Features:
1.Battery level display, 4-level LED light displays battery level, intelligent
automatic shutdown in non working state. (Note that the battery power is
calculated using the voltage calculation method. Please use batteries with high
performance and stable voltage. If the voltage drop of the battery is too poor,
the indicator light's power will drop quickly, and the output will almost remain
in the first and second grids of power.)
2.Unlike traditional non detachable mobile power supply covers, this one can be
screwed on the back and can be opened repeatedly by removing the screws,
allowing for easy replacement of battery cells.
3.Dual USB output port 5V/2.4A (MAX), micro/type c input port (PD charger not
supported).
4.Compact and convenient, it is a good companion for home/outing/outdoor sports.
5.The motherboard is equipped with anti installation protection, and the battery
is installed backwards without burning the motherboard. If reinstalled
correctly, it can be used normally, but do not merge one positive and one
negative into a damaged battery, damage the battery, or severely aged battery,
otherwise it will cause direct short circuit and spring burning of the battery.
Before purchasing, please check below notice:
1: Battery that can be used: 18650 lithium battery (flat head without protective
plate)
Requirements for connecting to batteries: 3.3-4.2V lithium batteries (18650 flat
head lithium batteries): Do not connect to other batteries, such as 1.2V 18650
nickel hydrogen batteries, 3.2V iron lithium batteries, all dry batteries, and
12V lead-acid batteries
2: Charging and discharging protection: The circuit board is equipped with a
built-in lithium battery protection IC, which includes overvoltage protection,
overcurrent protection, undervoltage protection, etc
3: Three packs can accommodate up to three 18650 batteries (two packs, one pack
is not a problem).
4: Charging input requirements: The most suitable charger is a 5V2A or higher
charger, and any other 5V constant voltage power supply can be used as the
charging input power supply. Note that PD chargers are not supported
5: After the battery is first connected, it is usually necessary to activate the
circuit board to generate an output. If the mobile power supply is not used for
a long time, the output will be turned off, and activation is still necessary.
Parameters:
Colors: black, white, blue, green
Cell type: 3.7V18650 battery (flat head, no protective plate, internal
resistance less than 50 milliohms, 1C discharge rate, each voltage must be
between 3.3 and 4.2V), cannot use pointed batteries, does not support
modification or insertion of other batteries that do not meet the requirements!)
Dual USB output parameters: 5V/0.1-2.1A (high current devices, fast charging
mobile phones, mobile phones with a screen size of 5 inches or more, high power,
do not use batteries that are too poor, otherwise normal output and inaccurate
battery power cannot be achieved.)
Input interface: Type-C port and Micro port (PD not supported)
Input parameter: Standard current 5V/0.1-2A
Package include:
1 * 18650 batteries mobile power supply housing