Specifications
Material: EVA foam
Color: Teak brown with black bevel groove
Strong self-adhesive glue at the back
Length:2400mm/94.5inch
Width: 900mm/35.4inch
Thickness:5.5mm-6mm/0.22inch-0.24inch
(A deviation of 0.5mm is possible due to manual measurement)
Features
1.High-quality EVA(Ethylene-vinyl Acetate) environmental protection materials.
2.With backing adhesive,very easy to install.Easy DIY cutting,everyone is a master.
3.UV protection, not easy to aging, not easy to fade, almost no maintenance.
4.Low heat transfer, making the deck temperature unaffected by harsh environments, making you more comfortable.
5.Closed cell structure, non-absorbent, moisture-proof, good water resistance.
6.Patented beveled design, CNC-like cutting, easy to clean than normal straight edges.
7.Not easy to slip.
8.Elastic, not easy deformation.
9.High tensile elongation, not easy to tear. Elongation and rebound will perform better than other materials.
10.High Density, not easy to damage.
11.Odourless, non-toxic.
12.Stain resistant & very easy to maintain, can also be pressure washed.
13.Resistant to seawater, grease, acid, alkali and other chemicals corrosion.
14.Perfectly decorate your boat.always shows your charming and highlight your boat.
15.This boat marine flooring mat is suitable for yacht flooring,boat flooring,RV flooring,car flooring,swimming pool flooring,garden flooring and other decoration.
Installation requirements：
1.Make sure the surface is clean and dry.It's better to fill in structural adhesive making the surface smooth,such as"Flex Seal".
2.Please doing a trial fitting before gluing down. Once you glue it you can't unglue it.Check whether the colors matched.
3.The product is rolled tightly for shipping. Don't tempting to unroll it and allow it to flatten out unless you start paving it, it will cause the EVA peel-off backing to separate from the adhesive and the adhesive will dry out.
4.The edges should be sealed with silicone rubber sealant (sikaflex) to prevent water and debris from getting underneath.