Product Overview

WIFI Bluetooth Development Board ESP32-CAM OV2640 Camera Module USB/ Type-C

 
ESP32-CAM OV2640 Board
Features:
Low-power dual-core 32-bit CPU for application processors.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB SRAM, external 4M PSRAM.
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support image WiFi upload.
Support TF card.
Support multiple sleep modes.
Embedded Lwip and Free RTOS.
Support STA/AP/STA+AP working mode.
Support Smart Config/AirKiss one-click distribution network.
Support secondary development.
Specification:
Voltage: 5V
Current: 2A
Dimensions: 2.7x4cm/1.06x1.57inch
Color: As shown
Quantity: 1Pc
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:1 x Development Board
ESP32-CAM OV2640 Type-C Board
Features:
ESP32 specifications
Dual-core Tensilica LX6 microprocessor
Up to 240 mhz clock frequency
520kB internal SRAM
4 mb of Flash memory
Integrated 802.11 BGN WiFi transceiver
Integrated dual-mode Bluetooth (classic and BLE)
Hardware and accelerated cryptographic tools (AES, SHA2, ECC, RSA-4096)
CP2104 USB TTL
OV2640 sensor
Output Formats (8-bit):
YUV (422/420) / YCbCr422
RGB565 / 555
8-bit compressed data
8- / 10-bit Raw RGB data
Maximum Image Transfer Speed
UXGA / SXGA: 15fps
SVGA: 30fps
CIF: 60fps
Scan mode: Progressive
Camera technical features
CCD format: 1/4 inch
Field of View: 78 degrees
Maxmium Pixel: 200W
Best resolution sensor: 1600 * 1200
Size: 25mm x 24mm
Package included: 1 x ESP32-CAM Module OV2640 Camera Module Development Board ESP32
ESP32-CAM Enhanced Version + OV2640 Camera
Product Introduction
The ESP32-CAM enhanced version is a camera module with an external 8dBm high-gain dual-band antenna based on the original ESP32-CAM. The wireless communication distance is greatly improved, and the quality of the model is improved. The module can work independently as the smallest system, with a size of only 27*40.5*4.5mm, and a deep sleep current as low as 6mA. ESP32-CAM can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications. ESP32-CAM adopts DIP package and can be used directly by plugging in the bottom plate, realizing the rapid production of products, providing customers with high-reliability connection methods, and being convenient to apply to various IoT hardware terminal occasions. Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.

Product Features

1.Using low-power dual-core 32-bit CPU, can be used as an application processor;

2.Main frequency up to 240MHz, computing power up to 600 DMIPS;
3.Built-in 520 KB SRAM, external 4M PSRAM;
4.Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces;
5.Support OV2640 and OV7670 cameras, built-in flash;
6.Support picture WiFI upload;
7.Support TF card;
8.Support multiple sleep modes;
9.Embedded Lwip and FreeRTOS;
10.Support STA/AP/STA+AP working mode;
11.Support Smart Config/AirKiss one-click network configuration;
12.Support secondary development.
Product parameter
Module type: ESP32-CAM Enhanced Version
Product Size: 27*40.5*4.5(±0.2)mm
SPI Flash: 32Mbit
RAM: internal 520kb + external 4M PSRAM
Bluetooth Version: Bluetooth V4.2 BR/EDR And BLE Standard
WI-FI: 802.11 b/g/n/e/i
Supported interface: UART, SPI, I2C, PWM
Supported TF card: Max. 4GB
Serial port rate: 115200bps
Image output format: JPEG(Only OV260 Support), BMP, GRAYSCALE
Frequency Range: 2412-2484MHZ
Antenna form: External sword-shaped dual-band antenna interface, 8dbi
Transmit Frequency:802.11b:17±2 dBm(@11Mbps)
                                 802.11g:14±2 dBm(@54Mbps)
                                 802.11n:13±2 dBm(@MCS7)
Receiving sensitivity: CCK, 1 Mbps: -90dBm
                                    CCK, 11 Mbps: -85dBm
                                    6 Mbps(1/2 BPSK ): -88dBm
                                    54 (3/4 64-QAM): -70MbpsdBm
                                    MCS7(65 Mbps, 72.2 Mbps):-67dBm
Power consumption：Turn off the flash:180mA@5V
                                    Turn off the flash Maximum brightness: 310mA@5V
                                    Deep-sleep: Minimum 6mA@5V
                                    Modem-sleep:20mA@5V Minimum
                                    Light-sleep: Minimum6.7mA@5V 
Security: WPA/WPAWPA2-Enterprise/WPS
Power supply: 5V
Working temperature range:-20℃-85℃
Storage environment：-40℃-90℃, <90%RH
Application scenario
1.Home smart device image transmission.
2.Wireless monitoring.
3.Smart agriculture.
4.QR wireless recognition.
5.DIY wireless image transmission, etc.

