Recommended slicer setting:
retraction speed over 80MM/S
retraction length 2.5-4MM
If you are facing PLA clogging problem, please try the followings:
1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"
2. Increase the extruder acceleration. Check your firmware settings. G-command "M201 E9000"
3. Reduce the retraction length. It depends on your machine setup.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not install the 2 screws for support the heatblcok like the stock hotend on the CR-10 printer.
6. Make sure that there is no gap between the heatsink and the heat breaker.
▉NOTE:
This product only supports 1.75mm filament!!! Not compatible CR10S PRO.
We found that many customers do not know how to properly install the nozzle.
Remember the core issues in the installation process.
Just make sure your nozzle and HEAT BREAK front end are tight and sealed. Otherwise, the filament will leak along the screw holes.
▉NEWS:
Titanium Alloy HEATBREAK
Upgrade content:
1 Replaced by TC4 material into GRADE5.
2 Replacement with advanced machines for processing.
3 modified heat treatment method.
Performance after the upgrade:
1 The appearance is more shiny.
2 thread precision improvement.
2 The inner wall of the tube is smoother (reducing the chance of filament clogging).
3 The interface is smoother and more precise (can effectively prevent the filament from leaking).
Brass Nozzle Kit :
MK8 Brass Nozzle 1.75/0.4mm X1
Titanium alloy heat break 1.75MM X 1
Aluminum Heater Block X1
Aluminium Heatsink X 1
Thermistor (NTC 100K B3950 can be up to 300 degrees)X 1
Heater Cartridge(12V or 24V 40W)X 1
Cable length 1M
Gift：Silicone socks X1
Hardened Steel Nozzle Kit :
MK8 Hardened Steel Nozzle 1.75/0.4mm X 1
Titanium alloy heat break 1.75MM X 1
Aluminum Heater Block X1
Aluminium Heatsink X 1
Thermistor (NTC 100K B3950 can be up to 300 degrees)X 1
Heater Cartridge(12V or 24V 40W)X1
Cable length 1M
Gift：Silicone socks X1
Plated Copper Kit :
MK8 Plated Copper Nozzle 1.75/0.4mm X 1
Titanium alloy heat break 1.75MM X 1
Plated Copper Heater Block X 1
Aluminium Heatsink X1
Thermistor (NTC 100K B3950 can be up to 300 degrees)X 1
Heater Cartridge(24V 40W)X 1
Cable length 1M
Gift：Silicone socks X1
Compatible:
Compatible with CR-10S
Compatible with CR-10S -S5
Compatible with CR-10S -S4
Compatible with CR-10
Compatible with CR-10 -MINI
Compatible with CR-20
Compatible with CR-20 PRO
Compatible with Ender2
Compatible with Ender3
Compatible with Ender3 PRO
Compatible with TronXY X5S
Compatible with Tevo Tornado
Compatible with Alfawise U20
▉NOTE:
(Please choose the matching rated voltage 12V or 24V according to your own 3D printer).
The iU3D has always paid attention to product quality.We choose the best materials that can be found in the market, coupled with high-precision CNC machining,
and strict quality assurance can bring this high-quality HOTEND Kit.
We believe that only high-quality products can guarantee the quality of your work.
Please believe in our quality and believe that you will not regret when you receive the goods.