Specifications:

  • The Wi-Fi Repeater is a Combined Wired/Wireless Network Connection Device
  • Latest software wizard for easy setup
  • Access to Wireless standard 802.11n with Wireless Transmission Speeds of Up to 300Mbps
  • Easy to Extends the Range of your WIFI Network, No Worry about Obstacles Weakening your WIFI Signal
  • Also Works Well with Other 11b/g and 11n Protocol Wireless Products
  • Improves Wireless Coverage in all WLAN Networks
  • Provides up to 300Mbps Transmission Rates
  • Downward complies with 802.11g (54Mbit/s) and 802.11b standard (11Mbit/s)
  • Operating Temperature : 0ºC~40ºC
  • Storage Temperature: 10~70ºC
  • Relative Humidity (Operational) :10%~90% , noncondensing
  • Relative Humidity (Storage) :10%~90% , noncondensing
  • Support 2.4 GHz WLAN networks
  • Support Wireless Repeater Mode and Standard AP Mod
  • Wireless access point or network extender to bring WIFI to your home, study, or office
  • Antennas integrated
  • Maximum WLAN security with WPA2, WPA, and WEP (128/64)
  • Use it to Extend the Range of your WIFI Network Over a Wider Area or Eliminate dead-spots due to low signal power
  • No Trailing Wires around the place
  • Distance: Outdoors 300m, Indoor 100m (According to the Actual Environment Change)

Package Includes:

  • 1x Wireless WIFI Extender Repeater (US Plug)
  • 1x Installation Manual
  • 1x Network Cable(1FT)

in case the quick installation guide wasn’t helpful, we can guide you through the installation process.

1) Plug the Wi-Fi extender into the outlet closest to your router
2) Using an ethernet cable, connect the extender to your router (not modem)
3) Hold down the WPS button for about 5 seconds
4) Go to the Wi-Fi / Network selection at the bottom-right of your screen
5) Connect to the network that says “WiFi-Repeater”
6) Enter a web browser, then copy and paste the following in the address bar
http://192.168.10.1/
7) Type in “admin” in all lowercase letters for BOTH username and password
8) This will bring you to a screen with colored boxes, click the box that says “Repeater Wizard”
9) Select which Wi-Fi network you want to extend the range of, then type in your Wi-Fi password where it says “Key”
-If you don’t know your password, that’s fine. Just make up a new one. Once you do it will be the password to your original network, as well as your extension.
10) Click “Save” and then “Apply”. Just let the Repeater/Extender restart, and you are good to go!