Extra niedriges Einzelbett aus Massivholz in unbehandelter Fichte/Tanne
ein völlig naturbelassenes Einzelbett aus Nadelholz
Liegefläche 90x200 cm
Zur Auswahl:
60.47N-09oR - Bettgestell ohne Zubehör
60.47N-09 - Bettgestell mit Rollrost
60.47N-09M - Bettgestell mit Rollrost und Matratze
Naturprodukt Holz ... logisch!
Ein sehr flaches Einzelbett, naturbelassen und unbehandelt
Bettrahmen aus massiver Fichte oder Tanne, fein geschliffen.
Das Bett wird in einer ortsansässigen Schreinerei aus heimischem Holz (Niederbayern) gefertigt.
Gut geeignet für Allergiker.
Kann bei Bedarf leicht selbst mit spannenden Farben gestrichen werden.
Wenn Sie sich für einen Farbanstrich entscheiden, schleifen Sie die Oberfläche mit Schleifpapier leicht an und entstauben die Fläche.
Erste Schicht auftragen und trocknen lassen. Mit feinem Schleifpapier zwischenschleifen und die letzte Schicht auftragen.
An den Seitenwänden befindet sich eine Auflageleiste zur Aufnahme des Rollrostes (optionales Zubehör).
Der Aufbau ist simpel. Ein Schraubensatz liegt bei.
Das Einzelbett ist außergewöhnlich flach.
Es eignet sich hervorragend als Loftbett und unter niedrigen Decken in Dachgeschossen oder ausgebauten Dachböden.
Puristisches Möbeldesign - ideal für Japandi-Style-Fans.
Maße:
Außenmaß ca. 95 cm x 205 cm
Rahmenhöhe nur ca. 9 cm
Stärke der Seitenwände ca. 2,6 cm
Einlegetiefe für Rollrost, Matratze ca. 5,5 cm.
Verbunden mit Dübel und Schraube
Statische Belastung: 120 kg
Optional:
einfacher Rollrost aus Nadelholz am Gurtband
Optional Matratze:
vakuumierte Rollmatratze (Komfortschaum), RG 25
H2 = Mittelhart
ca. 150 mm dick, Kernhöhe ca. 140 mm
mit atmungsaktiver Faser versteppt
abnehmbarer und bis 60 Grad waschbarer Microfaserbezug (100% Polyester)
Extra low futon bed in oiled spruce.
Ideal for storage behind small doors and cupboards.
Available in 3 variants:
60.47N-14oR frame only
60.47N-14 with rigid slats
60.47N-14M with mattress
Made from natural wood ... of course !
This practical low platform bed is ideal as an emergency bed.
Stowed vertically on the wall, it fits behind doors or cupboards so as not to lose space.
If necessary, simply lay it on the floor and you're perfectly equipped for surprise guests.
Solid spuce was used for the sturdy frame.
The wood is only natural, unlaquered not oiled.
On the sides there is a support strip for a roll-up grill, slats (optional accessory).
The structure is simple. A set of screws is included.
Dimensions:
Lying/mattress surface 140x200 cm
Outside dimensions approx. 145 cm x 205 cm
Frame height only approx. 9 cm
Side wall thickness approx. 2.7 cm
Hardware included except for slat fixing screws.
Description Mattress if chosen:
RG26 foam mattresses. 140x200 cm
Total height approx. 140mm, foam height 120mm
Medium hardness = H2
Comfortable mattress up to a person weight of approx. 90kg
Lined with breathable fabric.,Lining 50% cotton, 50% polyester.
Very cosy and comfortable mattress, also suitable for children and all types of slats.
Lit futon très bas, en bois d'épicéa ou de sapin non traité, base idéale pour combiner avec futon, surface de couchage 90 x 200 cm
Une bonne sensation de sommeil: comme allongé sur le sol, mais avec une bonne ventilation.
Aussi parfait comme lit pour les petits enfants ou pour les invités.
Produit de bois naturel ... bien sûr!
Choisissez votre variante:
- cadre de lit sans literie
- cadre de lit avec sommier à lattes
- cadre de lit avec sommier et matelas de mousse à rouleau
Description:
surface de couchage 90 x 200 cm,
Le lit est fabriqué dans une menuiserie locale en bois local (Basse-Bavière).
Bon pour les personnes allergiques.
Cadre robuste en épicéa ou de sapin non traité donc très naturel,
parties latérales avec une barre de support pour le sommier,
vis incluses, assemblage facile
Peut être facilement peint soi-même avec des couleurs attrayantes si nécessaire.
Dimensions:
dimensions extérieures: environ 95 cm x 205 cm
hauteur du cadre: environ 9 cm
épaisseur des parties latérales: environ 2,6 cm
profondeur d'insertion pour sommier et matelas environ 5,5 cm
En option, simple sommier à lattes en bois sur la sangle
Matelas en option:
matelas à rouleau sous vide (mousse de confort), RG 25
H2 = moyennement dur
épaisseur d'env. 150 mm
hauteur du noyau env. 140 mm
piqué de fibres respirantes
housse en microfibres (100% polyester) amovible et lavable jusqu'à 60 degrés
Letto singolo extra basso in legno massiccio di abete rosso/abete grezzo
letto singolo completamente naturale in legno in conifera
superficie di sdraio 90x200 cm
Da scegliere tra:
60.47N-09oR - solo lettiera senza accessori
60.47N-09 - con doghe di legno rigide
60.47N-09M - Rete con rete a scomparsa e materasso
Prodotto naturale in legno... logico!
Un letto singolo molto piatto, naturale e non trattato
Struttura del letto in legno massiccio di abete rosso o abete, finemente levigato.
Il letto è realizzato in legno locale (Bassa Baviera) in una falegnameria locale.
Adatto a chi soffre di allergie.
Se necessario, può essere facilmente verniciato da soli con colori interessanti.
Se si decide di verniciare, carteggiare leggermente la superficie con carta vetrata e rimuovere la polvere.
Applicare la prima mano e lasciare asciugare. Carteggiare tra una mano e l'altra con carta vetrata fine e applicare l'ultima mano.
Sulle pareti laterali è presente una guida di supporto per accogliere le doghe a scomparsa (accessorio opzionale).
Il montaggio è semplice. È incluso un set di viti.
Il letto singolo è eccezionalmente piatto.
È ideale come letto a soppalco e sotto soffitti bassi in soffitte o mansarde.
Design d'arredo purista - ideale per gli appassionati dello stile Japandi.
Dimensioni:
Dimensioni esterne circa 95 cm x 205 cm
Altezza del telaio solo 9 cm circa
Spessore delle pareti laterali circa 2,6 cm
Profondità di inserimento delle doghe e del materasso circa 5,5 cm.
Collegato con tassello e vite
Carico statico: 120 kg
Opzionale:
doghe rigide semplice in legno di conifera in corrispondenza della cintura di fissaggio
Materasso opzionale:
materasso (schiuma comfort), RG 25
H2 = medio duro
spessore circa 130 mm, altezza nucleo circa 120 mm
trapuntato con fibra traspirante
rivestimento sfoderabile in microfibra (100% poliestere) lavabile fino a 60 gradi Celsius
![]() |
powered by plentymarkets |