Specification:
Wheel Bolt Pattern 6x5.5, 6x139.7MM
Vehicle Bolt Pattern 6x5.5, 6x139.7MM
Thickness 1 inch, 25mm per spacer
Thread Pitch 12mm x 1.5 or 12x1.5 or M12x1.5
Hub/Center Bore 106mm,
Package include:
4 x Wheel Spacers Adapters
Compatibility:
For toyota
1996-2022 For toyota 4Runner
2002-2022 For toyota Tacoma 4WD/Pre-Runner/VVT-i /6 Lug (Not fit 2WD S-Runner or X-Runner)
2000-2006 For toyota Tundra
2007-2022 For toyota FJ Cruiser
2001-2007 For toyota Sequoia
2004-2019 For toyota Ventury H200
2005-2022 For toyota Fortuner
2004-2019 For toyota Commuter 3.0 D-4D (not for 2.8 D)
For lexus
2010-2022 For lexus GX J150 GX460
2002-2009 For lexus GX J120 GX470
For hyundai
2001-2007 For hyundai Terracan
Do not fit
You could search this item id on ebay:284892347094
1984-1995 4Runner
1995-2001 Tacoma 4WD
1993-1999 T100
1979-1995 Pickup
1960-1984 FJ40
1969-1997 Land Cruise
Important Notes:
• Please make sure that these are the correct application for your vehicle. And confirm the PCD(Pitch Circle Diameter)of wheel adapters/spacers is consistent with your car. We do not guarantee all the vehicles can be fit for the wheel adapters/spacers, we only guarantee that you will receive the items described above.
• Please make sure the wheel adapters/spacers are fastened after installation.
• Installation by a trained professional is highly recommended, as the manufacturer or the brand won’t be responsible for improper installation.
• Each wheel should be tested again for dynamic balance after the wheel is installed on the vehicle to prevent abnormal wheel shaking at high speeds.
Benefits:
* Vehicles’ Stability Highly Guaranteed: The wheel adapters/spacers are specifically designed by in-house engineers and CNC machined to exact standards for well match your car. They are made of top-level aluminum alloy to ensure a longer service time and greatly improve the vehicle’s stability, especially when you drive fast and you are turning fast, they can reduce the risk of side roll-over.
* Enhance Vehicle’s Looking: The Set of 4 High Quality Wheel Adapters/Spacers will allow you to install larger and rigid tires and reduce the force of friction between the tire and the road, making your car look more fashionable.
* Improve Driving Safety: The wheel adapters/spacers will increase the vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better the traction is.
* Corrosion-wear Resistance: What makes our products special is that the top-level materials are corrosion-wear resistant, supporting your driving safety.
* Superior Customer Service: We provide a 5-year warranty and a 30-day free replacement. If you have any problems, just feel free to contact us via eBay Message, we are always here to support you.
What Do Wheel Adapters/Spacers Do?
• Avoid Side Roll-over: Wheel spacers can help to reduce side roll-over due to an increase in resistance, especially when you are turning very fast, so as to ensure driving safety.
• Provide Better Traction: After installing our wheel spacers, you can enjoy better traction when driving, so they will greatly improve your driving experience.
• Widen Tire Spacing: After the tire spacing is widened, you can enjoy more room for modification on your car's performance and look, such as installing a larger wheel.
Installation Steps:
Step 1:
• Following your vehicle owner's manual, properly raise the vehicle and support it using adequately load-rated jackstands.
• Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation.
• Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstructions which could prevent proper seating of the spacer/adapter.
Step 2:
• If proper seating can be achieved, apply provided thread locker to the vehicle's studs and mount the wheel spacers onto the rotor by torquing the provided wheel spacers/adapter lug nuts(No screw glue in our package). Tighten all lug nuts to the appropriate torque specification using a torque wrench.
• Install wheel onto wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
• DO NOT USE AN IMPACT WRENCH.
Step 3:
• Check that wheel and tire clearance allow for full steering(lock-to-lock).
• If no problrm, the vehicle can be lowered.
• Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.
Installation Advice:
• Clean the studs thoroughly and remove any excess dirt, oil, grease, etc.
• Highly recommended use a torque wrench while installing wheel spacers.
• Do not use automatic screwdrivers while installing wheel spacers.
• Please check all lug nuts and re-torque them after driving 20-60 miles, then re-torque them after driving 2000-3000 miles.
• Professional installation is highly recommended .
![](https://image.pushauction.com/0/0/9be0feba-6e2c-4614-9ff6-858ab4050933/83af812b-da3b-4f17-a600-900fac66e031.jpeg)
![](https://image.pushauction.com/0/0/9be0feba-6e2c-4614-9ff6-858ab4050933/cfbb34d6-2bf1-4929-b49f-15d52558f37f.jpeg)
![](https://image.pushauction.com/0/0/9be0feba-6e2c-4614-9ff6-858ab4050933/534b97db-7169-45cf-9795-6311fc48882d.jpeg)
![](https://image.pushauction.com/0/0/9be0feba-6e2c-4614-9ff6-858ab4050933/88f2452f-d27e-435d-b4d0-0888d5d7818d.jpeg)
![](https://image.pushauction.com/0/0/9be0feba-6e2c-4614-9ff6-858ab4050933/a433cb39-2a00-46af-afa5-8844f6f09c7c.jpeg)