Package include:1x ESP32-CAM enhanced version With OV2640 Camera and antenna

 

ESP32-CAM-MB CH340G +OV2640 Camera

 

 

Introduction：
    The ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
    HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
Basic performance parameters
1. Use low-power dual-core 32-bit CPU, which can be used as an application processor.
2. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS
3. Built-in 520 KB SRAM, external 8MB PSRAM
4.  Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces
5. Support OV2640 and OV7670 cameras, built-in flash
6. Support picture WiFI upload
7. Support TF card
8. Support multiple sleep modes.
9. Embedded Lwip and FreeRTOS
10. Support STA/AP/STA+AP working mode
11. Support Smart Config/AirKiss one-click network configuration
12. Support secondary development
Application scenarios
1. Home smart device image transmission
2. Wireless monitoring
3. Smart agriculture
4. QR wireless recognition
5. Wireless positioning system signal
6. And other IoT applications
 
Package Include:1x ESP32-CAM-MB 5V WIFI Bluetooth Development Board USB CH340G
 
OV2640 Camera
Feature:
The OV2640 image sensor features 2 megapixels (1632x1232 pixels)
Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
The product UXGA images up to 15 frames per second.
The user can fully control the image quality, data format and transmission mode.

Specification:
High sensitivity for low-light applications
Low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
Supports VarioPixel sub sampling mode
Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP with noise cancellation and dead pixel compensation
Support image scaling
Lens loss compensation
Saturation automatic adjustment
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Sensing array: 1632x1232
Maximum format: UXGA IO
Voltage: 1.7V -3.3V
Analog voltage: 2.5 -3.0V (internal LDO to power supply 1.2V)
Power consumption TBD sleep: <20μA
Temperature operation: -30°C to 70°C
Stable working: 0°C to 50°C
Output format (8-bit)
YUV / YCbCr4: 2: 2 RGB565 / 555/444
GRB4: 2: 2 Raw RGB Data
Optical size: 1/4"
Viewing angle: 25 Degree
Maximum rate: 15fps
SXGA sensitivity: 1.3V / (Lux-sec )
Signal to noise ratio: 40dB
Dynamic range: 50 dB
View mode Progressive electron exposure 1 line to 1247 lines
Pixel area: 2.2 μm x 2.2 μm
Dark current: 15 mV/s at 60°C

Package Included:
1 x OV2640 2.0 MP Mega Pixels 1/4'' CMOS Image Sensor SCCB Interface Camera Module

 

 

 ESP32-CAM-Integrated CH340

 

Introduction (1)

ESP32-CAM-Integrated CH340 WIFI Bluetooth development board OV2640 camera module Support manual and automatic download MICRO USB interface USB to serial port CH340
Product name: ESP32-CAM-CH340 camera module
Product model: HW-818
Working voltage: DC5V
Product size: 27*48.5*4.5mm (excluding pin header)
Product application: This module can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It adopts DIP package and can be used directly by plugging in the bottom plate.

 


 

Introduction (two)
Program download
1. Download the software and set it up, select the program or burn the file
2. The module presses the FLASH button (to keep pressing), and then connect the module through the USB cable
MICROUSB port and computer USB port.
3. To download the software, select the correct download port and download it. When the program starts to download, you can release the FLASH button

Package Include:

1x ESP32-CAM-CH340 USB WIFI Bluetooth Development Board OV2640 Camera Module DIY

1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 30 days,please keep in touch with us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
 
ShenZhen

1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment

 

1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!

On Jun 9, 2022 at 19:51:08 PDT, seller added the following information:

DataCaciques

On Apr 3, 2023 at 00:10:38 PDT, seller added the following information:

DataCaciques

On Jul 12, 2023 at 20:12:22 PDT, seller added the following information:

DataCaciques

On Aug 15, 2023 at 05:52:25 PDT, seller added the following information:

DataCaciques