supersinoauto
Specification
Condition: Brand New
Connector: 3 Pins
Built to strict quality control standards.
Ready to use, Direct Replacement.
100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
100% pure copper windings in bobbins improve durability ,thermoplastic housing withstands heat stress for enhanced durability
Silicone rubber boot withstands extreme heat to ensure superior insulation
Spark Plugs are using High-Performance Iridium metal, Much better than Nickel and Platinum
It's suggested that ignition coil and spark plug be replaced in a sychronized manner to lower the likelihood of common ignition system dysfunctions such as failure to start,engine vibration, misfiring, inadequate power, spark plug fouling and poor fuel economy
Package include:
8pcs Ignition Coils + 16pcs Iridium Spark Plugs
Interchange Part Number:
5C1569, E1004, 52-1828, 68060346AA, IC584, UF504, UF-504, C1526
56029129AB, 56029129AA, 56029129AF, 68060346AA, 52-1828, GN10352, E1004
Fitment:
2012-2014 Chrysler 300 V8 6.4L
2005-2010 Chrysler 300 V8 6.1L
2008-2015 Chrysler 300 V8 5.7L
2007-2009 Chrysler Aspen V8 5.7L
2011-2016 Dodge Challenger V8 6.4L
2011-2016 Dodge Challenger V8 5.7L
2008-2010 Dodge Challenger V8 6.1L
2006-2010 Dodge Charger V8 6.1L
2006-2015 Dodge Charger V8 5.7L
2012-2014 Dodge Charger V8 6.4L
2011-2015 Dodge Durango V8 5.7L
2006-2009 Dodge Durango V8 5.7L
2005-2008 Dodge Magnum V8 5.7L
2006-2008 Dodge Magnum V8 6.1L
2006-2010 Dodge Ram 1500 Truck V8 5.7L
2006-2010 Dodge Ram 2500 Truck V8 5.7L
2006-2009 Dodge Ram 3500 Truck V8 5.7L
2006-2010 Jeep Commander (XK) V8 5.7L
2012-2014 Jeep Grand Cherokee V8 6.4L
2006-2010 Jeep Grand Cherokee V8 6.1L
2006-2015 Jeep Grand Cherokee V8 5.7L
2011-2015 Ram 1500 Truck V8 5.7L
2011-2015 Ram 2500 Truck V8 5.7L
2011-2015 Ram 3500 Truck V8 5.7L
How to Change Ignition Coils and Spark Plugs?
This product recommends professional installation.
1. Disconnect the old ignition coil and spark plugs
2. Disconnect your battery’s negative terminal
3. Locate the ignition coil and spark plugs to be replaced.
4. Release the clip on the plug running into the side of coil.
5. Use a wrench to unscrew the bolts holding the original coil in place
6. Extract original ignition coil and spark plugs from the engine bay
7. Swapping in the new ignition coil and spark plugs
8. Prior to installation, compare the new coil to the old one
9. Orient the new coil in the same direction
10. Insert the bolts to hold the coil in place
11. Activate the New ignition coil and spark plugs
12. Connect the plug into the side coil
13. Plug in ignition cables according to the order written on them.
14. Reconnect the battery
15. Start the vehicle to test the new ignition coil and spark plugs
Note:
1. In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement.
2. Pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.
Kindly remind:
For most auto parts the most important thing for auto parts is to see the part number of the product you need. Generally, if the number is consistent, it is compatible. Please ensure that the part number of your old part is the same as the part number listed in listing.
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |