Description:
Product Name:Heat Sink
Type:Heat Sink
Product Weight:about 105g
Heatsink size: about 6.5x5.5x0.7cm
Fan size: about 2.5x2.5x0.6cm
Features:
1. Only support for Raspberry Pi 4 and various expansion boards used on for Raspberry Pi 4;
2. The size of the positioning hole of the radiator is M2.5 internal thread, and the expansion board and the radiator can be fixed with screws or copper posts in the upward or downward direction;
3. The supported fan specifications have a side length of 25mm, the fan positioning hole spacing is 20mm, and the thickness is arbitrary (as long as it does not withstand your development board); when the heat dissipation of a single aluminum radiator is not enough, you can add a cooling fan , thus solving any cooling problems.
4. The fans we equipped are high-quality silent cooling fans, which are the same as the fans of the official POE expansion board.
5. Equipped with six kinds of screws and copper posts to fix the for Raspberry Pi and the expansion board; we strongly recommend that you measure the height of the expansion board you are using to determine the specifications of the copper posts or screws you need.
Notice:
1. The embedded armored aluminum alloy radiator is 7mm high (negative tolerance design) and equipped with M2.5*5+5 copper posts.
2. The total height is 12mm, which can support most for Raspberry Pi 4B expansion boards.
3. If you use expansion boards of other heights, you only need to replace the copper pillars with the correct height.
Package Include:
1 x Embedded Heatsink
1 x Mounting Screw Pack (Equipped with six styles of copper pillars)
1 x Cooling Fan
Notes:
1. Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
2. Please allow slight error due to manual measurement.
3. Please leaving a message before you give the bad feedback, if the products have some problems.
Thanks for your understandings.