Approximate Dimension: Stegosaurus_0.8*0.96inch T-Rex_0.8*1inch Triceratops_0.7x0.9inch Parasaur _0.8*0.96inch Brachiosaurus_0.8*1inch Giga dino_0.7x0.9inch Egg_1.2x1inch Mould color: clear Finish: gloss (may require polish/glaze if need a shiniest/most glossy look) Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit Can be used with dishwasher/oven/refrigerator Food grade, no BPA/PVC/phthalate Wash and boil before use, especially for food More Tips to use with Epoxy Resin: 1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put...

Dinosaur Epoxy Resin Molds Egg DIY Jewellery Casting Supplies Set Pack of 4

Approximate Dimension:

Stegosaurus_0.8*0.96inch

T-Rex_0.8*1inch

Triceratops_0.7x0.9inch

Parasaur _0.8*0.96inch

Brachiosaurus_0.8*1inch

Giga dino_0.7x0.9inch

Egg_1.2x1inch

Mould color: clear

Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)

Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit

Can be used with dishwasher/oven/refrigerator

Food grade, no BPA/PVC/phthalate

Wash and boil before use, especially for food

More Tips to use with Epoxy Resin:

1) Poured in silicone molds in layers, allowing air bubbles completely escape;

2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.

3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.

4) Do not use water-base ink for resin casting.

5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.

6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.


Item Specifics
Brand musykrafties
MPN 4787-4789 4793-p
Material Silicone
Type Resin Mold
Color Clear
Theme Dinosaur
Country/Region of Manufacture China

Payment

We will send out the order in 1 business day upon receiving payment

Shipping

For AU orders, delivery usually takes around 2 WEEKS .

For other countries delivery time is varied, US UK CA orders are usually in 2 WEEKS.  European Union Countries exclude UK usually be in 3 WEEKS. For other most part of the world delivery time is based on the flight availability, usually will be in 2-6 WEEKS.

For express service of all the world usually will be in a week.

Returns

We accept return in 30 days

Contact Us

If not receive on time or other types of question, please contact us via ebay message. We will be of assistance.

Shop Category
 Store Home
 Sugarcraft and Cake Decoration
 Party Supplies
 Hobbies and Tablescape
 Other
Hot Item
New List Item
Dinosaur Epoxy Resin Molds Egg DIY Jewellery Casting Supplies Set Pack of 4

Approximate Dimension:

Stegosaurus_0.8*0.96inch

T-Rex_0.8*1inch

Triceratops_0.7x0.9inch

Parasaur _0.8*0.96inch

Brachiosaurus_0.8*1inch

Giga dino_0.7x0.9inch

Egg_1.2x1inch

Mould color: clear

Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)

Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit

Can be used with dishwasher/oven/refrigerator

Food grade, no BPA/PVC/phthalate

Wash and boil before use, especially for food

More Tips to use with Epoxy Resin:

1) Poured in silicone molds in layers, allowing air bubbles completely escape;

2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.

3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.

4) Do not use water-base ink for resin casting.

5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.

6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.



We will send out the order in 1 business day upon receiving payment

For AU orders, delivery usually takes around 2 WEEKS .

For other countries delivery time is varied, US UK CA orders are usually in 2 WEEKS.  European Union Countries exclude UK usually be in 3 WEEKS. For other most part of the world delivery time is based on the flight availability, usually will be in 2-6 WEEKS.

For express service of all the world usually will be in a week.

We accept return in 30 days

If not receive on time or other types of question, please contact us via ebay message. We will be of assistance.


All rights reserved.