|
|
|
|
|
|
|
|
|
|
|
|
Fitment : (Please look the compatibility list's note to know more details )
2000-2004 Volvo C70 2.3L
2000-2004 Volvo C70 2.4L
2001-2004 Volvo S60 2.3L
2001-2003 2005-2009 Volvo S60 2.4L
2003-2009 Volvo S60 2.5L
2000 Volvo S70 2.3L
2000 Volvo S70 2.4L
2004-2006 Volvo S80 2.5L
2000-2004 Volvo V70 2.3L
2000-2003 2005 Volvo V70 2.4L
2003-2007 Volvo V70 2.5L
2003-2007 Volvo XC70 2.5L
2005-2006 Volvo XC90 2.5L
Features & Benefits:
- One-piece laser welded body for maximum protection and precise operation maintaining sensor integrity
- Dual internal talc seal makes Oxygen sensors last longer
- PTFE allows increased air flow for a faster switch rate to improve fuel economy and save the motorist money at the pump
- Stainless steel shield protects the element from thermal shock and regulates proper air flow to ensure faster sensor response and better performance
- Manufactured with the highest grade materials for prolonged life and superior performance
?
Symptoms of a bad osygen sensor:
- Check Engine Light is ON
-
A decrease in fuel economy
-
Engine Hesitation or misfire
-
Rough Idling
-
look the oxygen sensor's leader
?
Installation steps:
Step1.Park your Vehicle, set the parking brakes and open the hood
Step2.Disconnect the negative battery terminal. Remove the plastic cover. Loosen the 10mm nut. Remove the negative clamp from the battery.
Step3.Locate the oxygen sensor on your Vehicle. Do not touch the sensor or the heat shield until the engine cools down.
Step4.Press the connector and pull it away to unplug the oxygen sensor. Use a flat head screwdriver to press the locking tab on the connector before you pull it.
Step5.Place the oxygen sensor socket on the sensor and break it loose. If the sensor cannot be loosened spray penetrating oil and let it sit for at least 10 minutes. This will make it easier to remove the old Vehicle oxygen sensor.
Step6.Install the new oxygen sensor. Tighten the new Vehicle oxygen sensor to the recommended torque. If you are not sure what the correct torque call your Chevy dealer.
Step7.Connect the oxygen sensor wire harness by plugging it in.
How does the oxygen sensor in a car work?
The goal of the sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible.
The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The mechanism in most sensors involves a chemical reaction that generates a voltage. The engine's computer looks at the voltage to determine if the mixture is rich or lean, and adjusts the amount of fuel entering the engine accordingly.
The reason why the engine needs the oxygen sensor is because the amount of oxygen that the engine can pull in depends on all sorts of things, such as the altitude, the temperature of the air, the temperature of the engine, the barometric pressure, the load on the engine, etc.
When the oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing. Your car performs poorly and uses more fuel than it needs to.
NOTES: If you have any question, please contact us.
| Item Specifics | |
|---|---|
| Manufacturer Part Number | NA06694FU166LL |
| Manufacturer Warranty | 1 Year |
| Brand | nafullparts |
| Fitment Type | Direct Replacement |
| Interchange Part Number | A234-5700 |
| Other Part Number | A17137, A24312, A250-25006, AES10924 |
| Type | Air Fuel Ratio Sensor |
| Number of Pieces | 1 |
| Custom Bundle | No |
| Modified Item | No |
| Position | Upstream |
| Output Signal Range (V) | 0.2 To 0.8 Volt |
| Thread Size | M18*1.5 |
| Universal Or Specific Fit | Specific |
| Attachment Method | Screw-On |
| Connector Gender | Male |
| Sensor Type | Heated |
| Plug Color | Black |
| Wire Quantity | 5 |
| Pin Quantity | 6 |
| Length (mm) | 1205 |
| Feature | ESCP |
| Type | Sensor |
| Features | Direct Fit |
Shop Category Hot Item
New List Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Upstream/Front O2 02 Air Fuel Ratio Oxygen Sensor For 00-07 Volvo V70 2.5L L5
Fitment : (Please look the compatibility list's note to know more details )
2000-2004 Volvo C70 2.3L
Features & Benefits:
?
Symptoms of a bad osygen sensor:
?
Installation steps: Step1.Park your Vehicle, set the parking brakes and open the hood
Step2.Disconnect the negative battery terminal. Remove the plastic cover. Loosen the 10mm nut. Remove the negative clamp from the battery.
Step3.Locate the oxygen sensor on your Vehicle. Do not touch the sensor or the heat shield until the engine cools down.
Step4.Press the connector and pull it away to unplug the oxygen sensor. Use a flat head screwdriver to press the locking tab on the connector before you pull it.
Step5.Place the oxygen sensor socket on the sensor and break it loose. If the sensor cannot be loosened spray penetrating oil and let it sit for at least 10 minutes. This will make it easier to remove the old Vehicle oxygen sensor.
Step6.Install the new oxygen sensor. Tighten the new Vehicle oxygen sensor to the recommended torque. If you are not sure what the correct torque call your Chevy dealer.
Step7.Connect the oxygen sensor wire harness by plugging it in.
How does the oxygen sensor in a car work?
NOTES: If you have any question, please contact us.
Payment Methods
* We accept Credit Card, PayPal and etc, PayPal preferred.
* We will only ship to the confirmed PayPal shipping address given with the payment.
* Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. Shipping & Handing
* Product will be shipped within 1-3 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.
* All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
* We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
* The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
* We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
Warranty & Returns
* We stand behind every product we sell.
* All of our brand new items come with a 30-Days money-back guarantee.
* We define the item as defective only if it doesn't function as described.
* It is the buyer's responsibility to understand the item description before bidding.
* All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
* We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
* Man-made damage by abuse or wrong operation is not covered by this warranty.
* No product liability insurance is assumed.
* Return shipping is to be paid by the Buyer.
Contact & Feedback
* We are always been trying to provide best service and reliable products for every customer.
* If you are satisfed with the product you recieved, please have a good share.
* If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to reslove any problem for you.
Other Purchase Policy
International Buyers Attention Please:
* Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
* Please check with your country's customs office to determine what these additional costs will be prior to bidding.
* Serious Buyer Only! Please place bid or "Buy it now" only if you agree the price and terms of the product and no argument after the auction.
NAFULLPARTS All rights reserved. |
