We accept payment by PayPal only.
3in1 Car Digital Clock with Temperature Battery Voltage Display Car Accessories
Description:
Multi-functional electronic clock module, set time, inside and outside temperature, voltage as one. You can display a single item, or you can cycle through the items alternately and customize the item to be displayed. this chip is a temperature compensated clock chip, time accurate. Standard 0.3 m +1.5 m module with two waterproof probes, temperature range -35 ~ 120 degrees. With brightness adjustment, 3 brightness adjustable. And automatic brightness function, which can be dark at night, brighten during the day.
Specifications:
1, working voltage: DC 5.0 ~ 28V
2, frame size: 22 * 58 mm
3, Installation hole size: 19.5 * 56 mm
4, Voltage display range: 5.0 ~ 28V
5, temperature display range: -35 ~ 120 ℃ (Two temperature sensors, 0.3 meters +1.5 meters)
6, power lead length: 28CM
Color:Red,Blue,Green（Please leave me a NOTE about the color you want,otherwise we'll send it randomly）
How to use:
UP the key:
Under normal display, pressing this key will switch between the six display states of [Time] → [Date] → [Temperature 1] → [Temperature 2] → [Voltage] → [Alternating Cycle Display]. (Note: The display items and switching interval time in alternate cycle display mode can be customized by "dd" and "dF" parameters respectively. See the following table
Under the key:
Under normal display status, press this key to enter the setting of time date year parameter. Press the key, "points" began to flash, press the button to adjust the value. After adjusting, press the key again, "hour "starts flashing, press the key to adjust the value. And then press the key to enter the date adjustment [Note that the middle of the colon is not lit]," day "began to flash, press the key after the tune" month "began to flash, tune and then press the key" year "start Flashes, press the key to adjust the parameters into the extended set, see the following" code significance and role of the table "
The significance of the code, please refer to the following
1.0.0u
Voltage measurement error correction, a positive number increases, a negative number decreases. For example, the actual supply voltage is 12.0V, but the table shows 11.9V, it is adjusted to 0.1u.
2.Ac
Temperature ① error calibration parameters. Positive number increases, negative number decreases, the unit is degree, the adjustment range is -5 ~ 5. For example, if you think the displayed temperature is 1 degree higher than the actual temperature, then set Ac: -1, so the electronic clock is automatically reduced by 1 degree and displayed.
(Note: If you do not have a standard thermometer for reference, it is recommended to keep this as Ac: 0)
Temperature ② error calibration parameters. Positive number increases, negative number decreases, the unit is degree, the adjustment range is -5 ~ 5. For example, if you think the displayed temperature is 1 degree higher than the actual temperature, set it to AC : -1, so that the electronic clock is automatically subtracted by 1 degree and displayed again.
(Note: If you do not have a standard thermometer for reference, it is recommended to keep this as AC: 0)
3.dd
Custom cycle shows the display item
[dd: 0] time + temperature 1 + temperature 2+ voltage
[Dd: 1] time + temperature 1 + temperature 2
[Dd: 2] time + temperature 1 + voltage
[Dd: 3] time + voltage
4.Df
Switch the time interval in custom cycle display, the unit is second, the adjustment range is 1 ~ 9. For example, dF: 3, the switching interval is about 3 seconds to switch the display item once. (Please do not set to " 0 ")
5.LL
Display brightness level, the adjustment range is 1 ~ 3, LL: 1 is the darkest, LL: 3 is the brightest.
6.AL
Auto brightness control switch, AL: 0 to turn off the automatic brightness control, AL: 1 to turn on the automatic brightness control. When set to AL: 1, the electronic clock will change the brightness to level 1 after 19:00 everyday and change this level to level 3 every day after 07:00 am.
Note:
After adjusting the AL option, press "Down" again to return to the normal display state, all parameters and time settings can be saved.
Package include:
1pc DIY Multifunction Clock Temperature Voltage Monitor Panel Meter
Precautions:
1. All pictures have been professionally corrected, but due to different ambient light and different display device settings, there may be some deviations in the pictures and items you see, please understand.
2. The data is measured manually, there may be some deviation, but it does not affect the use.
Keep
in mind that PayPal E-Checks will take 3-14 business day to clear .
Once your E-Checks clears,your item will be dispatched to you within 2
working days.
To USA 7-15 business days
To Australia and UK 15-25 business days
To Canada 20-35 business days
South America ,Russia and other countries 25-40 business days
Shipment
may influenced by the weather / custom /holidays and other
uncertainties. If it is delayed, the item may reach some more days
later than the estimate delivery date. But we will try our best to
ensure the items reach soon.
2. If you have any questions, please contact us via ebay message system.
We will reply your message within 48 hours. Trust us, we always try to
resolve any problems for our valued customers.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have.
Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
Certain images/photos incorporated into this template are the royalty free property of Northwestern University Library.