V5 IPS Drop in 3.0 Inch Laminated LCD Kit+Pre-cut Shell With Rechargable Battery For GBA Console
Note: You don't need to cut the shell if you buy the shell from us. Otherwise, you need to cut the shell by yourself.
The game console is not included!!!
The shell is customized produced. It can perfectly fit the Hispeedido GBA V5
Laminated backlight LCD kit. No need trimming.
Integer Scaling. No any distortions.
Add FRM On/OFF function(Frame blending On/OFF).
Description:
1. 720x480 display resolution. HD LCD. 9 pixels to 1 pixel. Integer scaling. No any distortions.
2. Wide View angle up to 178 degree.
3. Pre-Laminated Glass Screen lens.
4. The PCB has been embedded in the LCD metal shell.
5. Built-in OSD Menu!
6. Retro pixel Effects: Normal, Retro pixel ( like original AGS-101 LCD ), Scanline 1 and Scanline 2.
7. 15 brightness levels.
8. 8 color modes.
9. FRM On/OFF function(Frame blending On/OFF) is included. For some extremly few games, the image effect will be better when FRM turned on. For most games, No need to turn on FRM Function. The default FRM is OFF.
10. Touch Screen to change the brightness and the color modes.
11. Compatible 32 pin and 40 pin motherboard.
*You need to welding 3 wires to control the OSD Menu*
OSD Menu Operation:
-Press the Select+L+R buttons for 1 second at the same time, then release the buttons to activate the OSD Menu.
-Press the Select button to select the adjustment item when OSD Menu activated.
-Press the L or R button to adjust the item when OSD Menu activated.
You don't need to do any welding if you don't want the OSD menu!
1 lossless to achieve lithium battery power supply for GBA.
2. With the exclusive Type-C battery back cover, (more colors will be sold in future)
3. 1800mAh The actual capacity has no false label. Using the genuine game cartridges with medium
brightness on the IPS screen, it can be used at least 12 hours until the power light goes to red light.
4. Uses TI battery management chip. No heat sink required.
5. Over Voltage protection, Over Current protection, Short circuit protection.
1x Pre-Laminated IPS LCD
2x Screwdrivers
3x red wires
2x ribbon cables
1x Shell case
1 set buttons
1 set Rubber Pad
1x Sticker label
1 set screws
1x Battery