Lambda Oxygen Sensor for Mini R56 R57 R58 One Cooper Cooper S John Cooper Works
How to install the oxygen sensor?
Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.
Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.
Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.
Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)
Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.
Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.
Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.
Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.
🚙Scope of delivery：
1x lambda probe, control probe before cat
Characteristics:
1. Save fuel，Save fuel and environmental protection.
2.Accelerate,smooth and quick refueling.
3.Performance，Effective, increase motivation.
Technical information
Number of lines: 5
Cable length approx. [mm]: 320
Voltage [V]: 12
Installation location: in front of the catalytic converter
Q: Is it a genuine OE part?
A: It is a so-called aftermarket part, but made just like the OE product, premium quality, high performance and durability.
Reference OE/OEM Number
Bosch 0258017112
BMW 11787549860
BMW 11787560957
Bosch 0 258 017 112
BMW 11 78 7 549 860
BMW 11 78 7 560 957
PEUGEOT 1618.T9
CITROEN V756095780
CITROEN V754986080
CITROEN V753526980
CITROEN V759486080
other Part Numbers：
BMW 11787535269, 11787537984, 11787537993
1787539124, 11787549860, 11787560957
11787569930, 11787570104, 11787590713
11787836394, 756095701
🚙 Vehicle list：
To confirm this part fits your vehicle, select a vehicle from the My Garage list or enter vehicle details above.
Does such a problem bother you?
There is a problem with your sensor! ! !
The oxygen sensor must be replaced in the following situations
Common problems of the lambda sensor:
Question 1: What is an auto lambda sensor? what is the function
Answer: The oxygen sensor is an important part of the automotive electronic fuel injection control system. It mainly detects the oxygen content in the engine's exhaust gas (mainly related to the annual inspection exhaust gas) and sends the corresponding voltage signal to the electronic control unit to adjust the speed and maintain the ideal. The air-fuel ratio is the best conversion rate for three-way catalysis to save fuel and efficiency.
Question 2: Why should I replace the lambda sensor? How often does the lambda probe change?
Answer:In order to improve the performance of the engine and the conversion efficiency of the three-way catalyst; It is generally recommended to replace it in 3-5 years or 100,000-150,000 kilometers (depending on the driving environment and driving habits).
Question 3: What are the car malfunctions when there is a problem with the lambda sensor?
Answer:1. Excessive exhaust emission and black smoke;2. Unsteady idle speed, jerky driving; 3. Sudden increase in fuel consumption, etc. It is recommended to check other conditions at the repair shopcheck repair shop.
Question 4: Can lambda sensors be used universally in different positions?
Answer:Oxygen sensors are divided into pre-catalyst and post-catalyst, and some models have control sensor and diagnostic sensor, and left and right. Lambda probes in different positions have different functions and data. They should not be used indiscriminately. Otherwise, not only will the fault not be removed, but the vehicle will be damaged.
Note!!!
Q: Is it a genuine OE part?
A: It is a so-called aftermarket part, but made just like the OE product, premium quality, high performance and durability.
Q: How do I know if this part will fit my vehicle?
A: Please use our compatibility chart above, note engine displacement (and trim if looking at a body panel).
Please note that the vehicle compatibility list on eBay may not be 100% accurate. However, the OE number given in our listing is. If you are unsure of the compatibility of the parts you require, send us your VIN. Compare the result to the OE number we have in the listing and that would be the best way to guarantee fitment. If you don't check and buy wrong, we are not responsible for the return freight, thanks for your understanding.
