12V Universal Car Immobilizer Security System Alarm with 2 Remote Controller UK

Details

Features:
1. This system is a device that controls the engine to turn off. When your car is parked, it can protect the car from being stolen; or when you are forced to leave the car by others, it can also protect the car from being stolen. It keeps the car safe even when you're away from it.
2. This system has the function of controlling the engine circuit and oil circuit, and the automatic flameout time is 1 minute and a half or 3 minutes.
 
Warning:
It is recommended to install the LED status indicator in a hidden place to prevent the on/off status of the anti-robbery device from being detected by intruders.
 
LED Light Indicator Instructions:
Red / Green - Alternative - While engine is on
Red - Flashes - First stage activated
Red - Constant - Second stage Activated
Green - Constant for 2 to 4 seconds - Signal transmitted by the remote
Green - Constant - Learning code mode
None - OFF - System off
 
How to operate:
1. Start the remote control
Press and hold the remote control button for 8 seconds until the indicator light is on, then the remote control enters the working state and the indicator light starts to flash intermittently.
2. The remote control is turned off
Press and hold the remote control button for 8 seconds until the indicator light does not light up. At this time, the remote control is turned off and the working status indicator light does not flash, and only the manual button can work.
3. Shut down the system
Press the emergency release button 5 times to turn off the protection system. This action confirms the owner and allows the engine to start. With this emergency release, the car works normally
4. Driving identification
Before entering the car, turn on the remote control, and the LED indicator light will be on for 4 seconds, indicating that the host system has recognized the signal sent by the remote control, and then the LED indicator light will flash alternately with traffic lights to confirm the reception of the signal and display the status of the car normally.
5. Automatic anti-robbery
If you are kicked out of the car and haven't had time to do any protection operations, the device will automatically do it for you. At this time, the car will automatically turn off after 1 minute and 30 seconds (Phase 1), or 3 minutes (Phase 2).
6. Learning code method
First, temporarily release the system, press the emergency release button 5 times and the LED indicator turns green, long press the emergency release button until the green light flashes quickly, press the button on the remote control, the LED indicator flashes red and green once, indicating that the remote control is successfully learned. This operation allows you to learn 2 remotes at the same time. The learning time for each remote control should not exceed 2 seconds. Once the programming is successful, please open the system protection device.
 
Installation method:
--Install the main unit in a hidden position in the car, away from moving parts.
--LED status indicators are installed in places that are not easily found.
--Emergency contact switches must also be installed in concealed locations.
--The red/black wire is connected to the 85 port of the relay, 86 is connected to the positive pole, and the port 87a is connected to the circuit of the original car flameout device.
--The black/white wire is connected to the 85 port of the relay, the 86 is connected to the positive terminal, and the port 87 must be connected to the oil pump circuit.
 
Specifications:
Material: ABS + electronic components
Model: LB-AR028
Compatible Models: All Models
Alarm mode: oil cut, power cut
Alarm range: 50 meters
Supply voltage: 12-15 V
Operating temperature: 100°C
Frequency: 433.92Hz
Alarm response time: 0.5
Alarm Loudness: 0.5
Battery Information: Battery
Type: button battery
Subtype: CR2032
Battery material: 12V lithium battery
Type: one-way alarm
Category: Anti-theft
Alarm Alarm Trigger Description: Vibration
 
Packing list:
1 * Main Uint
2 * Remote Controller
1 * LED connection cable
2 * Cable
1 * User manual


This is the description of Payment Method. 


Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

This is the description of Returns Policy. 

Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

Copyright©2017 DataCaciques

Item Description

Features:
1. This system is a device that controls the engine to turn off. When your car is parked, it can protect the car from being stolen; or when you are forced to leave the car by others, it can also protect the car from being stolen. It keeps the car safe even when you're away from it.
2. This system has the function of controlling the engine circuit and oil circuit, and the automatic flameout time is 1 minute and a half or 3 minutes.
 
Warning:
It is recommended to install the LED status indicator in a hidden place to prevent the on/off status of the anti-robbery device from being detected by intruders.
 
