XXL Size Air Compression Leg Massage Pressotheray Recovery Boot Sequential Compression Device Blood Circulation Machine for Legs











































Working Principle Of The Product:

The product is an inflatable and deflating system formed by controlling the main engine and limb sleeve (air bag), The working mode, working pressure, working time and other parameters of the instrument are set by human-machine interface. The air bags in each chamber are controlled by embedded system (wavy inflating, holding and deflating) to exert periodic pressure on human peripheral blood and tissues, Passive Uniform Massage with Direction and Graduality.Used for health care and to compensate for inadequate exercise.

Features:

1. Large screen and LED digital display for control machine.
2. Powerful and dynamic air pressure massage.
3. Six output channels can connect each 6-air-bag cuffs.
4. Time setting function: time setting for massaging from 0-60 minutes.
5. Cuffs use high density TPU, good airproof.
6. Optional our massage modes, among them, mode D is pulse massage.
7. Frequent use can promote blood circulation, eliminate edema, relieve fatigue, prevent thrombosis and varices, improve incretion and immunity.
8. Quick connector to machine, easy on/ off from machine.

9. Pressure : 30mmHg-260mmHg adjustable

Specifications:

1)Pressure range: The range of pressure is 30 mmHg (3.99 kPa) - 260 mmHg (34.66 kPa) adjustable. Step 5 mmHg (0.666 kPa)
2)Overvoltage protection: The maximum working pressure should not exceed 10% of the maximum pressure in 20S.
3) Time: Timing adjustment in the range of 10 to 90 minutes. Step for 1 minute
4) Working noise: Normal working noise≤60dB(A)
5) Product input power: 29.7W
6)Power supply conditions: a.c.100-240V,50-60Hz output d.c.12.6V/4A
7) Functional switch: The device has a stop function switch, which can stop the treatment procedure at any time.
8)Product Output Channel Mode: Six Output Channels and Four Pressure Modes, See this manual for details.
9) The function of cavity closure: Any cavity can be set to open or close.
10) Normal working conditions：Ambient temperature: 5℃～40℃; relative humidity: ≤85%; atmospheric pressure: 80kPa～106kPa.
11)Net weight of product mainframe：1.35kg
12) Instrument size (length * width * height): 210mm*130mm*86mm
13) Product packaging size (length * width * height)：37.5cm*31.5cm*22cm

The gasket can be replaced

If you find the air boot cannot be pumped, please check if the sealing gasket is taking off or not.