Item description

TYAN Thunder K8SRE S2891

    TYAN Thunder K8SRE S2891

  • Specifications
  • Processor
  • • Dual µPGA 940-pin ZIF sockets
  • • Two onboard 4-phase VRM
  • • Supports up to two AMD Opteron™ 200 processors
  • • Three HyperTransport™ links support up to
  • 8.0GB/s data transfer rate each link
  • • 144-bit DDR interface (128-bit data + 16 bit ECC)
  • • Scalable 32bit & 64bit computing
  • • Secure computing with Nx register support
  • • Supports Single and Dual Core processors
  • Chipset
  • • AMD-8131™ HyperTransport™ PCI-X Tunnel
  • • Nvidia nForce™ Prof. 2200 (CrushK8-04 Pro)
  • • Winbond™ W83627HF Super I/O ASIC
  • • Analog Devices ADT7463 Hardware Monitoring IC
  • Memory
  • • 128-bit dual channel (interleaved) memory bus
  • • Total eight DDR DIMM sockets (four per CPU)
  • • Supports up to 32GB of Registered DDR
  • • Supports Single/Dual/Quad Rank mem. modules
  • • Supports DDR 266/333/400 memory
  • • Supports ECC with CHIPKILL Technology
  • Expansion Slots
  • • One PCI Express x16 slot with 1U riser support:
  • - Other riser solutions in development
  • • One Tyan TARO SO-DIMM 100MHz (PCI-X B)
  • • One PCI-X 100MHz slot (Bridge B)
  • • Total of three usable slots
  • * NOTE: Use of PCIe x16 riser is necessary for installation of PCIe x16 add-on cards! See this matrix for details: Tyan Riser Card Matrix
  • Integrated I/O
  • • One floppy connector
  • • One parallel port header and two serial
  • (one connector, one header)
  • • Six USB 2.0 ports
  • (two rear connector & four front panel headers)
  • • One 15-pin VGA connector
  • • PS/2 mouse and keyboard connectors
  • System Management
  • • Total of ten 3-pin fan headers with PWM support
  • • Seven fan headers with tachometer
  • (four from ADT7463 three from W83627HF)
  • • One 2-pin Chassis Intrusion header
  • • Temperature, voltage and fan monitoring
  • • Port 80h LED 7-segment display
  • Integrated LAN Controller
  • • One Broadcom BCM5704 dual port GbE LAN
  • - Two RJ-45 LAN connectors with LEDs
  • - Connected to PCI-X Bridge A (133MHz)
  • • Two Front Panel LED headers
  • Integrated PCI Graphics
  • • ATI® RAGE™ XL 8MB PCI graphics controller
  • Integrated Enhanced IDE Controller
  • • Two IDE ports for up to four EIDE devices
  • • Supports ATA-133 IDE drives & ATAPI devices
  • Integrated Sata Controller
  • • Two integrated dual port SATA-II controllers
  • • Four SATA-II ports support up to four drives
  • • Supports 3.0Gb/s per port; Raid 0, 1,


 

Satisfaction guarantee

Our products are carefully packed and insured for the time of a journey!

Payment Methods

Your order in 4 easy steps

We are responsible for successful shopping!

This graphic design is wholly owned by aPRESS24. Reproduction, photocopying, distribution or otherwise using materials in any of the fields of use without the written permission of aPRESS24 is prohibited. In case of violation of the aforementioned. We reserve the right to enforce any claim under applicable law. When you purchase at our auctions, you accept the terms and conditions.

• Supports up to two AMD Opteron™ 200 processors • 144-bit DDR interface (128-bit data + 16 bit ECC) • Analog Devices ADT7463 Hardware Monitoring IC • One PCI Express x16 slot with 1U riser support: * NOTE: Use of PCIe x16 riser is necessary for installation of PCIe x16 add-on cards! See this matrix for details: Tyan Riser Card Matrix • Total of ten 3-pin fan headers with PWM support Our products are carefully packed and insured for the time of a journey! This graphic design is wholly owned by aPRESS24. Reproduction, photocopying, distribution or otherwise using materials in any of the fields of use without the written permission of aPRESS24 is prohibited. In case of violation of the aforementioned. We reserve the right to enforce any claim under applicable law. When you purchase at our au
• Supports up to two AMD Opteron™ 200 processors • 144-bit DDR interface (128-bit data + 16 bit ECC) • Analog Devices ADT7463 Hardware Monitoring IC • One PCI Express x16 slot with 1U riser support: * NOTE: Use of PCIe x16 riser is necessary for installation of PCIe x16 add-on cards! See this matrix for details: Tyan Riser Card Matrix • Total of ten 3-pin fan headers with PWM support Our products are carefully packed and insured for the time of a journey! This graphic design is wholly owned by aPRESS24. Reproduction, photocopying, distribution or otherwise using materials in any of the fields of use without the written permission of aPRESS24 is prohibited. In case of violation of the aforementioned. We reserve the right to enforce any claim under applicable law. When you purchase at our au
• Supports up to two AMD Opteron™ 200 processors • 144-bit DDR interface (128-bit data + 16 bit ECC) • Analog Devices ADT7463 Hardware Monitoring IC • One PCI Express x16 slot with 1U riser support: * NOTE: Use of PCIe x16 riser is necessary for installation of PCIe x16 add-on cards! See this matrix for details: Tyan Riser Card Matrix • Total of ten 3-pin fan headers with PWM support Our products are carefully packed and insured for the time of a journey! This graphic design is wholly owned by aPRESS24. Reproduction, photocopying, distribution or otherwise using materials in any of the fields of use without the written permission of aPRESS24 is prohibited. In case of violation of the aforementioned. We reserve the right to enforce any claim under applicable law. When you purchase at our au