Wavkink 2.4G WiFi 300Mbps Outdoor AP/ Repeater/Router/ CPE/ Wireless Bridge
Stable and Long-range Wi-Fi is Provided to Wherever Needs it
Product Overview
The HighPower Wi-Fi AP/Repeater is ideal for long distance point-to-point/multi-point wireless data transmission,
providing a free Wi-Fi service in remote such as factory, community, street or etc. The AP/Repeater can take an existing 2.4GHz wireless signal,
repeat and extend it to a longer range where it is far away for the router or access point to reach, and it supports 2.4G transmission speeds of
up to 300Mbps. It has one directional flat antenna (2 x built-in 11dBi high gain antennas) providing even better wireless performance,
transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature.
Wish you'd have an enjoyable use experience with our product!
1.5km Wireless Data Transmission: Specially designed for outdoor uses, ideal for long distance wireless data transmission
over 1.5km(only for paired PtP or PtMP transmission), tested in the barrier-free field. Built-in 11dBi directional antennas can
significantly improve the transmission and reception performance of wireless signal.
Excellent WiFi Access "Helper": It supports up to 64 devices and provides 300Mbps high speed with 100M Ethernet port and
2*2 MIMO antenna. Point to Point/Multi-Point connection (1-4) can be used for elevator monitor/surveillance networks.
Simple settings can achieve wireless optimization, and improve the quality and effectiveness of link transmission.
Built for Outdoor Wi-Fi Coverage: IP65-rated waterproof housing that ensures continued operation on harsh outdoor environments
or in climates of extreme cold, heat or continuous moisture. Lightning protection and weatheproof design ensure stable connection
in harsh outdoor conditions. Note: The PoE part of the router is not waterproof.
Flexible Deployment：24V passive PoE adapter supports up to 80 meter (262 feet) deployment, for easier installation and lower cost.
And it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Multi-Working Modes Accessible: Supports AP/Router/Repeater Mode, which can meet your network requirements in different environment.
200 meters wireless data transmission range specifically determined by the environment and the antenna gain and power of the client.
Specifications:
- Easy installation, flexible placement
- Supports Router, AP, Repeater modes
- High transmission power for 1500 meters extreme Wi-Fi coverage
- Features 2 x RP-SMA connectors for external antennas
- Robust weatherproof enclosure design, 15KV ESD and 4KV Lightning Protection
- Supports passive PoE power supply(through network cable)up to 80 meters
- Complies with IEEE 802.11b/g/n standards, wireless speed up to 300 Mbps
- Supports 128 bit WPA/WPA2(TKIP/AES)
- Features 6 x status LED indicators
What You Get:
1x Outdoor Wi-Fi range extender;
1x Directional antenna panel;
1x Main body holder;
1x PoE converter;
1x RJ-45 network cable;
1x Screw/Bracket fitting kit;
1x Power adapter;
2x Cable ties;
1x Quick start guide;
1xInstallation instruction.
Installation Instruction
Installation Height: Keep the height of the flat antenna 2-3 meters above the ground without obstruction,
and 1-2 meters horizontal drop from the network terminal (mobile phone, surveillance camera).
Installation Direction: The signal facing the front of the panel antenna is much stronger, please pay attention to whether
the front and back of the antenna panel are facing correctly when installing.
Installation Steps: Support flexible deployment on the wall or on the round pole. For detailed steps, please refer to our step-by-step
diagrams in this page or installation instructions in the package.
Please Note:
* The real performance of the product may vary in accordance with different environmental conditions.
* If your device is damaged or defective, please contact our customer service for more details.
* All pictures shown on the package are for illustration purpose only.
* The PoE part of the router is not waterproof.
FAQ
Q1. Why doesn't the login page appear after entering wifi. wav link .com?
-If your computer is wirelessly connected, please verify that you have connected to the device's SSID.
If your computer is connected via an Ethernet cable, please verify that the connection is stable.
-Make sure your computer is set to obtain an IP address automatically.
-Use the IP address to log in to the page. The default IP is 192.168.10.1. If the device is connected to the host Wi-Fi,
please go to the router 's DHCP client list to obtain the device' s current IP address.
-Please reset the device and try again. If the problem still exists, please feel free to let us know.
Q2. How do I restore the device to its factory default settings?
-While the device is powered on, press and hold the Reset button until all the LEDs turn on momentarily.
Q3. What should I do if the LED does not change to solid after completing ?
-You may have entered the incorrect Wi-Fi password of your host Wi-Fi during the configuration.
Please log into the device' s web-based interface to check the password and try again.
-Reset the device and go through the configuration again.
Q4. I have enabled a wireless MAC filter, wireless access control, or access control list (ACL) on my router.
What should I do before configuring and using the device ?
-If you have enabled those functions of your router, you may need to disable them first. And then follow OPTION ONE
or OPTION TWO to complete the configuration. For more details, please refer to wavlink.com.
