Ancel TD700 OBD2 Scanner All System Fit For TOYOTA CAMRY LEXUS COROLLA Reader
 
 

 

Ancel TD700 fit for Toyota Vehicles Features
1. Professional OE-level full system diagnosis fit for Toyota serial Vehicles after 2001 and up ,such a fit for TOYOTA ,fit for Camry ,fit for LEXUS,fit for  SCION,fit for  Prius ,fit for Corolla ,fit for 4runner etc .
2. Support 10+ Special functions & Full OBDII Functions;
3. Compatible with Toyota SUVs, minivans, light-duty trucks sold worldwide. 
4. Reads and clears codes and turns off the warning indicator.   Accesses and records live sensor data. 
5. Provides live data graphing. 
6. Merges graphs fit for easy and intuitive diagnosis. 
7. Retrieves ECU information. 
8. Auto VIN &DTC Lookup, O2 sensor test, component test. 
9.  Enhanced OBDII Mode 6 functionality. 
10. Lifetime free update !
11. Multilingual menu options and code definitions. 

 
ALL SYSTEM DIAGNOSTIC FOR TOYOTA VEHICLES
- Engine System: It supports full modes OBDII functions. Easily identify car problems and turn off engine lights. Help you pass emissions test and keep your car in best condition. Save gas and improve performance.
- Transmission System: It can help before transmission problems become a big hassle. That's because most trouble codes come from your vehicle's transmission. With a transmission diagnostic tool, you can get a fault code if there is one.
- SRS Ai/rbag System:The SRS (Supplemental Restraint System) is a device that deploys the airbag to protect the passenger before the second collision occurs. TheTD700 OBD2 scanner can read/clear the code and turn off the airbag warning light.
- ABS System: ABS automatically controls the braking force of the brake when the car brakes, so that the wheels do not lock and enter the state of edge rolling slip (slip rate is about 20%) to ensure the maximum grip between wheels and ground.
- Battery System: TheTD700 allows the scan tool to evaluate the battery charge level, monitor the short circuit current, register the battery change, activate the vehicle hibernation mode and charge the battery via the diagnostic socket.
- TPMS System: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
- Steering Angle Sensor (SAS) System: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
- A/C (Air Conditioner) System: this function supports routine maintenance of air condition modules, for example, air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization

 

10+ Special Functions Fits for Toyota 

Service reset

Throttle Learning

EPB replace Brake pads

Steering angle learning

Tire pressure reset (TPMS)

Battery registration

 Oil Reset: When the service lamp on the instrument cluster is up, changed the oil, then turn off the oil light and reset the service mileage.

EPB Reset: It performs the maintenance of electronic parking brake systems. The brake pad reset is required to turn the MIL off after replace the brake pad.

TPMS Reset: The tire pressure monitoring system can perform real-time automatic monitoring of various tire conditions. When the tire pressure is insufficient, need to perform tire pressure reset after replace the tire or sensors.

SAS Calibration: The steering angle sensor is used to detect the rotation angle of the steering wheel. This function performs calibration for the steering angle sensor to clear fault memories of the steering angle sensor.

ABS Bleeding: When the ABS contains air, the ABS bleeding function is required to bleed the brake system to get a firm brake pad.

Injector Coding: Write the new injector code to the ECU after replacement of injector so that the cylinder can identify the new injectors to lower fuel emissions. 

⚠️ Note: Doesn't fit for all car models , Please send us the VIN number and the functions you need to check compatibility. 

 
All OBDII/EOBD Functions
Mode 01 --- Request current powertrain diagnostic data.
Mode 02 --- Request freeze frame information.
Mode 03 --- Request emissions-related diagnostic code.
Mode 04 --- Clear/reset emissions-related diagnostic information.
Mode 05 --- Request oxygen sensor monitoring test results.
Mode 06 --- Request on-board monitoring test results for specific monitored systems.
Mode 07 --- Request emission-related diagnostic trouble codes detected during current or last completed driving cycle.
Mode 08 --- Request control of on-board system, test or component.
Mode 09 --- Request vehicle information.
Mode 0A --- Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information.
 

Other Features

Live Data in Graph
This professional scan tool displays and records real-time PID data from a selected vehicle electronic control module which typically include:

Lifetime Free Update
To fix the latest bugs or add newer parameters, update your scanner is necessary, please follow the three steps as below

Automatically Search
LD700 automotive scanner has come with an auto VIN detection, you can get a clear detection with only 5 seconds at your home. It will offers full system diagnosis and comprehensive codes after finishing scanning and detection. So, say goodbye to your long time waiting for the workshop to detect the DTCS. In addition, please do not forget you can also always manually input the vehicle info to diagnosis.
    
Plug and Play
Equipped with 2.8'' full-color screen, handy size, clearly arranged keypad and flexible hotkeys, you can also switch between two skin style smoothly. Most importantly, it can support one-click reading DTCs and one-click I/M readiness monitor, make LD700 code reader extremely easy to use. Plug and play, no training request!
    
Save Time and Money
The professional OBDII scanner comes with Toyota diagnostic software with free access for a lifetime. This also means that you are one click away from online updates.  

 
 
PRODUCT DESCRIPTION
Display: 2.8″ TFT LCD, 320X240 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage:8V-18V
Operating Temperature:0C-60C(32-140F)
Storage Temperature:-20℃-70℃(4-158F)
Dimension: 6.8*3.38*1.22 inches (L x W x H)
Package List
1*TD700 OBD2 Scanner
1* USB cable
1*User's Manual
 
 
 
 
 
 
 

 

 

PushAuction

DataCaciques