| basic function |
VICTOR 1050S |
VICTOR 1100S |
| Bandwidth |
50MHz |
100MHz |
| Real time sampling rate |
500MS/s |
1GS/s |
| Time base range (s/div) |
5ns/div - 1000s/div, step by 1 - 2 - 5 |
| Rise time (typical value on BNC) |
≤3.5ns |
| Channel |
2 |
| Display |
7-inch TFT (True Color) LCD screen, 65535 colors, 800 × 480 pixels |
| Input impedance |
1M Ω ± 2%, parallel to 20pF ± 5pF |
| Isolation between channels |
50Hz : 100 : 1, 10MHz : 40 : 1 |
| Maximum input voltage |
400V (PK - PK) (DC+AC, PK - PK) |
| DC gain accuracy |
±3% |
| Storage depth |
10K |
| DC accuracy (average) |
Average≥16：±(3% reading + 0.05 div) for △V |
| Probe attenuation coefficient |
1X, 10X, 100X, 1000X |
| Low frequency response (AC coupling, -3dB) |
≥ 10Hz (at BNC, -3dB) |
| Frequency stability |
±100ppm |
| waveform interpolation |
sin (x) / x |
| Time interval (△ T) measurement accuracy |
Single time: ± (1 sampling interval+100ppm x reading+0.6ns), |
| Average>16: ± (1 sampling interval time+100ppm x reading+0.4ns) |
| Input coupling |
DC, AC , GND |
| Vertical accuracy (A/D) |
8 bits, two channels simultaneously sampling |
| Vertical sensitivity |
5mV/div - 5V/div (at input) |
| Trigger |
Edge, Video |
| Trigger method |
Automatic, normal, single shot |
| Trigger level range |
± 5 grid from the center of the screen |
| Signal format and line/field frequency |
NTSC, PAL, and SECAM broadcasting systems that support any field or line frequency |
| Cursor measurement |
Voltage difference between cursors (△ V), time difference between cursors (△ T), time difference between cursors&voltage difference (△ V), automatic cursor |
| automatic measurement |
30 automatic measurement values, can be displayed with one click |
| Waveform calculation |
＋, －, x, ÷,opposition, FFT |
| Waveform storage |
16 sets of waveforms |
| Standard interface |
USB host, USB device |
| Frequency meter |
support |
| Power supply |
100V - 240V AC, 50/60Hz, CAT II |
| Dimensions (length x height x width) |
301 x 152 x 70 mm |
| Weight (host) |
1.1kg |