Documento senza titolo
HOMECHI SIAMOPAGAMENTICONDIZIONISPEDIZIONI

Bitubo ECH2 pressurized fork cartridges created for racing

Product number: MV002ECHA9

Bitubo ECH cartridges are created to provide maximum front axle stability even in the most violent braking sections. The increase in grip is noticeable when entering and traveling the curve even at the most extreme lean angles. The balance of the applied forces is easily verified by the homogeneous wear of the rubber. A unique support when braking and cornering on all types of asphalt. Bitubo EBH series pressurized cartridges are the result of the long experience gained by Bitubo's research and development sector in the world of racing in direct contact with the best teams of the SBK, BSB, IDM, CIV world championships. The distinct, simple and intuitive adjustments in the two compression and extension cartridges are easily accessible on the top cap. The high damping coefficient avoids excessive sinking of the front axle already at low speeds.

A series of innovative systems find space in this technologically advanced product, from the FPS (Bitubo patent): innovative damping system for the immediate control of oscillations with anti-cavitation of the internal fluid. Pressurized system with low pressure gas and asymmetrical cartridges one for compression control and one for extension control. The LC system provides through the adoption of light alloy components all CNC machined to the drastic reduction of the total weight of the cartridges. The EC (Easy charger) system allows the quick change of the cartridge without the need to remove the entire fork from the bike, which allows the bike to be set up very quickly on the track. Finally, the OPC (Over pressure control) system controls the overpressure.

The cartridges are supplied including FUCHS SILKOLENE high smoothness Synt Oil, for external lubrication.

Technical features:

  • Specific for: Mv Agusta F3 800 no Abs 2013>2020
  • Type: F310ABCV
  • Hydraulic control with FPS system
  • 27 mm piston in ergal
  • 10 mm pumping rods
  • Mechanical limit switch with polyurethane pad
  • CrSi steel springs, with heat treatment
  • Fork top cap with integrated hydraulic preload (Bitubo patent)
  • Independent adjustment in Compression and Extension
  • Coaxial compensation chamber (Bitubo patent)
  • Hydraulic lubrication separate from the sliding one

 Adjustments:

  • Spring preload (range 12 mm in 6 turns)
  • Compression: 24 clicks
  • Extension: 24 clicksBitubo ECH2 pressurized fork cartridges created for racing

* Where specifically indicated - See information on returns