Woodland Scenics Lightweight Risers / Inclines / Foam Sheets etc
N OO
Please choose your items from the drop down menu above.
Lightweight Risers
Risers are generally used with Incline/Decline Starters to
create varying grades on your layout. Risers are easily flexed to form curves
and work on plywood or foam bases. To install, pin in place with Foam Nails and
attach with Foam Tack Glue or Low Temp Foam Glue Gun and Glue Sticks.
(These can be found in our eBay shop)
ST1406 - ½" x 2' Long. Riser (x4)
4/pkg - 1/2" x 2 1/2" x 24" (1.27 cm x 6.35
cm x 60.9 cm)
ST1407 – 1" x 2' Long. Riser (x4)
4/pkg - 1" x 2 1/2" x 24" (2.54 cm x 6.35 cm
x 60.9 cm)
ST1408 - 2" x 2' Long. Riser (x4)
4/pkg - 2" x 2 1/2" x 24" (5.08 cm x 6.35 cm
x 60.9 cm)
ST1409 – 4" x 2' Long. Riser (x2)
2/pkg - 4" x 2 1/2" x 24" (10.1 cm x 6.35 cm
x 60.9 cm)
Incline/Decline
Incline/Decline Sets are the ideal way to alter the
elevation of your track quickly and easily. Each set includes the high-density
foam pieces necessary to raise or lower the elevation of your track.
Incline/Decline Sets come in either 2%, 3% or 4% grades.
Sets can start an incline at 0" and reach a maximum
height of 4 1/2" (11.4 cm). Declines can start at a maximum height of 4
1/2" (11.4 cm) and lower to 0". Actual measurements depend on the
grade used.
NOTE: One Set only includes foam pieces necessary either to
create an incline OR create a decline. One Set cannot do both. You will need
two Sets to create both an incline and a decline on your layout.
To install Incline/Decline Sets, pin in place with Foam
Nails and attach with Foam Tack Glue or the Low Temp Foam Glue Gun and Glue
Sticks. (These can be found in our eBay shop)
ST1410 – 2 percent x 2' Incline/Decline Set 0-4" in
16' (x8/set)
8 sections raise/lower 4" (10.1 cm) in a 16' (4.87 m)
run
Each section measuring 2 1/2" w x 24" l (6.35 x
60.9 cm)
ST1411 – 4 percent x 2' Incline/Decline Set 0-4" in
8' (x4/Set)
4 sections raise/lower 4" (10.1 cm) in an 8' (2.43 m)
run
Each section measuring 2 1/2" w x 24" l (6.35 x
60.9 cm)
Incline Starters
Incline Starters are wedges of high-density foam used to
start your track on an incline or decline. Each piece in a package
elevates/lowers the track to/from a designated number of inches within a
24" stretch, allowing for a smooth transition from one height to another.
To install, pin in place with Foam Nails and attach with
Foam Tack Glue or the Low Temp Foam Glue Gun and Glue Sticks. Use alone or with
Risers. (These can be found in our eBay shop)
ST1412 – 2 percent x 2' Incline Starter ½" Elevation
(x8/Set)
8/pkg - each piece elevates from 0 - 1/2" (0 - 1.27 cm) within 24" (60.96 cm) and measures 2 1/2" w x 24" l (6.35 cm x 60.9 cm)
ST1413 – 4 percent x 2' Incline Starter 1" Elevation
(x4/Set)
4/pkg - each piece elevates from 0 - 1" (0 - 2.54 cm)
within 24" (60.96 cm) and measures 2 1/2" w x 24" l (6.35 cm x
60.9 cm)
Profile Boards
Use the interlocking Profile Boards and Connector pieces to
create the layout perimeters and mountain profiles. Place Boards end-to-end or
stack to any height using the Connectors. Trim Profile Boards with the Hot Wire
Foam Cutter or a Foam Knife. Glue in place with Foam Tack Glue or the Low Temp
Foam Glue Gun and Glue Sticks. (These can be found in our eBay shop)
Each Board measures 24" l x 8" h (20.3 cm x 60.9
cm). The thickest section is 1" (25 mm) and the thinnest section is
1/2" (12 mm).
ST1419 - 2 Profile Boards™ & 2 Connectors
2 Profile Boards and 2 Connectors per package
Foam Sheet
Use Foam Sheets as a layout base, to enclose tunnels, build
bridges, create interior terrain profiles, form level elevated areas for
buildings and towns, to build other structures and for other craft projects.
Pin with Foam Nails and glue in place with Foam Tack Glue or
the Low Temp Foam Glue Gun and Glue Sticks. (These can be found in our eBay
shop)
ST1422 - ¼" x 2' Long Foam Sheet (1x loose sheet)
1 sheet/pkg - measures 1/4" d x 12" w x 24" l
(6.35 mm x 30.4 cm x 60.9 cm)
ST1423 - ½" x 2' Long Foam Sheet (1x loose sheet)
1 sheet/pkg - measures 1/2" d x 12" w x 24" l
(1.27 x 30.4 x 60.9 cm)
ST1424 - 1" x 2' Long Foam Sheet (1x loose sheet)
1 sheet/pkg - measures 1" d x 12" w x 24" l
(2.54 x 30.4 x 60.9 cm)
Accessories
ST1432 - Foam Nails (x75)
Use Foam Nails to temporarily pin track, foam or other
products to your layout.
This package contains 75 pieces.