra lines for another project!

this kit is for the following:

Dodge: 
Twn and Country APV Van 1990 to 1993
Caravan Mini Ram 1984 to 1993
Dakota 1987 to 1996
Ramcharger 1/2 ton D100, D1520 W100, W150 1974 to 1996
Rampage 1982 to 1983
D200, D250, D300, D350,D400 D450 1972 to 1996
W200 W250 3/4 ton, W300, W350, W400,m B300,B350  1975 to 1996
Van B100, B150 1/2 ton 1976 to 1990
Van B200, B250 3/4 ton 1974 to 1993 

We have other kits for more models that do not need the special master cylinder nuts. 

See our other auctions for these.

rueBend® brake lines resist corrosion, vibration, fatigue and shock from impact. They are coated for corrosion protection in compliance with GM132M-ASV and SAE J527B.  Each line is manufactured by double wrapping a copper coated steel strip to form a double wall tube.  Then, the tube is furnace brazed to fuse the copper/steel tube into one continuous and seamless tube.  The tube is then given a outer coat for corrosion and abrasion resistance. These lines are the strongest and safest avai; yet can still be easily bent without kinking or without damaging the  outer coat.

This kit contains all the lines to do a wide variety of Mopar models, and many different configurations, so you will have unused lines in any installation. These extra lines are a bonus that can be used for other projects

The tubing is double walled, seamless and copper fused with a special inner and outer coating to provide protection from abrasion and corrosion. This is the same tubing that is used on new cars!

All information on lines are for OEM brake systems only. However, this kit has many lengths and will also service most modified systems also.

The lines attached to the master cylinder and brake block may be a non-standard size other than the special nuts supplied.  You may have to get an adapter at a local parts store.

If you need a very sharp bend next to the flare at the end of the line, you will need a bender listed under "tools/supplies" on our Ebay store.

All unions are solid brass to stop rust.

All lines are made in USA or Canada and are 3/16" or 1/4" outer diameter with a factory flare.

Fits following years:  1975 75 1976 76 1977 77 11978 78 1979 79 1980 80 1981 81 1982 82 1983 82 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 90 1990 91 1991 92 1992 93 1993