DMX512 8PCS 1*Sender 7*Empfänger Kit 2.4G ISM Wireless für Bühne Lichteffekte

Please Note ：

This DMX512 all need to connect Power Adapter Plug to work , NOT Battery type !!!

Package include:

*1 Transmitter with 1adapter

*7 Receiver with 7 adapter

*User manual

Do you like holding party but is annoyed by winding wire? This wireless transmitter and the receivers will help you to get rid of the trouble.

Just plug the transmitter into stage lamp console, plug the receivers into stage lamp and you will be free to control stage lamp without wire.

Features:

Specification:

DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by

console) by wireless way.No time delay when signal data is transmitting, signal data is real time

and reliably.This product adopts a 2.4G ISM frequency section.High effective GFSK

modulate,communication design; 126 channels jumping frequency automatically, high anti[1]jamming ability.

1. 2.4G wireless DMX512 R/T

2. 126 channels jumping frequency automatically, high anti-jamming ability. to ensure works

reliability

3. 7 groups ID code settable,User can use 7 groups individual wireless net without any interfere

4. each other in the same place...(Tricolor LED displaying Indicators)

5. Input voltage:5VDC 500mA MIN

6. Communication distance: 400M (visible distance)

7. Work frequency section: 2.4G ISM,126 channels.frequency section

8. Max transmitting power rate:20dBm

Operating manual：

ID code and LED color corresponding relationship：

1：RED

2：GREEN

3：RED+GREEN

4：BLUE

5：RED+BLUE

6：GREEN+BLUE

7：RED+GREEN+BLUE

1. Press momentary switch above the side led indicator to indicate ID setting

2. Press again to set IC，to the color ID desired,adding 1 each time you press the switch will

advance the color ID code.

3. Working condition：

LED constant lit up：No DMX or wireless signal.

Red LED flash：Transmitting.

Green LED flash：receiving

4. RF frequency 2.400 - 2.525G，total 126 channels，it's searching automatically,

5. ID Code “1-7” groups ID code，press 'KEY' for setting，it only can work under same ID code of

transmitter and receiver. (Same LED Color)

Operating manual：

Establishing Communication：

1. Power on DMX512 wireless received board first and then following to power up the

transmitted boards.

2. Press “Key” button to set same ID value of transmitted board and received board. Please

use different ID value if you need use more than 1 group wireless universals at same time in

same place.

3. The red LED flashes when transmitter transmits DMX data by no interfered frequency

section, then receiver changes communicated frequency section. Green LED flash till

received corrected same ID value, LED flash more fast once DMX data more fast.

4. Communication was established correctly.

Please note some DMX fixtures need to be placed into slave mode for proper DMX control. If

in the master mode they will send a DMX signal out the xlr jacks causing the auto scan

transmitter/receivers to go into a transmitter mode due to the dmx signal being present.

This unit is for Indoor use only