3Pcs CDM Ignition Coil Mercury 30-300HP Outboard Motor 827509A10 114-7509 Force
This CDM Module replaces all 827509A1, 827509A3, 827509A7, 827509A9, 827509A10 and 827509T4 series CDM Modules
For Mercury (96-07, 30-300HP), Force (96-99, 40-120HP)

Mercury Ignition coil 
package includes：3PCS
Connector: 4 pins  

Replaces Part numbers：
114-7509           827509A1         
827509A3         827509A4         
827509A7         827509A8          
827509A9         827509A10          
827509T7         AMW-3454

Fitment:
MERCURY (1996-2007 (30-300HP)
FORCE (1996-1999 (40,50,75,90 & 120HP)

FEATURE：
EASY INSTALLATION, GOOD WORKING CONDITION.
STABLE CHARACTERISTICS, HIGH RELIABILITY.
PERFECTLY REPLACE FACTORY OEM PARTS.

Product:
Chrysler, Force, Gamefisher, Mercury, CDM Module 2/3/4/6 Cyl  

How to install ignition CDM module 114-7509?
1. Disconnect and clean all engine and battery ground wires
2. Disconnect the old CDM Module and remove the high tension coil wire from the spark plug
3. Unbolt and remove the old CDM Module. (Note the direction of the spark plug wire)
4. Check for dc voltage on the kill (stop) wires (usually black/Yellow) with the key switch in the on and off position.
5. Apply a slight amount of dielectric grease to the seal area of the wire connector from the engine harness
6. Apply a slight amount of dielectric grease to the outside of the new spark plug wire and thread the spark plug wire into the new CDM Mod
7. Bolt the new CDM Module onto the engine(orient the new CDM Module so that the spark plug wire is pointed in the same direction as the original)
8. Plug in the connector from the wire harness into the new CDM Module and connect the spark plug wire to the spark plug

                                                                                 

Please try to confirm your needs before placing a purchase order. Thanks.
For example:
- Vehicle Model
- Vehicle year
- The function of the product
- Time of receiving the product
- Material of the product
- Adaptability of the product
- Color of the product
......
If you have any questions, please contact us.
We take responsibility for our products.

Please contact us first when you have a problem with the product.
We will be responsible for the product.
Thank you for your understanding. 
After confirming that the following conditions are true: (please try to provide photos or other proof)
1. Product transportation damage: partial/full refund
2. Product lost in transit: full refund.
3. Item not delivered: full refund.
4. Product error: return the product for a refund
5. Not as described or pictured: return for a refund
6. Size does not fit: return for a refund
7. Unusable or defective: return for a refund
......
- If you have any questions, please contact us on eBay and we will reply within 24 hours every day (Including Holidays)
- If you have any questions, please contact us first.
Thanks.
- Please do not open disputes and requests.
- Please do not leave negative comments.
PushAuction