Product name: AC synchronous motor
Model: 49KTYZ
Voltage AC: 220V
Speed: 2.5-30 rpm
Power: 4W
Motor size: 49 * 21 MM
Output shaft size: 7 * 15.5MM
Speed regulation: No speed regulation
Forward and backward: Random forward and backward
Weight: 110g
Product features: The product has characteristics such as small size, low temperature rise, low noise, and long service life. It is a controllable forward and backward synchronous motor that combines permanent magnet synchronous motors and reduction mechanisms. With low power consumption and high torque
The characteristics of low noise, small size, light weight, and convenient use. At rated frequency, the motor speed is not affected by voltage and remains constant.
49KTYZ claw pole synchronous motor is mainly used in handicraft flow painting, automatic instruments, fans, Space heater, air conditioners, microwave ovens, rotary lamps, curtain machines, rotary antennas, fans, handicrafts, stage lighting, microwave ovens, optical fiber Christmas lights, optical fiber flowers, dance table lamps, seascape lights and other craft gifts, Hongyun fans, electric fan shaking heads, quartz Space heater, air conditioners, curtain machines, ice cream machines, rotary Television antenna Rotating lamps, Stage lighting, electric tables, electric models, electric posters, electric shelves, automatic turntables, dishwashers, scientific and educational instruments, medical equipment and automatic instruments, etc.
Precautions for motor use
1. Before use, confirm that the motor voltage is correct. If it is a DC motor, also confirm whether the power current is sufficient
2. Overloading is not allowed. The reasons for overload are mainly divided into two parts: torque and shaft force. The load torque should not exceed the motor
The rated torque of the shaft should not exceed the axial and radial allowable force of the shaft. After adding a load, the measured current of the motor should not exceed the rated current. Generally, the motor must be equipped with a fuse to avoid overload and burning the motor
3. Do not store or operate in high temperature or humid environments, and do not place it in corrosive gas as it may reduce the effectiveness of the motor
4. When assembling transmission components such as gears and pulleys on the motor shaft, do not strike them abnormally when pressing them in
5. When soldering the motor terminals of the positive and negative poles of the power supply, the soldering iron temperature should be 340C+4C, and the heating time should not exceed 3 seconds to deform the plastic. During operation, let the soldering points flow into the motor or break the end of the wire, which will cause the motor's function to decline
6. When installing the motor, pay attention to whether the screws are too long to prevent them from colliding with the parts inside the motor