LED Light Indicator Instructions:
Red / Green - Alternative - While engine is on
Red - Flashes - First stage activated
Red - Constant - Second stage Activated
Green - Constant for 2 to 4 seconds - Signal transmitted by the remote
Green - Constant - Learning code mode
None - OFF - System off
 
How to operate:
1. Start the remote control
Press and hold the remote control button for 8 seconds until the indicator light is on, then the remote control enters the working state and the indicator light starts to flash intermittently.
2. The remote control is turned off
Press and hold the remote control button for 8 seconds until the indicator light does not light up. At this time, the remote control is turned off and the working status indicator light does not flash, and only the manual button can work.
3. Shut down the system
Press the emergency release button 5 times to turn off the protection system. This action confirms the owner and allows the engine to start. With this emergency release, the car works normally
4. Driving identification
Before entering the car, turn on the remote control, and the LED indicator light will be on for 4 seconds, indicating that the host system has recognized the signal sent by the remote control, and then the LED indicator light will flash alternately with traffic lights to confirm the reception of the signal and display the status of the car normally.
5. Automatic anti-robbery
If you are kicked out of the car and haven't had time to do any protection operations, the device will automatically do it for you. At this time, the car will automatically turn off after 1 minute and 30 seconds (Phase 1), or 3 minutes (Phase 2).
6. Learning code method
First, temporarily release the system, press the emergency release button 5 times and the LED indicator turns green, long press the emergency release button until the green light flashes quickly, press the button on the remote control, the LED indicator flashes red and green once, indicating that the remote control is successfully learned. This operation allows you to learn 2 remotes at the same time. The learning time for each remote control should not exceed 2 seconds. Once the programming is successful, please open the system protection device.
 
Installation method:
--Install the main unit in a hidden position in the car, away from moving parts.
--LED status indicators are installed in places that are not easily found.
--Emergency contact switches must also be installed in concealed locations.
--The red/black wire is connected to the 85 port of the relay, 86 is connected to the positive pole, and the port 87a is connected to the circuit of the original car flameout device.
--The black/white wire is connected to the 85 port of the relay, the 86 is connected to the positive terminal, and the port 87 must be connected to the oil pump circuit.
 
Specifications:
Material: ABS + electronic components
Model: LB-AR028
Compatible Models: All Models
Alarm mode: oil cut, power cut
Alarm range: 50 meters
Supply voltage: 12-15 V
Operating temperature: 100°C
Frequency: 433.92Hz
Alarm response time: 0.5
Alarm Loudness: 0.5
Battery Information: Battery
Type: button battery
Subtype: CR2032
Battery material: 12V lithium battery
Type: one-way alarm
Category: Anti-theft
Alarm Alarm Trigger Description: Vibration
 
Packing list:
1 * Main Uint
2 * Remote Controller
1 * LED connection cable
2 * Cable
1 * User manual

Payment

1.We only accept payment from PayPal. 

2.Please make sure your eBay address is correct before you pay.

3.All payment Should be Completed within 7 days, or an unpaid disputed will be opened as payment none receive.

4.If you do not want to pay for the order please contact us via eBay message, we will help your cancel the transaction.

Shipping

1. We only ship to confirmed PayPal addresses.
2. Economy Shipping, with no tracking number.
Standard Shipping, with tracking number.
Express (Expedited) Shipping, with tracking number.
3. Economy shipping needs 2-5 weeks to arrive mostly.
In rare case, it can take up to 6-8 weeks.
It depends on your location and local postal service, as well as the weather condition along the shipping.
4. If you need a faster delivery time, you could choose
Express (Expedited) Shipping.
If you need a tracking number, you could choose Standard Shipping.

Return

1. We offer 60 day money back or replacement guarantee.
In addition, it allows customers to return new and unused products in their original factory condition for any reason within 60 days from the date of purchase.
2. Although we test each item and they are packed professionally, few item(less than 0.1%) might be damaged during the shipping. Please feel free to contact us within 4 days after you receive your package about replacement.
3. If you don't receive items over 35days ,please make sure to contact us before leaving any neutral or negative feedback.We'll try our best to help you solve the problem.

If we authorized the return, customers will get an email with instructions for returning the item. Email will be replied within 24 hours on Chinese business hours.

The sole and exclusive maximum liability to lifesteward arising from any product sold on lifesteward ebay account shall be the price of the product ordered.

Feeback

 1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.

 2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.

 3. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.


On 18-Sep-2023 at 07:55:57 BST, seller added the following information:

DataCaciques