M-AUDIO BX6 CARBON STUDIO MONITORS for professional use. Immaculate conditions. They come with their audio interface + pair stands with adjustable height (73cm to 180cm), floor spikes and cable clips, and with the audio interface to which is possible to connect instrument, headphones or adaptor. 2 x Audio jack 3 metres long best quality. Everything is included in pictures.
Also 4x fuses included in case of emergency.
Specifications:
Type: 2-way near-field studio reference monitors
LF Driver: 6-inch (153mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded.
HF Driver: 1.25-inch (32mm) magnetically shielded natural silk dome
Frequency Response: 45 Hz – 22 kHz
Crossover Frequency: 2.5 kHz
LF Amplifier Power: 70 W
HF Amplifier Power: 60 W
Signal-to-Noise Ratio: 100 dB typical A-weighted
Input Connectors:
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
Polarity: Positive signal at + input produce outward LF cone displacement
Input Impedance: 20 KO balanced, 10 KO unbalanced
Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse.
Indicator: Power on/off indicator on rear panel
Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
Dimension (height x width x depth): 12.5”x 8.4” x 9.8” (318mm x 213mm x 249mm)
Weight (without packing): 16 lbs, 7.5 kg