Discription
1. Suitable for GoPro Hero6 Black/Hero7 Black LCD assembly.
2. Replace damaged or unusable parts with new ones.
3. Each item is inspected and in good condition before shipment.
4. Completely suitable for work.
5. Professional installation is strongly recommended. We are not responsible for any equipment damage that may occur when you replace components.

Precautions before installation
Tip 1: Pre installation testing
Do not remove any protective film or labels during testing. Please pay attention to static electricity issues.
Before attempting any repairs, be sure to wear an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging electronic components inside the device.
Make sure you wear goggles and be careful not to cut your fingers with glass shards.
Tip 2: Simulation Test
Screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate the test, which means that the equipment is separated, the audio cable (motherboard+LCD or screen) is connected and replaced with a new one, powered on, and the test is completed. If the test is successful, please install. If it cannot be displayed, please contact us as soon as possible. And please do not force it to be installed in the device. Once the screen is installed, we will not be responsible.
Tip 3: Do not excessively bend the cable
Please ensure that the LCD cable is not excessively bent. Bending beyond 90 degrees will result in a black display.